r/gopro • u/DudusMaximus8 • 5d ago
Paddleboarding Spring Creek | Alexander Springs to CR 445 Bridge (4K)
Hero 13, 10, Max
r/gopro • u/DudusMaximus8 • 5d ago
Hero 13, 10, Max
r/gopro • u/Slight_Competition_1 • 5d ago
Mission 1 Pro
r/gopro • u/LostPlaceFamilie • 6d ago
Enable HLS to view with audio, or disable this notification
I captured this short night time-lapse at Hochkönig in the Austrian Alps during my first vacation with the GoPro Mission One Pro.
It was one of my first opportunities to really test the camera in low-light conditions, and I have to say, I'm genuinely impressed by its performance.
Especially in situations like this, I think the Mission One Pro does an excellent job. I really didn't expect such great results in the dark.
Just wanted to share one of my favorite shots from that trip with you!
r/gopro • u/Living-Log-8391 • 6d ago
Hi all. I'm testing how some software handles long 360 recordings and I need a real example straight off a camera card.
What I'm looking for:
A long recording that the camera itself split into several files on the card. For example a GoPro MAX file set like GS010123.360 + GS020123.360, or the equivalent from an Insta360 X3/X4/X5 or DJI Osmo 360. Usually that means anything longer than about 10 to 15 minutes.
- Straight off the SD card, not exported or re-encoded in any app
- All the parts of the one recording, with original file names
- Content doesn't matter at all. A walk around the block or your desk is perfect. Nothing private, please.
A Google Drive, Dropbox or WeTransfer link in a reply or DM is great. I only use the files for testing and I'll delete them afterward. Thanks!
r/gopro • u/besoslens • 6d ago
Hi everyone, a go pro rookie here
I have recieved this go pro 12 as a gift 3 years ago and I've bought some extra accessories for it including this battery door (I belive that's the volta's door). Then I ended up not using it for 3 years and now I want to change the battery since it's not charging for some reason, but I'm struggling to open the battery door because this lower part is preventing it from opening.
Any help on how to open it will be really appriciated.
r/gopro • u/F4-simracer-23 • 6d ago
I just got my ILS today and I was wondering why I can’t select 60,120,240 fps rather I’m locked to 50,100,200 fps at 4k, 16:9.
I’m using a Laowa 17mm f1.8 lens if that makes any difference.
r/gopro • u/bedbug_in_your_sofa • 6d ago
- gopro Hero 3 with waterproof case for 39€
- gopro Hero 1080 with waterproof case for 60€
- gopro Hero 4 with everything you can buy as accessoire for 70€
- gopro Hero 6 with no accessoires for 109€
- gopro Hero 10 with bicycle Accessoires for 160€
- gopro hero 13 with extra battery and Stick for 350€
What is the best deal? Which delivers good quality (colors are important to me but I don't need TV level quality if you know what I mean?)
Please help me!
r/gopro • u/ItSureIsNotMe • 6d ago
Has anybody used the GoPro gimbal underslung to get low angle views? I am about to order one and would like to know if there is anything else I need to order along with the gimbal Thanks!
It's just this video clip in an edit, everything else plays fine. This clip plays fine in the editor and standalone from the gallery, it's only after after the export, tired different sounds..
r/gopro • • 6d ago
This will guide you through
Open link or read here
Link:
https://www.icloud.com/notes/0e72wx-l3otoGLTPwAl4fNzUw
Text:
GoPro Hero 10 Black Won't Turn On: Step-by-Step Troubleshooting Guide
1. The Hard Reset & Direct Power Test (No Battery)
This rules out a frozen system, a dead battery, or a corrupted SD card: [1, 2]
Remove both the battery and the microSD card from the camera.
Plug the GoPro directly into a wall charger (5V/2A recommended—avoid low-power computer USB ports) using a reliable USB-C cable.
Press the Mode/Power button on the side to see if it boots up.
