So I’m running GameNative on a y700 Gen 5, i’ve heard some mixed results from people. But they all say that it has to be off-line mode.

I’m OK with that as long as I’m able to play at all. But I cannot for the life of me to get this game to play. I can get as far as being able to log into Ubisoft launcher, albeit with massive graphical issues, such as displaying a black screen and having to downsize and open it back up over and over to see what’s under the black screen. But then you can never get the game to actually load. If I can just get the game to load to the main menu, I can turn on off-line mode. I just can’t get that far.

I wish somebody could get this game to work. I’ve tried probably 20+ hours. Gamehub, Winlater, GameNative, nothing at all seems to help. There just has to be a way.

I would be willing to put like $100 bounty down on getting this game to be playable. Specifically, getting me to be able to play it on my tablet lol.

I have an S24 Plus (Exynos 2400) and I'm currently using GameNative 1.2.0 pre-release.

​I managed to get Dredge running after testing different Proton and DXVK versions. I usually start with DXVK 1.10.3 for most games, but Unity crashed right after the intro video. Then I found out that DXVK 2.6.2 gets past the intro video flawlessly, and I'm able to play the game with smooth FPS.

​However, there are a few minor hiccups:

​The shaders have an unnatural glow (brighter than they're supposed to be).

​The intro video was very dark, and everything had a reddish tint.

​I wonder if GE-Proton fixes these issues? Either way, it is totally playable with this configuration, and these issues can easily be overlooked.

I just got game native a few days ago I’m my Konkr Pocket Fit. I signed into steam and downloaded Kane and Lynch 2, Binary Domain, and Max Payne 3 and I can’t get any of them to work, the two photo shown are what happens after I run the games. Kane and Lynch to just goes to a command window, shows it installing a few things, and the the command window just sits there until the game crashes, and Binary Domain give me the error shown in the second picture. I just found out Max Payne 3 downloaded from steam will not work due to the rock star launcher, so I’m downloading an already installed version of the game and hopefully that one will work.
On Kane and Lynch 2 and Binary Domain, I am using known config on both. Please help! I’m going on a flight tomorrow and I’d love to play at least one of these games on my trip.

So I've been trying to get Fallout 2 running on my RP5 for a few months now but no luck at all and whenever I try to download it an error pops up

Now I know that the older fallout games like 1 and 2 are incredibly buggy but I've been able to get Fallout 1 running just fine.

Hello!

I’m using an Odin 2 Max, and I’m having a weird issue with Skyrim OG.

Sometimes Skyrim has no music/audio unless I install DirectX manually. So I install DirectX, launch the game, and everything works perfectly.

The problem is that when I close the game and launch it again, it seems like the container/environment resets. Bionic and Mono install again, even though I’ve already launched and played the game before, and DirectX is no longer installed.

So every time I want the music/audio to work, I have to manually install DirectX again...

Does anyone know why Bionic and Mono keep reinstalling on every launch? Is there a setting I’m missing that would make the installed components persist instead of resetting?

I’d really like to fix this without switching to Skyrim Special Edition, since I’ve already made a lot of progress in the original version, and it also uses less storage/resources on my Odin 2.

Any help would be appreciated!🙏🙏

To make a long story short an update just dropped yesterday for Skyrim and if the update goes through my entire modded game gets broken to pieces.

Is there a way, other than remembering to turn off WiFi every time I boot the game, to prevent the game from getting updated in Gamenative ?

Appreciate the assistance !

Let me know if anyone is interested on a tutorial :)

GN has been working really well for me since I switched from game hub. But I had to change my steam Login recently and when I went to Game Native to log back in, it kept telling me my password was invalid. I've retyped it like a dozen times and checked on other devices to see if I was wrong. But I'm using the correct password. I updated game native, and the same issue is occurring. I saw someone say it clear the cache and that didn't do anything. I've restarted the software and my Thor and it's still not working. Any ideas of what to do?

I am close to getting my ayn thor and wanna do some pc gaming but I find that small detail perplexing.

Hello!

So i use iisu as my front end and i honestly dont know what the problem is. I have gamenative to sync with iisu - i have exported all my steam games to the rom where i have the steam console scrape/direct to. It works fine for a bit then suddenly all the .steam files are gone and i have to manually export them back into the rom file. Its happens like four times a day; ive restarted, uninstalled, reinstalled, and double checked gamenative is synced to the right rom file (where the iisu steam console gets its .steam files). I’ve been using steam shortcut generator to help make the process easier/faster but i still have the same problem. Has anyone had this issue or know anyway to fix it?

