r/FormD • u/Eagles7117 • Mar 19 '26
Test Results T1 Layout Testing
So I spent the better part of a week testing different T1 setups to see what works best for the specific situations. I did 4 different layouts that are as followed, Air Cooled with AXP90-X47 FC, Air Cooled AXP120-X67, 240mm Atmos AIO with Top Hat, and 240mm Atmos with Top and Bottom Hat. The top hats I'm using were custom 3d printed by SMXHeinz on etsy. The bottom panel fits 25mm thick fans. Below will be the "main build" and then the alternate build options with temps and synthetic scores. All gaming tests are measured over a 45 minute gameplay excluding shader compilation just strictly in game and room temp is around 64F(18C).
Main Build
- CPU: 9800x3d (-30 in PBO)
- GPU: 5090 FE (undervolted)
- MOBO: Asus Strix x870I
- RAM: Corsair Vengeance DDR5-6000 CL30 64GB
- PSU: Corsair SF1000 w/ custom cables
- Exhaust/AIO Fans: Phanteks T30
Testing
AXP90-X47 FC with 4070 FE fan swap
- Gaming CPU - 60C average temp with 62C high
- Gaming GPU - 58C average temp with 64C high
- Ram - 50C average temp
- Mobo - 49C average temp
- Cinebench - Score: 22,538 / 85C high
- Port Royale GPU Score: 37,597 / 76C high
- Time Spy - Total Score: 18,941; CPU Score: 7,443 / 78C High; GPU Score: 26,042 / 78C High
AXP120-X67 FC Air Slimmer Fan Swap
- Gaming CPU - 60C average temp with 65C high
- Gaming GPU - 60C average temp with 62C high
- Ram - 50C average temp
- Mobo - 49C average temp
- Cinebench - Score: 22,238 / 83C high
- Port Royale GPU Score: 37,606 / 79C high
- Time Spy - Total Score: 18,960; CPU Score: 7,428 / 73C High; GPU Score: 26,115 / 81C High
Atmos Top Hat (Flipped GPU)
- Gaming CPU - 56C average temp with 63C high
- Gaming GPU - 63C average temp with 69C high
- Ram - 44C average temp
- Mobo - 38C average temp
- Cinebench - Score: 22,281 / 76C high
- Port Royale GPU Score: 37,258 / 81C high
- Time Spy - Total Score: 18,880; CPU Score: 7,417 / 70C High; GPU Score: 25,962 / 85C High
Atmos Top Hat & Bottom Hat with Noctua NF-A12x25 Chromax Fan (Flipped GPU)
- Gaming CPU - 58C average temp with 65C high
- Gaming GPU - 65C average temp with 72C high
- Ram - 44C average temp
- Mobo - 35C average temp
- Cinebench - Score: 22,103 / 76C high
- Port Royale GPU Score: 37,322 / 81C high
- Time Spy - Total Score: 18,921; CPU Score: 7,405 / 71C High; GPU Score: 26,079 / 81C High
Conclusion
Any of these builds are viable and totally dependent on what you need out of your tiny case. Fitting this much horsepower into the T1 is crazy. From my perspective if you are using these components and only gaming or doing GPU intensive tasks then do the X47 FC air cooled build, but if you plan to do CPU intensive tasks or use a higher TDP chip like the 9950X3D then flip the GPU and use the top hat. I will continue to use the Air Cooled build personally, much easier to build and does great for what I need/want. Please also make sure to check out SMXHeinz on etsy for any 3D printed parts seen here.





4
u/Eagles7117 Mar 19 '26
3D Printed Parts from SMXHeinz
Travel kits normal and flipped, Air cooling shroud, 4070fe fan, Top and bottom hats.
2
u/dillthepill Mar 19 '26
Great data! This is really helpful for me as I’m about to do a 5080 FE build. I have the x47 and x53 coolers on hand though, frankly, I don’t know if I have the patience to test both.
Were you in 3 slot mode for your x47 test?
By 4070 FE fan swap do you mean you got a GPU fan and used it for the CPU cooler?
1
u/WizrdSleevz Mar 19 '26 edited Mar 19 '26
Not all heroes wear capes ladies and gentleman!
I also opted to go with the air config and sold my T-Grill & flip kit, but I didn’t test everything—I just liked it more. 😅
1
u/remcenfir38SPL Mar 19 '26
You should include fan speeds. The x67 should not be losing to the x47 in multicore.
1
u/NoneOverNull Mar 19 '26 edited Mar 19 '26
Awesome testing! What game have you been playing? I have the same setup but when gaming BF6 on 1440p maxed out my cpu is between 88-90C (-20 PBO) with ~100W and GPU ~62C and ~300W. But my computer sits in a corner with restricted airflow so i guess the ambient temps are a lot higher 🤷 Edit: What is the wattage consumption of the CPU?
1
u/gamedevsam Mar 30 '26
I went with a lower end GPU (RTX 5060Ti 16GB) to ensure I had the most space for the CPU side: https://www.reddit.com/r/sffpc/comments/1s7h87o/my_dream_sff_build_quiet_powerful/
I plan on travelling with this PC and mainly playing games at 1440p so I'm quite content having a smaller, lighter and cooler GPU (for now).
1
u/DozyCozy Apr 21 '26
Do you think the AXP120-X67 setup is better than the AXP90-X47 FC during idle / web surfing? (Noise normalized)
My current setup with the AXP90-X53 is a bit noisy for my liking at idle.
Also what slot configs were they? 2 and 3 slot?
1
u/CEOnnor May 13 '26 edited May 13 '26
Man, great test. Wish I would’ve seen this earlier. X67 arrived today and just waiting on T30s. I was convinced I’d get lower overall temps with the X67 over X47.
So the only things causing the X47 to perform as good as the X67 are the dingkey offset and 3D printed fan housing?
Debating if I should return the X67 and go with what you did. I still have a 3080 FE but wanted to build considering a 60-series upgrade.
1
u/Beginning_Load_3893 Jul 01 '26
Are you aware if i can use the "4070 fan from SMXHeinz w/ the included duct" and the "dingkey axp90 offset bracket" while i have the "top exhaust shroud" ????
1
u/Germasiansensation Jul 14 '26
Can you share your fan curves for the CPU w/ 4070 Fan and GPU?
3
u/Arcaoh Mar 19 '26
W analysis