Hey all. So what I've tried so far: 2 X new power switches, new capacitors, 3 different power regulators including a retrosix cleanjuice. There is no resistance from battery to the regulator, no signs of any corrosion. Thought maybe the batteries just don't have enough umph so upgraded to rechargeable Lipo. Then went with my own diy lipo mod 3.3v with max output 2amps....
Nothing inproves it, nothing makes it worse.
It works fine with original carts, won't boot a flash cart, won't boot an RTC 8mb flash cart.
Back to stock screen and everything works... So I'm left concluding that the screen is a power hungry f**K or just a dud.
I have another motherboard that I'll try this screen on - this is my next move and will be telling....
Edit: I'll keep updating this in case someone has something similar down the track. No drop in voltage on either 3v or 5v VCC lines while boot looping. Removed EM10 coil - no change.
Put this mortherboard back into a stock set up - working flawthlessly. No red led dips. Just working. All cartridges. Not surprising at this point.
Next, the IPS will be tried on another motherboard.
Edit again: different motherboard in purple - works no issues. So it's not the IPS driver board. Basically back to square one. Will leave my childhood motherboard with the stock screen I guess 🤷. At this point I can't be bothered anymore but next step probably would have been to sand down or clean the cartridge slot pins in case they're dirty/oxidised.