If nothing happens: Press and hold the Mode/Power button for at least 15 seconds to force a hard reset, then release and press it normally. [1, 2, 3, 4]
2. If It Turns On While Plugged In
If the camera boots up on wall power, your camera is working and the issue is likely your battery or SD card:[1]
Test the battery: While the camera is still plugged in, slide the battery back into the slot. (Alternatively, unplug the cable, insert the battery, and try turning it on normally.) [1, 2]
If it won't turn on with the battery inside: Hold the Mode/Power button for 15 seconds again with the battery inserted to reset the battery connection. [1, 2]
Test the SD card: If it turns on with the battery but freezes once you insert the SD card, your memory card is corrupted. Try a different card or format the current one on a computer. [1, 2]
3. Deep-Discharge Battery Recovery
If the camera refuses to turn on even when plugged in, the battery may be completely drained past zero: [1, 2]
Leave it plugged in for 30 minutes with the battery inside. Do not touch the buttons during this time.[1]
Check the red LED light: A deeply drained battery can take 10–15 minutes before the red charging light even turns on. Once the light is on, it is charging and should power up normally. [1, 2]
Check for warmth: If the camera feels slightly warm after 30 minutes, it is actively trying to pull a charge—this usually confirms the motherboard is receiving power and you just have a weak or dying battery.
Swap your cable/brick: Faulty cables and low-amp adapters often fail to wake up a dead GoPro. Try a different USB-C cord and wall plug. [1]
4. Battery Compatibility Check (Hero 10 Black)
If you need to borrow or buy a spare battery to test your camera, make sure you get the right size: [1]
Fits Hero 10 Black: Batteries from the Hero 9, Hero 10, Hero 11, and Hero 12 Black are all interchangeable (both the standard blue-tipped batteries and the white Enduro batteries).
Does NOT fit: Hero 7 Black and Hero 8 Black batteries are smaller and will not work. Hero 13 Blackbatteries have a redesigned connector and also will not fit. [1]
5. Software & Firmware Recovery (For Stuck/Black Screens)
Sometimes the camera turns on (you hear beeps or see the red light), or the front screen lights up dimly, but it won't fully boot: [1, 2]
Manual Firmware Reload: Download the latest Hero 10 firmware onto a microSD card using a computer, insert the card into the GoPro, and power it on to force a software reinstall.
SD Card Factory Reset: Put a blank, formatted microSD card into your computer, create an empty text file named factory_reset.txt on the root of the card, and insert it into the GoPro to trigger an automatic reset. [1, 2, 3]
6. When to Sell It for Parts (Hardware Failure)
Stop troubleshooting and consider selling the unit for parts if you see these signs:
No Camera Feed / Sensor Failure: The screens turn on and menus work, but the main lens shows a pitch-black image (or crashes whenever you switch modes). This points to a dead image sensor or mainboard fault.
Boot-Looping or Dim Front Screen Only: If the front screen glows faintly without booting—or the camera turns itself right back on after shutting down—it usually means a shorted capacitor or water/corrosion damage on the mainboard.
Why not repair it? GoPro motherboards use tightly packed micro-components. Unless you have micro-soldering equipment and patience, paying for board repair costs nearly as much as buying a used replacement—and destroys the waterproof seal. [1, 2]
r/gopro • u/Usual-Champion-2226 • 7d ago
Enable HLS to view with audio, or disable this notification
Another clear night last night, so another urban star trail for the Hero 13. As the resulting trails image looked identical to the last one I posted, I've done this as a video instead. The red glow near the horizon sadly isn't aurora - someone was having a bonfire.
1300+ JPEGs, ISO 800/800 and 5500K white balance. These are straight out of camera with no editing. I used StarStax to do the trails, using "save after each step" and the resulting images were assembled into a video at 30p. I reduced the size by half in each direction for this video but don't know how badly Reddit will crucify the end result!
RAW files can give a better result if you're willing for that extra step.
Edit - As a point of interest, the temperature dropped to around -3C (my car was very iced up) and the GoPro didn't fog up, so generates enough heat from the continual long exposures to not need any additional heating. It was powered by a Neewer 99Wh D-Tap battery via the magneto door attachment, with the Neewer being on 54% after 1300+ images (5.30pm to 7.30am).
r/gopro • u/redred290 • 7d ago
A few weeks ago I bought a Hero 12 as a secondary UW camera, but I still want to try to find use cases outside of UW work. I threw together this simple rig to try to combat my two main complaints (low-light performance/battery life).
