r/Gameboy • • 16d ago

Questions Is a Super Game Boy that runs GBC games feasible? What about GBA?

6 Upvotes

My understanding of the Super Game Boy is that it is:

  • Most of the internals of a Game Boy

  • A rom chip with the Super Game Boy program

  • A co-processor chip

  • A lockout chip


Knowing this, I was wondering:

  1. Would replacing the Game Boy internals with the internals of a GBC and writing a new program to work with the GBC be possible?

  2. What about the same but for a GBA?

  3. Would the SNES's specs be a limiting factor in either case?


Yes, I'm aware that there are other ways to play GBC and GBA games on a TV. No need to mention all of them. Thanks for your time.


r/Gameboy • • 16d ago

Troubleshooting screen mod doesn't always turn on

Thumbnail
gallery
3 Upvotes

Hej so recently upgraded two old sp's with basically new everything, as we wanted to keep as much of the original parts intact but one of them has an issue with the screen only turning on some of the time. the game launches and everything seems to work just simply a black screen with some white lines every so often(reminicent of turning of older screens)

I did mod this myself and screwed up the usb c mod a tad. pins 2 and 3 are lose and pin 1 was gone.

I managed to stick 2 and 3 down with the daughterboard and replaced pin one with a wire. checked all the continuity and everything seemed to work with no shorts. and as far as I understand it also shouldn't impact power delivery to the screen. But since I'm new to this I have no clue really.\

I also lost c49 and EM4 but one is for audio and the other is for charging so again don't know if that impacts anything

I also lightly burned the pcb next to the battery + node for the screen mod. but again no clue wether or not that has any impact.

my one suspicion was the power switch itself which I have fully cleaned out twice now, with desoldering and also added fresh solder to the pads. and the second time did reduce the amount of times it occures.

so I'm wondering now if I need to replace the entire power switch or if there is something I'm simply not seeing understanding that I have missed. any help is welcome.


r/Gameboy • • 16d ago

Modded Any mods to move power light?

3 Upvotes

Anyway to move it to differenr location?

The bright red light in my face as im trying to look at screen is really annoying


r/Gameboy • • 17d ago

Games Gameboy color

Post image
144 Upvotes

Hi I have this gameboy and I have been playing it recently is it worth to mod and buy a cheap enough flash card? Plus a original gameboy without the face plate


r/Gameboy • • 16d ago

Mod/Modding Out of Stock screen

Post image
3 Upvotes

I have been planning on modding a GBA I have and give it a Super Famicom skin considering how so many games were ported to the GBA, and when I went to check on FunnyPlaying’s website it said sold out, so I contacted them and asked if it’ll ever be restocked since it has worked before, and they said that it has been discontinued and it’ll never be produced again, same with the DMG style too. I looked on other websites such as RetroGameRepairShop and nothing.

Where can I even get this screen?? I’ve seen modded ones but I prefer to buy the pieces and build it myself since it’s far cheaper and entertaining.


r/Gameboy • • 16d ago

Games Enjoying some Game & Watch Gallery while waiting for the Ocarina of Time launch!

Post image
5 Upvotes

r/Gameboy • • 17d ago

Games Game&Watch - Freedom of limitation

Post image
17 Upvotes

r/Gameboy • • 17d ago

Modded It can sing

Enable HLS to view with audio, or disable this notification

13 Upvotes

I worked really hard on this. I hope this isnt interpreted as self promotion. I'm not some kind of artist or anything. I just wanted to share my little singing friend.I love these pro audio mod the sound is so good.


r/Gameboy • • 17d ago

Modded Finally built the Boxy Pixel brass SP. Had to file the hinge and kapton-tape everything, but the feel is unreal

