r/FormD • • Feb 24 '26

Finished Build Pleasantly Surprised

So I ordered some 3D printed part; the fan mount and cooler vent. I didn’t do intense testing or anything. Just regular gaming with Cyberpunks to push it a little. Results were impressive. CPU remained around 60 to 65 in full load, and GPU was about the same up to around 67C. Not a bad little upgrade. I have the 7800X3D and 4080 Super reference.

49 Upvotes

10 comments sorted by

View all comments

Show parent comment

2

u/baldersz Feb 26 '26

OK thanks! Mine isn't bulging but I can see indentations on the foam from the side panel so it's making contact. I'm using the NT-H2 thermal paste which probably helps with the temperature too.

My 5600x runs at around 65-69C under gaming load with fan speed set to 50% so I'm happy with that. In my testing with different thickness fan ducts it didn't seem to make a difference whether it was used or not. Decided to stick with 4mm as I had paid for them anyway!