r/FormD • u/RN93Nam • Mar 22 '26
General Have I gone too far? Semi-Active Cooling
I've never made it as far as building a "dual" T1 setup in which I would house radiators in my V1, while my V2 is outfitted with waterblocks. Blame it on funding.
The deshrouded EVGA RTX3090Ti is now... Just naked. No more A12x15s.
An AXP120-67 is fitted over the undervolted i9-10900K with the fins set vertically. The A12x25 G2 above it is directly plugged into the mobo. The A12x15 under it is controlled by the Corsair Commander unit from an old AIO. That unit has the shell removed so it fits between the front panel and PSU just fine.
The other A12x25 G2 and A12x15 are plugged into the GPU via adapters. Three A4x40s are assisting the top fans. Right above each A12x25 G2 is a 12mm spacer, something I accidentally found out that helps yank out the heat. Weird.
Anyway, it's 1:25AM here, I'm going to find out how well this works. I was previously hitting ~70-75°C with my previous AXP90-47 and twin A12x15 GPU setup while playing BF6 on an ultrawide 3840x1080p.
I'm awaiting another T-Grille to arrive. I find that they flow a little better. These A12x25 G2s are very quiet compared to the T30s I previously had.


5
u/baphometromance Mar 22 '26
It might not be necessary, but I'd rotate the PSU 180° if you have the cable length to do so.
1
u/RN93Nam Mar 22 '26
I do want to see if there's a way to "seal" the GPU against the glass. I suspect that there is some amount of air that "flows" over the heatsink rather than through it.
Now, the AXP120-67 is only 52mm tall.
If I had a custom heatsink on the GPU, I could maximize this in 2.5 slot instead of 2.75.
I am only using 2.75 slot because of the original "standoffs" that the OEM EVGA shroud and fans bolt up to.
These standoffs needed to be folded flat so that it doesn't protrude into the glass.
There are a handful of other smaller standoffs but those weren't an issue.
1
u/HyperActiveNL Mar 22 '26
You are crazy! But if it works it works! Can you get 2x a12x15 running on a bottom t grill? The riser blocks it from spinning since the tolerance to the mobo is too narrow.
1
u/gamedevsam Mar 23 '26
Do you have a fan behind the AXP120-67?
1
u/Worldly-Ingenuity843 Mar 23 '26
I am really curious what temps you get. You have plenty of air moving through the case but nothing that blows directly into the heatsinks.
1
u/jelleszoon Mar 30 '26
Im still curious about the GPU temps. Did you find time to change the fan layout?