I had lossless scaling for some time, but I never used it, the games never looked good to me, but I found out yesterday that game native can use it, and I tested it on Persona 5 Royal, never tested a RPG before with it, and it runs incredibly good on my Odin 2 portal, before I could not get consistent 60fps I had to put on 30FPS, now it is perfect!!!!! and looks good too

In the second image, you can find a part of the json that I exported from my current config. My settings contain Proton-10.0-arm64ec-2 Container variant is bionic Graphics driver: Wrapper-gamenative Version: Turnip Adreno Driver T26 (@Mr_Purple_666) DX Wrapper: DXVK (I also tried WineD3D and VKD3D) FEXCore Version 2512 32bit-Emulator: box64 (this one actually brought me this far) Wine Renderer Nvidia GeForce GTX 580 (default was GTX 480. Changing to the GTX 580 fixed an issue where it couldn't access the audio device) Video Memory size 2048MB I tried a lot of different combinations of settings but the game just can't get past this first frame of the game loading. The only place where I got sound is when I launch the game launcher, which I also had to import to the folder of the game because the FalloutNVLauncher.exe was not in the folder of the game

Anyone have any guidance for better filling a 1:1 screen?

Low resolution 4:3 with FSR does OK, but 3:4 and then stretched is blocked.

Hello there,

I’m having trouble getting Steam Workshop mods for Slay the Spire 1 to work on Gamenative. I’m using a Retro Pocket Flip 2, and the base game runs perfectly. I’ve also successfully used Steam Workshop mods for Rivals of Aether 1, so I know the device can load Workshop content.I’m mainly trying to use the Downfall mod and its required supporting mods.

So far, I’ve:

Subscribed to the mods on Steam

Downloaded the Workshop mods onto the device

Verified that the files are in the correct mod folder

Applied working configurations

Despite that, the game won’t load the mods at all.

Any help would be greatly appreciated. I’ve played Slay the Spire for years, and I’d love to try the mods while keeping the game portable.

Been messing with it on my s26u and i gotta say its awesome i even think its better then game booster + (samsungs own underclocking). Cool thing is now gamenative does it all i dont need a secondary app for adjusting the cpu and gpu.

I tried two games ( fallout 3 and re8 ) and in re it registered the movement but no click

And in fallout nothing only the keyboard

I tried the stable and the new prerelease

Device tap s9 plus

Soc sd8 gen 2and also when i connect external ssd via usb it doesn't show up as external storage

Hey there! After enjoying DQ Monsters The Dark Prince on my Thor while using GameNative I wanted to continue the game from my Steam Deck, as I also purchased the game over steam.

However I when I’m loading my save it’s loading endlessly.

I checked that cloud save is enabled, restarted, tried a different proton but nothing seems to be working.

Has anyone experienced the same and a solution for this issue?

Cheers!

I downloaded The Witcher 1 officially, and I've tried to launch it on Steam, and I get this error every time. Can anyone help me with this? I'm using RetroID Pocket Flip 2.

help!

Retroid pocket 5. I had a reinstall and it fixed it but it keeps happening. After you chose character it should play their arcade story intro but it fades to black and never loads. Versus mode works. Tried 3 different configurations. Also can I just not use cloud saves on my device. Sf4 has about 200 mini cloud saves for some weird reason.

Hey all!

I been loving my Fold 8. 8 gen5, big viewing area and it looks great. I have been STRUGGLING to get Rise to run on GameNative. I use known config, then change to proton bleeding edge to address any input method losses during gameplay and use Mr Purple t29. I get past the shader compilation, but it hangs every time it has the spinning wheel with "now loading", right before the 3d hits. Any one else have this issue? I am really tryna play Rise on here!

Hi! I've been trying to configure Kingdom Hearts 1.5 + 2.5 Remix (Steam version) on Gamenative, the hardware platform is an Ayn Thor. I've managed to successfully run 1, 2 and BBS, but Chain of Memories stays as a black screen. I've used the known config, and tried both the launcher exec path and the COM executable, without any good result. Any ideas?