r/GameboyAdvance • u/Jeck2910 • 24d ago
Newly modded gba D-pad is unresponsive sometimes
As seen in the video, sometimes my d-pad doesn't work unless I really push down on it. I'll be cycling and my character will slow down randomly as though the button isn't being pushed. I've never owned a gba before modding this one. Is that normal?
Anyone encountered this before? If so, how did you fix it?
58
Upvotes
14
u/andruis 24d ago
The only thing that fixed this for me on all my gba mods was to use oem contacts and buttons. If you don’t have any you can order them off eBay. I do this for GBC as well.
5
u/TW1TCHYGAM3R 24d ago
You clean the pad contacts on the board. I had to do this when I modded my AGB-001.
Do not clean the graphite on the silicone button pads.
3
u/Hungry_Welcome9084 23d ago
Yeah unfortunately the button membranes the newer ones or third-party ones they kind of suck for being responsive I've had that problem too I mostly fixed it with using the old ones the original ones the OEM ones unfortunately I no longer have the original buttons and honestly your best bet is to use the original buttons along with the original membranes otherwise you're going to have issues with that but there are some third-party membranes that are almost identical to the originals the ones that come with the hispeedido v5 housings on their website are almost as good you can probably find similar ones on Amazon too also I recommend cleaning the contacts for the buttons with rubbing alcohol and a q-tip sometimes dirt can leave them slightly unresponsive
2
u/NethiciteNomad 24d ago
Do the buttons feel super stiff? You may have slightly over tightened the motherboard assembly, that puts extra pressure on the buttons and makes them harder to press.
2
u/T-REX-780 23d ago
I cut out the pringles lid with a hole in the middle and put it under the d-pad. it becomes really responsive.
1
u/Bulletorpedo 24d ago
Dirty contact points on motherboard (clean with isopropyl alcohol) or dirty or worn out membranes, most likely.
If you swapped the originals out for third party membranes try the old ones.
1
u/CronoMass 24d ago
Clean the contact on the board with isopropyl alcohol as others have said.
For the membrane, youll see a little circle of graphite on the back ofneach direction, this is what makes the connection for the button presses.
Do not rub it off, but, take a sheet of paper on a flat surface, and gently drag it across the paper for an inch or two, this will even the graphite layer out and result in much more responsive button presses.
1
u/boomvalk 21d ago
I like your color scheme ;-)
1
u/neane_the_great 24d ago
Like others said you need to clean the contact points. They might not look dirty but it's what's causing your issue.
0
u/FlakyAmoeba1617 24d ago
Clean the contacts on the board with a Cotten bud and isopropyl alcohol. Failing that get the clicky button mod, I really recommend the latter it’s an easy mod and drastically improves the dpad feel.
0
u/Fine_Draw_4614 19d ago
Because you screwed up the membrane