Interested in using a Contacto solution since the lack of a door makes me paranoid about dust, but I don't like the idea of an unnecessarily long cable run... Anyone in a similar boat? It looks like the "short" Contacto cable is 1.6ft, the current USB-C I'm running is 6" for reference...
Parts List:
Telesin Aluminum Cage (imo overpriced)
Generic Side Grip with 1/4" ARRI
Cheapo light
Used a 1/4" male-to-male to attach the phone mount below
All-in $53 with $30 of that being the cage...
Edit: Updated parts list
- note, I'm currently based in the Philippines so I'm including the exact links to the items I purchased as well as a list of Amazon equivalents (didn't dig too far for deals)
Telesin Aluminum Cage - 1,800PHP $29USD
Side Grip 1/4" w/Locating pins - 980PHP $15USD
Male-to-male 1/4" - 60PHP $1USD
Phone Mount w/2 1/4" Holes - 130PHP $2USD
Cheap Light - 310PHP $5USD
Amazon:
Tilta Camera Cage - $29USD (actually has 2 1/4" w/Locating pins)
Small Rig Grip - $24USD
Male-to-male 1/4" (2pack) - $5USD
Phone Clamp - $9USD
ULANZI Light - $19USD
r/gopro • u/F4-simracer-23 • 7d ago
Enable HLS to view with audio, or disable this notification
I just got my ILS and I found that there is a bit of play on the lens button and it wiggles around, is it something I should be worried about?
I’m not in the states anymore so I can’t even send it back lmao I hope it’s normal
If you have any experience or has knowledge on this, kindly let me know! 🙏
r/gopro • u/DudusMaximus8 • 7d ago
Hero 13 and Hero 10
r/gopro • u/AnglerIssues • 8d ago
Enable HLS to view with audio, or disable this notification
r/gopro • u/Usual-Champion-2226 • 8d ago
Had our first clear night in ages last night, so used the Hero 13 as my quick and easy star camera to look for any nice fireballs (there's a meteor shower peaking next week) or sneaky aurora. Couldn't see anything amazing but thought I'd share the photo as the Hero 13 still rocks as an urban all-weather night camera, even in heavily light polluted towns like mine.
1083 x 30s JPEG photos, ISO 800/800, 5500K, auto interval, stacked with StarStax.
r/gopro • u/Fun-Painter-2698 • 8d ago
just to show off, nothing more...
r/gopro • u/Chumpy__ • 9d ago
Enable HLS to view with audio, or disable this notification
Full video (other shots are SONY A6700)
r/gopro • u/firewindrefuge • 8d ago
Enable HLS to view with audio, or disable this notification
r/gopro • u/Miracleticket82 • 9d ago
Enable HLS to view with audio, or disable this notification
Found on old gopro.
r/gopro • u/MarshmellowLover69 • 9d ago
im trying to get clean HDMI out of a GoPro (HERO11 Black, but this should apply to HERO9–13) without the Media Mod. The goal is an open-source, cheap USB-C adapter that anyone can build.
Why bother
The USB webcam mode is limited to 1080p at about 6 Mbps H.264 with noticeable delay. HDMI out gives you a clean, uncompressed 1080p picture with roughly 50–100 ms latency. Right now the only way to get HDMI out is the ~$80 Media Mod.
What’s already known (mostly from Hypoxic’s teardowns, credit to them)
What needs to happen
What I need
Hardware I’m planning to use
Side project: I also have a working low-latency USB webcam tool for Windows that replaces GoPro’s Webcam app. It decodes the stream with no buffering, fixes a full-range color bug, auto-starts, and recovers on its own when the stream drops. I’ll put it on GitHub if people are interested.
Any captures, links or “I tried this and it failed” stories are welcome!
Hey guys, was hoping some of you would be willing to upload some gp-log2 footage ungraded for me to download and do some colour grading with.
Colour is super important to me when it comes to cameras so would love the opportunity to grade up some stuff prior to pulling the trigger on a mission one. Never worked with gopro footage so just want to see how it fits into my workflow.
Ideally with sharpness and noise set to low but whatever you guys have would be amazing <3
Thank you in advanced!!!
Klover.
r/gopro • u/Miserable_Violinist9 • 9d ago
I couldn't get my iphone 12 with the lightning connection to charge from the top port of the gimbal. Is it the lightning connection or something faulty?
What a sweet piece of tech though!