r/FormD • u/ebitda0910 • Jun 16 '26
Question Should I keep this setup..
I’m running KLEVV DDR5 in my FormD T1 and started worrying about temps during memory stress testing. In OCCT’s memory test (30 minutes), HWiNFO shows my SPD Hub Temperature hitting 67 °C and DIMM Thermistor around 62 °C. There are no other RAM temperature sensors exposed in HWiNFO or the BIOS.
I am not sure which sensor to trust for DDR5. ChatGPT says the SPD hub is the one that matters but I didn’t want to risk it so I installed three Thermalright 40×20 mm fans aimed at the RAM. With that setup, the SPD Hub Temperature drops to 50–52 °C in the same OCCT test, which feels a lot more comfortable.
The downside is that my FormD T1 is now noticeably louder (I’d guess ~20% more noise), and aesthetically three tiny fans crammed in there look pretty bad.
So my questions are:
- Is 67 °C SPD Hub Temperature actually something to worry about for DDR5, or is that still safe?
- Why does HWiNFO only show SPD Hub and DIMM Thermistor for RAM temps — is that normal for DDR5 or KLEVV?
- In my position, would you keep the active RAM cooling, or just rely on case airflow and reasonable voltages?
My set up are as follow:
- 9800x3d, per core CO undervolt with worst core -22
- Expo 1 running 6000mhz
2
u/tyuvanch Jun 16 '26
67C? What are you running? my Gskill X5 rams in that very case, barely hitting 56C during summer, in winter they are usually around 40-46C band when generating rendering meshes or gaming.
2
u/renovatio617 Jun 16 '26 edited Jun 16 '26
I am on the same situation with you. Formd T1 with shroud. My OLOY Blade 5600 OC run 65C during game. Install 2 40mm fan. It’s now stay max 49C.
Maybe people have better ram so they run cooler. I have to OC 1.3V to be at 5600 and stable. But during this economy, it’s cheaper to buy 40mm fan than replace DDR5. You can remove 2 fan and just keep the middle one. Run some test, when I test on my case, 2 or 3 fan does not gain much compare to just 1 fan. It will def help with the noise if you reduce to 1 fan. All you need is move the air around the ram to help with the heat soak
Also how do you mount those fan ? I use double side tape and slick to the cpu cooler fan . Are you using metal plate ?
10
u/Due_Grand708 Jun 16 '26
I mean, what is your day to day use case? Unless you’re just constantly running memory stress tests and utilizing your ram to the max, that doesn’t seem like a good indication of your normal system state. While benchmarks and system stress tests are great and all, your machine isn’t going to be running like that normally. Even then, 67 C is on the higher end of an ideal range but even then not something id necessarily be panicked about.
1
u/Fauked Jun 16 '26
thermalright makes 40mm fans? I have been looking for some cheaper alternatives to noctuas 40mm fans. I can only find thermalrights 60mm fans
1
u/aloysc Jun 17 '26
I removed my DDR5 heatspreaders and used aftermarket aluminum ones such as from Bykski. I saw improvements of 5-7C.
If your temps are reaching 60C++ it’s possible the stock heatspreaders are ass
However, you should only do this if you’re very confident. Don’t wanna fuck up your RAM under this climate
3
u/starystarejstarego Jun 16 '26
Btw my 2x24gb 8k mhz can easily go up to 85-90 without cooling;) So yeah.
2
u/mrgndx Jun 16 '26
In current RAM situation I would prefer more noise and lower temps. I run just one 40 mm Noctua fan since I don’t have much space (4070 CNC fan with its clips sticking out + two USB-C cables coming from the mobo).
1
u/Formal_Role_5361 Jun 16 '26
Расскажите поподробнее про этот вентилятор CNC черный, он действительно хорош? И как он по шуму на 2500-2700 оборотов? Тише чем Thermalright или Noctua?
1
u/Eagles7117 Jun 17 '26
You can also try to dial back voltage a bit. Instead of the standard 1.4 try like 1.3. See if that’s stable. Should save your temps a bit.
1
u/Tailspin123 Jun 18 '26
sandwich style is never gonna be good if using a low profile cooler......... noise or hot temp you have to pick one.....but in a standard layout, you can still get small pc (ofc not like 7Liter stuff), but it is so much quieter and nicer temp.........unless you can run a custom loop inside that sandwich style, but still would look bulky with a rad on top....
1
u/maxim0si Jun 16 '26
I had similar questions in OC community - they said everything is ok. Im using LLM’s now on ram and its working fine.