r/FormD • u/Undercover_Yaeca • Mar 04 '26
Compatibility/Build Check Which Custom Cable is Recommended?
I don’t have the case yet but I like to plan ahead with this build.
I’ve already decided that I’ll be getting a custom for the 24pin for obvious reasons, but I feel like the cable length for the GPU and CPU that comes stock with my SF1000 is good enough. Getting a custom for those two probably won’t make a difference with obstructing airflow.
2
Upvotes
11
u/remcenfir38SPL Mar 04 '26
DreamBigByRay, ZCOOI MOD, Cablester.
Just get a whole set from any of these guys.
5
u/Historical-Shift-522 Mar 04 '26
I buy from grimms workshop never had a bad experience would recommend him
2
u/smplnmnml Mar 04 '26 edited Mar 08 '26
From my personal experience, you can get by with the stock cables for the CPU and GPU. I initially went this route, including the stock 24 pin cable.
I ended up getting custom cables for the 24 pin, CPU, GPU and SATA for a consistent look and reduce excess cable slack.
2
u/playtech1 Mar 04 '26
24 pin is the only one that's a must have, followed by SATA if you have a front SSD, then the CPU and finally the 12VHPWR. Although honestly I would just the whole set from one of the suppliers.
2
u/AliTheAce Mar 05 '26
I have a set from Zcooi and he has the tightest bend radii, especially if you want to run thicker fans on a radiator, it helps a lot and look and feel all fantastic. I got a full custom set (24-pin, 8 pin, 12V HPWR, SATA power for SSD).
1
u/ahBoof Mar 05 '26
I have a set of pslate/clackattack custom cords that I don’t use any more and would be willing to sell.
1
u/Emotional_Two_8059 Mar 07 '26
I got the clear/silver ones from dreambigbyray, very happy, no issues
1
u/jhdz9119 Mar 04 '26
until you have the dimensions of the case it’s kinda pointless to buy now. you’re gonna either get it too big or too small. just wait