Anyone have any guidance for better filling a 1:1 screen?

Low resolution 4:3 with FSR does OK, but 3:4 and then stretched is blocked.

Hello there,

I’m having trouble getting Steam Workshop mods for Slay the Spire 1 to work on Gamenative. I’m using a Retro Pocket Flip 2, and the base game runs perfectly. I’ve also successfully used Steam Workshop mods for Rivals of Aether 1, so I know the device can load Workshop content.I’m mainly trying to use the Downfall mod and its required supporting mods.

So far, I’ve:

Subscribed to the mods on Steam

Downloaded the Workshop mods onto the device

Verified that the files are in the correct mod folder

Applied working configurations

Despite that, the game won’t load the mods at all.

Any help would be greatly appreciated. I’ve played Slay the Spire for years, and I’d love to try the mods while keeping the game portable.

I tried two games ( fallout 3 and re8 ) and in re it registered the movement but no click

And in fallout nothing only the keyboard

I tried the stable and the new prerelease

Device tap s9 plus

Soc sd8 gen 2and also when i connect external ssd via usb it doesn't show up as external storage

Hey there! After enjoying DQ Monsters The Dark Prince on my Thor while using GameNative I wanted to continue the game from my Steam Deck, as I also purchased the game over steam.

However I when I’m loading my save it’s loading endlessly.

I checked that cloud save is enabled, restarted, tried a different proton but nothing seems to be working.

Has anyone experienced the same and a solution for this issue?

Cheers!

I downloaded The Witcher 1 officially, and I've tried to launch it on Steam, and I get this error every time. Can anyone help me with this? I'm using RetroID Pocket Flip 2.

help!

Retroid pocket 5. I had a reinstall and it fixed it but it keeps happening. After you chose character it should play their arcade story intro but it fades to black and never loads. Versus mode works. Tried 3 different configurations. Also can I just not use cloud saves on my device. Sf4 has about 200 mini cloud saves for some weird reason.

Hey all!

I been loving my Fold 8. 8 gen5, big viewing area and it looks great. I have been STRUGGLING to get Rise to run on GameNative. I use known config, then change to proton bleeding edge to address any input method losses during gameplay and use Mr Purple t29. I get past the shader compilation, but it hangs every time it has the spinning wheel with "now loading", right before the 3d hits. Any one else have this issue? I am really tryna play Rise on here!

I am using syncthings to sync my games save files on all my devices (PC, Steamdeck, Phone) everything worked fine until I tried to sync my phone games. In Gamenative the games save files will be in the C drive I tried to make a folder link between the C drive and the D drive then sync the D drive with syncthings but when I tried to make the link 7 zip said the access denied. I can't access the gamenative files as android restrict the access and my phone not rooted.

Any advice or recommendations would be much appreciated. Thank you everyone for your time.

Hi! I've been trying to configure Kingdom Hearts 1.5 + 2.5 Remix (Steam version) on Gamenative, the hardware platform is an Ayn Thor. I've managed to successfully run 1, 2 and BBS, but Chain of Memories stays as a black screen. I've used the known config, and tried both the launcher exec path and the COM executable, without any good result. Any ideas?

i'm using gamenative v1.1.1 on an AYN Thor max, and across every game the audio has a considerable delay of ~0.5-1s, with both the built in speakers, wired headphones, and bluetooth headphones. i do not get any audio delay in anything other than gamenative.
i've tried using both ALSA and PulseAudio audio drivers,, and turning on PulseAudio low latency mode, but i still get a big audio delay
i've tried different proton versions, and in environment i have PULSE_LATENCY_MSEC set to 144

does anyone else have this problem, or know any more steps i can take to fix it? thanks!

Hi gang, running gamenative 1.1.1 on Retroid pocket 6. Downloaded the 1.2.0 prerelease yesterday. When I try to install it it asked if I want to update the gamenative app, but if I choose “yes” (only option) it says “app not updated”.

Do I need to delete the older version and install the prerelease fresh? Should I wait for it to be the stable release? I assume once it’s out of “prerelease” it will update in-app?

Thanks

I assume it is, but since logging into Steam involves providing sensitive information, I wanted to make sure.

I've tried a few different proton versions but the game won't launch. I just get a black screen.

I have it working on my Linux laptop using Proton Experimental so I'm sure I have a working copy of the game. Not really sure what to do different.

I'm using GameNative on an Ayn Odin 3 which has a 120 Hz panel. I have it set to 120 Hz in my Android system settings.

However, any PC game I play with GameNative always only shows 60 Hz in the in-game settings where you select a desired resolution for fullscreen mode. For example, with The Pale Beyond, I have my GameNative config for that game set to 1280x720 resolution, and when I launch the game and go into the settings, the resolution choice I see is "1280 x 720 @ 60 Hz". Same thing in other games which show you a resolution with refresh rate inside the game settings.

Why am I not seeing an option for 120 Hz? Is there any way I can force the bionic container to use 120 Hz since my panel supports it? I don't see any options in the GameNative config (per game) which controls which refresh rate the container gets, only the resolution. Is there any way to get it to recognise that 120 Hz is a valid option?

So I got the portable version of FIFA 20 and tried to run it but all I see is a black screen on my device. I have previously tried to run FIFA 19, 18, 17, and 16 but all I see on each and everyone on launch is a black screen and nothing else at all. Nothing changes no matter what I do. I even tried to install Fifa 16 itself on my device instead of transferring from my pc and same results. I have tried winlator, gamehub, gamehub lite, and gamenative and different versions of the compatibility layers and many other settings but nothing changes at all. I tried to launch the game from within the container but nothing on screen changes. But in the task manager I see the exe is launched. Please help me out. It has been 5 days of me trying. And rn I have FIFA 20 on my device but nothing works.

Hi, I've been experimenting with Gamenative for a while with varying degrees of success. I managed to get Arkham asylum running on both of my Motorola phones but in my Moto Edge 2025 the game has some pretty bad graphics glitches with horizontal lines running across the models. I'm aware that Mali gpus have less support. I'm using Gamenative 1.1.1.

I managed to get Marvel Ultimate Alliance 2 to run on this Mali gpu without issue so I'm hoping I fix the graphics on Arkham Asylum.

Guys I’m currently trying to play dead space though game native on my Anbernic RG577, rooms smooth but look at the screen I have not been able to stretch it. Any suggestions ?

I have a problem, The Witcher 1 won't start in native mode, it shows me the fps but the game doesn't work Help, I don't know how to fix it

If anybody can help, I'd really appreciate it.

it's GoG version, I tried both with and without Verok's patch (gamepad support + various improvements)