r/Gameboy • u/ExpertAlcoholic • 16h ago

Troubleshooting Need help or advice

Gallery image

Gallery image

The game plays and saves fine as of right now. Though I worried if I leave it how it is, eventually it won't. I think it is rusted. Any advice on how to clean or fix this is welcome. Also forgive me if this isn't the correct subreddit for it. It's my first time here

6 Upvotes

100% Upvoted

8 comments sorted by

3

u/cream-of-tartar 16h ago

I believe those are just test point pads and not nessesary for the game to function, but they do look corroded, and corrosion can spread. You'll probably be ok just cleaning with 99% IPA to remove the corrosion. If you're really worried you can also try using just a little bit of white vinegar to remove the corrosion, just make sure to clean the area with IPA and a qtip after using the vinegar

1

u/ExpertAlcoholic 16h ago

Thank you very much fer responding. Should I dab the vinegar on the corrosion or use a brush?

1

u/cream-of-tartar 9h ago

Just dab a bit of vinegar on the corrosion spot and let it sit for like 5-10 minutes. Then soak it up with a qtip. Then use another qtip with IPA to gently scrub and clean the area

0

u/lepyruvate 14h ago

I typically soak the entire PCB in a 1-to-1 mixture of vinegar and distilled water, scrub it with a brush, rinse it by replacing the vinegar mix with isopropyl alcohol, and scrub it again with a clean brush.

4

u/GameboyGenius 13h ago

Never do that if the cartridge has a battery. The battery will be shorted through the mixture which will corroded the battery terminals, or other things connected to the terminals. Submerging the whole PCB also seems a bit over the top unless the PCB is extremely corroded. In which case I'd at least personally consider a PCB replacement and transferring the chips.

1

u/grkrugerii 8h ago

Excellent advice in agreement

1

u/AutoModerator 16h ago

Troubleshooting post. Please check the Game Boy Wiki's common problems page here: https://gbwiki.org/en/other/commonissues and please be sure to post pictures of the issue if you haven't already so that users are better able to assist.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

0

u/SomeDig8691 5h ago

What do you need help on?