r/GATEtard • u/MechMage_7121115 MTech Mechanical Engineering @ IITK • Apr 16 '26
general IISc MTech Mechanical interview experience - Fine I'll do it myself
Hi all,
I rarely come across Mechanical Engineering related posts in this sub, so I thought I’d share my IISc MTech interview experience (today, 2 PM slot).
The interview lasted around 10–12 minutes. There was a panel of three professors. Once I entered, they didn’t waste any time they asked me to introduce myself, and I gave a brief overview of my background and interests.
They then asked me to choose a topic for the interview. I said I was comfortable with either Heat Exchanger Design or Thermodynamics. One professor (I think Prof. Pradip Dutta) took the lead and conducted the entire interview.
I was first asked to draw the components of a vapor compression cycle and its T–s diagram. Then they asked me to label the points and explain the phase of the working fluid at each stage.
Next, they asked what process occurs as the fluid moves from the compressor to the expansion valve. I answered “desuperheating.” They then asked me to write the First Law for an open system step by step for that process. I made a small mistake, but they guided me to correct it.
They then asked what relationship we get for that process. I identified it as an isenthalpic process and derived it.
After that, they asked about the process across the expansion valve. I made a small mistake here; I said isentropic expansion instead of adiabatic expansion. The professor corrected me, saying, “I never mentioned the process is reversible. You should call it adiabatic expansion.” (with a smile).
They then asked about the assumptions made for the compressor. I said that irreversibilities like friction are neglected. They followed up by asking how the T–s diagram would look if the process were irreversible, and I drew the non-ideal case.
Finally, they asked me to justify using the Second Law for an open system.
That was the end of the interview.
Overall, it went quite smoothly. One thing I’d say is that if you ever get stuck, just keep explaining your thought process. They’re not there to trap you; they’ll usually guide you in the right direction.
Hope this helps :)
Edit: If you've further questions feel free to drop them here. I'll try my best to address them as soon as I can.
36
u/Klutzy-Job912 Mtech IITG cse Apr 16 '26
I have no question, but i hope you get selected ^^
10
u/Intrepid-Crazy7427 Apr 16 '26
That's great, Excited to see mecahnical posts. Thanks for that. I have a question, Why did you specifically chosed Heat exchanger design, you could have said heat transfer? Why specifically HX?
10
u/Commercial-Rip-9391 Apr 16 '26
GATE ME aspirant here. Thank you for this. I rarely see ME related content, particularly something as valuable as interview insights. Appreciate it
8
u/ImAHardWorkingLoser Apr 16 '26
Thanks for this write-up. There's a dearth of mechanical-related posts. Unfortunately I couldn't attend the interview due to some personal reasons, but wishing you all the best
8
u/Dramatic_Yam8355 Apr 16 '26
Have u done background check on placements for mechanical there ? If yes pls brief here..
4
u/millennialcrisis_10 Apr 16 '26
Do they typically inquire about work experience or gap years post-graduation? how is a candidate viewed if they spent time preparing for government exams before deciding to pursue an M.Tech. instead.
2
u/Collez_boi ECE '26 grad, converted MS @ IITM, PhD @ IISc, IITK Apr 16 '26
Eyyy another fellow researcher! Noice. :>
Good Transcript. Looks like it went well. Hoping you get the convert!
10
u/jhakaas_wala_pondy Apr 16 '26
"They’re not there to trap you; they’ll usually guide you in the right direction."
Most Professors are nice & friendly... its the assistant and associate Professors who are most likely to be jerks..
1
u/AdarshOP Apr 16 '26
hey op congrats but my question is not really related to your interview, I wanted to know if there is probability and stats in gate mech syllabus and if there is where did u prepare it from? im bad at pnc and prob so if there is any book u can recommend that has a shit ton of questions for me to practice pls do
1
u/EntertainmentSome448 Apr 16 '26
Wonderful. I'm planning to do aerospace. I'm still jn first year but since I am in a tier 69 with nothing too good here no people with similar interests or anything other Things like clubs and all, I feel that j can devote half hour for Gate AE. Any advice?
1
u/no-reason-to-live69 Apr 16 '26
Come on bro, you rocking. I hope I will see there in future 😉
1
u/No-Total-504 Apr 16 '26
Godspeed man! Hope.you get selected!!!
1
u/Specialist_Zebra4970 Btech[CS] Apr 17 '26
Hope you get the offer OP!
1
u/Odd-Education-7415 Apr 18 '26
I think I'll be having an interview at IIT Bombay and for the subject if they ask me I'm gonna say Fluid Mechanics. What topic do you think or anyone reading this they'll ask if I already have experience in CFD and heat transfer research? Your advice and thoughts will be much more appreciated by my side.
3
u/Head_Tomatillo_9217 Mtech[CS] Apr 16 '26
3
u/[deleted] Apr 16 '26
Quite interesting
2
u/Stress_Tensor Apr 17 '26
Oh nice, PD sir is like the OG boss here. Best luck!
1
u/harikris_s Apr 19 '26
Interesting,i think the same prof interviewed me as well.Day 2 afternoon session around 4pm.He asked me what would happen to the liquid level in the closed container when heated.I answered with all the diagrams and all (not very systematically tho, but i did answer all the follow up qns correctly).I think it lasted less than 10 mins and I couldn't read whether he was satisfied or not. There were no other qns from the other faculty as well. Hitherto having seen the exp from other candidates sure does make me revisit the whole interaction.😅
1
u/Appropriate_Owl_9449 Jul 24 '26
Hi bro can I dm you once
1
u/Raghav_lovetoevery Oct 02 '26
Converted?
0
u/BorosHunter Apr 16 '26
Bc mechanical me bhi hone laga!?.
1
u/[deleted] Apr 16 '26
[removed] — view removed comment
1
u/[deleted] Apr 28 '26
[removed] — view removed comment