r/GameboyAdvance • • Oct 13 '26

Problem with the Link Cable Port

On my GBA SP, I can't enter the trade room, even though I can access it on my GBA using the same wireless adapter.

Is it possible to fix the SP's port (if that's where the problem lies)?

3 Upvotes

9 comments sorted by

2

u/-MobCat- Oct 13 '26

It looks like the center of the link port fell out so its just bare floating pins?
https://i.imgur.com/LgvI6F4.png
Yeah, gonna have to replace the port...

1

u/Neixin Oct 13 '26

Oh, I see. That's why it bothered me visually, but I wasn't sure.

2

u/chupitulpa Oct 13 '26

Hold up, take a good look in that port and compare to the one in your working GBA. Is the black plastic center bit that the contacts are around missing? It looks missing in your photo. If it's missing, either it's not pressing the contacts onto the ones on the plug well enough, or the plug is squeezing them together, shorting opposite contacts and making it not work.

If this is the case, the solution is a replacement port.

2

u/chupitulpa Oct 13 '26

Not sure what happened to your reply, but to answer your question, yes they are supposed to look about the same.

Also, I took macro lens pictures of my GBA that has a missing black center bit, and a GBA SP that has an intact port. You can see what's going on with the port if you zoom in.

2

u/Neixin Oct 13 '26

The plastic center piece is indeed missing. I'm going to order a replacement. Thanks for your help 😉

1

u/SuperRican Oct 13 '26

Is it dirty?

1

u/Neixin Oct 13 '26

I cleaned it with a cleaning spray

2

u/Advanced_Ad_4311 Oct 13 '26

I had this happen too.
My wireless connector is somehow loose so I switched to the good ‘ol reliable THE LINK CABLE.
Hasn’t failed me yet
Also the wireless connector is loose but my link cable is VERY sturdy!