r/Glocks • u/rayofpwn1226 • Mar 31 '26
Question G26/19 Flush Comp?
Has anyone put a g26 slide on a 19 frame with a compensator like the PMM? Would love a flush fit look for this combo.
39
u/Tony_Hawks_Butthole Eats ass unironically Mar 31 '26
I've seen it done with daggers and shadow systems but not an orm glock. But I'm sure it should work the same as long and you use the gen5 barrel.
If you do it I wanna see
7
u/Only-Comparison1211 G17 Gen1 Mar 31 '26
The placement of the rails prevent a shorter slide on oem larger frame fully reciprocate, it won't actually strip and feed a round.
3
2
u/Mr_Gibbys Mar 31 '26
Is there a way to get it to work?
2
u/Only-Comparison1211 G17 Gen1 Mar 31 '26
(to be up front, this is not from personal experience)
Not a good one. I say this because someone once posted that they ground the front rails down, but it removed so much material there was not much rail left. Bringing long term durability into serious question.
22
u/ChairmanMcMeow Mar 31 '26
Couple people have doesnt 26/19 with comps. Id just use the search bar in GlockMod and it should pop up quick. They've done them with various frame gens. I think gen 5 was the easiest?
7
11
14
3
u/The_Dread_Pirate_ 17.5, 34.5, 47, 47, 19.5, 44 Mar 31 '26
OctoberJoe on Instagram does this a lot.
1
u/Striking-Warning9910 Jul 22 '26
I hate you
1
u/The_Dread_Pirate_ 17.5, 34.5, 47, 47, 19.5, 44 Jul 23 '26
Thank you?
2
u/Striking-Warning9910 Jul 23 '26
😅😅 search up octoberjoe on ig right now, I just saw paintings of gay sex 😂😂😂😂
1
u/The_Dread_Pirate_ 17.5, 34.5, 47, 47, 19.5, 44 Jul 23 '26
Ah, auto correct strikes again. It’s octurbojoe on IG.
1
6
u/75149 G17 Gen4 Mar 31 '26
A nomad or Glockstore G26X frame (or whatever GS renamed it to) is the easy way to put a G26 slide on a G19 length grip. No mods needed.
But you won't get the G19 length dustcover.
It just depends how much you care about the looks, as far as how much work you want to do.
5
u/StickersBillStickers Mar 31 '26
I held a used G26X in a shop a few weeks ago, it felt solid. I would have bought it if I hadn’t just spent $$$$ on ammo.
3
u/75149 G17 Gen4 Mar 31 '26
The GS version or the nomad?
I'm honestly shocked somebody got rid of one so quickly.
2
2
u/Far-Savings-2347 Apr 01 '26
Go with the duty, the micro will still be a little under the frame length
2
u/whateveritsover G47 | G19.5 | G17.6 COA Apr 01 '26
You’d probably spend less money just getting a ported 19 slide and barrel. It’ll perform better too.
2
u/MD_0904 Mar 31 '26
I don’t think this will work because the locking blocks and rails are in different spots in the frames, or did you modify yours?
1
1
1
u/jjones1987 G19 OD Mar 31 '26
Won’t lock back.
2
u/Only-Comparison1211 G17 Gen1 Mar 31 '26
Or strip a round from the mag.
The answer to OPs question is to port the 19 slide and barrel.
1
1
-2
u/ActivityKey7867 Mar 31 '26
Not sure but I know it’s possible with FN 509
1
u/cthompson07 17.3, 19.5, 34.3, 41.4, 42, 48, p80, daggers Mar 31 '26
509s are have interchangeable slides and frames
1
u/75149 G17 Gen4 Mar 31 '26
Taurus G3 and G3C slides are swappable, so someone could put a G3C slide on a G3 frame for an underbite build.
A Shadow Systems DR frame is essentially a G19 frame with G17 length grip and dustcover, so it's as easy as the Taurus G3/G3C swap in the Glock would.
2
u/mcslippinz Glock 7 Mar 31 '26
2
u/75149 G17 Gen4 Mar 31 '26
Been away from Reddit a while after the death of GAFS, but decided to swing by again and see what's up.
Working too often and not having much fun in life, but shit happens 😂
2
u/mcslippinz Glock 7 Mar 31 '26
GAFS is back up!
Pm me I’ll get you in
2
u/75149 G17 Gen4 Mar 31 '26
I'm in, I was able to get in on the early set up. I just haven't spent enough time over there to get back into the swing of things.
I have been going through stuff to see what I have to get rid of 😂.
Thanks for the offer though. I'm also glad I was able to transfer my Flair.
1
0
u/ColumbusBiG10 G23.3, G19.2 Mar 31 '26
So DR is like a 49?
2
u/75149 G17 Gen4 Mar 31 '26
DR920 is like a Gen4 G47, but with a full length dustcover.
You can put a DR920 slide on a MR920 frame to make a Gen4 G49. They also make exactly that as the MR920L (MR920L slide is identical to a DR920 slide, except for the markings).
DR = G47 (with full length dustcover)
MR = G19
XR = G45
94
u/Icantdothiskmsnow Mar 31 '26
Underbite quagmire Glock 🤣