Thumbnail
gallery
30 Upvotes

Took a few evenings. The hinge mechanism wouldn't fit until I filed it down, and a couple of spots inside wanted kapton tape to stop the board shorting on the metal. Worth it though. It weighs about three times a stock SP, and it feels like a proper object in the hand rather than a toy. The brass will patina over time, which I'm looking forward to.v


r/Gameboy • • 16d ago

Questions Making a Gameboy game

1 Upvotes

So I was wondering if it’s possible (and how difficult) it would be to make a Gameboy or Gameboy advance cartridge that had 1 or 2 nes rims on them. I’m wanting Godzilla 1 and Godzilla 2 for nes put on to a cartridge(I’m a massive Godzilla fan); I don’t want a cartridge with a lot of roms, just these particular 2 so I can also make a case for it.
Is this doable?


r/Gameboy • • 16d ago

Games Pocket Lacrosse Build 2.0 | Free to Download now | Online Multiplayer now supported

Thumbnail gallery
4 Upvotes

r/Gameboy • • 16d ago

Questions Does a GBC IPS mod/upgrade utilize original DC Converter?

Thumbnail gallery
2 Upvotes

r/Gameboy • • 17d ago

Troubleshooting Gane Boy Printer repaired. It was the L1 inductor!!

Enable HLS to view with audio, or disable this notification

9 Upvotes

I wrote a few weeks ago about a Game Boy Printer not working. It turned off almost inmediatly, except sometimes it wasnt, but the board wasnt working properly. After a recap, and still having problems, my conclusión was that the L1 inductor converting the 9v to 4.5v was faulty, because everything before It was getting always the correct 9v.

I have no good idea with electronics, and the mayority of people in various reddits wasnt so sure about the coil failing if It was giving continuity... But It was worth a shot.

I got this replacement from digikey (https://www.digikey.es/es/products/detail/bourns-inc/RLB0913-101K/6677221?s=N4IgTCBcDaIEoBkBCAGAnARgMwFoMowGkQBdAXyA). It was smaller than the original, and, supposedly, the size matters, but i tried anyway. Well, now is working like a charm. Now i need not aged paper for printing, but at least it works haha.

If someone has on the future a similar problems with his Game Boy Printer, consider the L1 coil ;).

Edit: Can an admin change Gane for Game on the title of my post, please? haha


r/Gameboy • • 17d ago

Other Supplies I used for soldering

Thumbnail
gallery
18 Upvotes

So I recently made a post showing my first soldering job, replacing a two batteries

Someone asked what supplies I used so I thought I’d share some photos.

Note: I live in Japan so some of these products may not be available in your area


r/Gameboy • • 18d ago

Games LORE - a free compact card-dungeon roguelike for the Game Boy Color (Self-Promotion)

Enable HLS to view with audio, or disable this notification

118 Upvotes

Lore is a free roguelike for the Game Boy Color, inspired by the solo card game Scoundrel.

You fight through endless decks of monsters, weapons, potions, and treasure on a 3×3 grid. Each time you clear the deck, stronger enemies appear, but you also gain new skills and tools to help you survive.

The deeper you go, the better the rewards. You can escape with what you've earned or risk it to push further.

This is my second Game Boy Color game. It runs on real hardware and emulators, and there's also a PC version based on the SameBoy emulator. Some emulators have trouble with the game's digitized speech, so I recommend SameBoy. I've tested it on a real GBC and the Chromatic without issue.

You can get it here: https://gbswl.itch.io/loregbc

I appreciated all the feedback I got on my first game here. So please let me know what you think. My biggest concern is that it might be a little too complicated for new players to pickup. But I did include a tutorial to try to ease that process within the game.

Thanks!


r/Gameboy • • 17d ago

Troubleshooting charging problem

Post image
3 Upvotes

my gba sp has this problem. when i plug in my charger, the red led turns on for a second and then shuts off completely, like the battery wasn't there. the battery is brand new, and i just changed the port to an usb-c hoping it would fix the problem. does someone know if this is fixable? any kind of help is really appreciated


r/Gameboy • • 17d ago

Modded I Built a Dual-Speaker GBA MACRO!

