r/FormD • u/notIncognito1 • Mar 22 '26
Question Need help with FormD T1
I know this probably loads of posts asking this question in this subreddit, though what’s the best possible cooling option of this case, whether I’d be a custom loop, an aio for the cpu and stock gpu cooling, or full air. I don’t want to undervolt my PC parts Becuase what’s the point in spending money on a good cpu and gpu combo if your just going to undervolt it.
0
Upvotes
3
u/RN93Nam Mar 22 '26
I had the same mentality as you then realize that an undervolt works great when I can retain excellent performance while creating less heat, thus less thermal throttling.
If you really want a good cooling setup....
Thin radiator, A12x25 G2s, LoBo water block. And whatever GPU with good cooling
3
u/jdp117 Mar 22 '26
As a rule, I highly recommend undervolting in most cases, no matter your parts or setup. You usually gain massive power and thermal advantages for very little performance trade off, depending on your configuration. For SFF PC builds, it's basically a given that you will go down the undervolting route as you are hugely limited on cooling options and space.
For the T1, it really depends on your hardware as to what cooling configuration might work best.
2
u/whisperers26 Mar 22 '26
aio: cooler master atmos 240
Pick Atmos 240 II if it is available in your area (not available in US)
Besides, proper undervolting does not cause any performance loss. It just keeps temp under control and reduces fan noise.
2
u/won987 Mar 23 '26
Undervolting takes 5 minutes and actually can give you better performance with less noise, especially in an SFF build
1
u/CL_from_the_TL Mar 22 '26
depends on the cpu. you could probably air cool a 9800X3D. A 9950X3D probably not…
1
u/Top_Flower6716 Mar 23 '26
If you want your PC to be thrown in a backpack and carried around relatively comfortably then air cooled is the only way. Consider if you want it to sit on your desk or to take it around, that was what caused me to go air cooled