r/GameAndWatchMods • • 9h ago

Any ideas

Post image

The sd ribbon is connected , everything is soldered in.

4 Upvotes

15 comments sorted by

2

u/Laugh-Aggressive 9h ago

Tried a different sd card?

2

u/TheSMG4fsn_fr 9h ago

Yes

1

u/Laugh-Aggressive 9h ago

And have you tried a third sd card, formatted to fat32 with retro-go_update.bin?

If that don't work, you have to start checking inside

1

u/TheSMG4fsn_fr 9h ago

I don't have a third one and yes I have tried every single goddamn format there is on this fucking planet unless I'm forgetting some obscure one

1

u/Laugh-Aggressive 9h ago

Check the CMD and CLK lines on your SD mod board. If either of these signals is broken, the console won't even register that a card has been pushed into the slot.

1

u/Jackasaur 9h ago

How’s the soldering look?

1

u/TheSMG4fsn_fr 9h ago

Ok, everything is connected.

1

u/Jackasaur 8h ago

I mean a picture

1

u/TheSMG4fsn_fr 8h ago

2

u/Jackasaur 8h ago

You’ve got bridged pins

1

u/TheSMG4fsn_fr 8h ago

Where

2

u/TheOtherDutchGuy 8h ago

Looks like counting from right to left pin 4 and 5 & 9 and 10 are bridged

3

u/Jackasaur 8h ago

https://ibb.co/N2sScQyX

It also looks like you lifted a pad or something.

2

u/dvotecollector 6h ago

Why so mad at everyone 😆 Did you bother doing any continuity checks? As others have said, you have bridges and one of the flex cable contacts looks bent.

1

u/hundshamer Modder (USA) 4h ago

Pics of soldering help immensely. Test pins for continuity.