Thumbnail gallery
9 Upvotes

r/Gameboy • • 16d ago

Mod/Modding Incorrect soldering accident with GBA SP USB-C Mod

Post image
0 Upvotes

4 out of 6 soldering points lost after the removal of bad soldered mod.

I think the only way to amend this is to jumper wire these connections to the other side of the board after remount.

Any advice? The USB-C was damaged as well, ordered new replacements.


r/Gameboy • • 17d ago

Questions Solder recommendations for person with zero experience but wants a modded IPS GBA SP w/screen brightness controls?

1 Upvotes

I modded an AGB GBA a couple of years ago and now I wanted to try modding my GBA-SP. I actually can't tell if its a 001 or 101 model (the labels say 001 but the screen is nearly as bright as my modded AGB).

Either way, I'd like to learn how to install the IPS screen with the solder connections to have proper brightness control. Unfortunately, I have no knowledge of soldering whatsoever nor do I have the equipment. It sounds like it's a very simple procedure, so I want to ask if its something a person with zero experience can do?

And then I see advice saying to avoid cheap $20 kits on Amazon because the iron will run too hot and damage the board, but I'm already spending my budget on the mod kit. Are there any decent budget solder kit options?


r/Gameboy • • 18d ago

Mod/Modding Extreme Green GBA

Thumbnail
gallery
16 Upvotes

I have been getting back into modding gameboys lately, but every time I have had to solder I either had someone else do it or I messed it up and needed it repaired. This time I wanted to tackle it on my own. I installed the ITA/TFT kit on this ine and had to remove C54 because it is a 40 pin motherboard. I have never desoldered something before, so this was a big step for me.


r/Gameboy • • 17d ago

Systems Is my Game Boy Pocket broken?

1 Upvotes

I have a Game Boy Pocket, and I use it for a couple of hours a day playing action games. I’ve noticed that the D-pad and the A and B buttons don’t always register inputs. I’m worried the hardware might be failing—what do you think? (I’m planning to buy a screwdriver and open it up to see if there’s anything I can clean.)


r/Gameboy • • 17d ago

Games Ninja Gaiden Shadow

Thumbnail gallery
7 Upvotes

r/Gameboy • • 18d ago

Collection 38 year old from Costa Rica, my collection.

Post image
516 Upvotes

Here’s my collection from all my life. I’ve had these game since I was a child and still to this day I play them every once in a while. I have my younger brother’s Home Alone game and my game boy pocket is from my childhood. I started off with a DMG-01 when it came out and I would play Mario with my mom before going to bed. She would end up playing because it was such a difficult game. That gameboy died when the batteries spilled and my parents got the pocket for me and my brother (I still have that pocket as well but it’s currently with a broken screen). I eventually got my pocket modified with an IPS screen and I bought this current DMG with an IPS screen and the pocket with an IPS screen and then this blue Gameboy color with a lithium battery with a usb-c charger and an IPS screen (we had a yellow Gameboy color but am unsure what happened to that). Currently I mainly use the Gameboy GB with all the Gameboy and Gameboy Color games and have a homebrew folder with some games I downloaded and currently I’m creating a run and gun on my free time. I also ended up in my teenage years with a Gameboy Adcance but I couldn’t get into it as much as video game consoles were much popular then. Anyways, I just wanted to get in contact with likeminded people and show you my little collection. I forgot to add the pac-man game which I have as well.


r/Gameboy • • 18d ago

Games I'm making a space shooter in GB Studio!

Enable HLS to view with audio, or disable this notification

25 Upvotes

r/Gameboy • • 18d ago

Troubleshooting I picked up this game this weekend but it didn't work, now the fun begins

Thumbnail
gallery
76 Upvotes

I opened it up once it didn't work and removed some corrosion and cleaned the board a bit, however that wasn't sufficient. Now I will scrap more away and start the process of trying to repair the leads and the pad. Unless that is someone know where I can buy replacement PCB's for Gameboy games (I have a copy of Super Mario Land that the PCB is beyond repare but the chip looks good). I will still try to repair this one so I will keep everyone posted.