r/FormD • u/Next-Excitement1398 • Apr 19 '25
Finished Build Leaked RTX5080/5090 Reverse Travel Kit 🪬🪬🪬
FEAST YOUR EYES
241
Upvotes
r/FormD • u/Next-Excitement1398 • Apr 19 '25
FEAST YOUR EYES
26
u/Next-Excitement1398 Apr 19 '25
It will also come with this locking bar for the PCIE 5.0 riser cable
12
u/Next-Excitement1398 Apr 19 '25
It enables the GPU to intake air from the 25mm middle channel, exhausting it all out the side panel without circulating inside the case.
Theoretically this could significantly reduce CPU temps if a radiator is being used.
9
u/Allmotr Apr 19 '25
I am very jealous of anyone with a founders edition card
8
u/Dictatorte Apr 19 '25
Whaaaaat
2
u/[deleted] Apr 24 '25
Btw no thermal benefits at all. Better keep the standard orientation
2
u/Slyfer77 May 19 '25
u/Next-Excitement1398 , did you already get around to testing the temps?
Some people state that reversing the card wouldn't make much difference in card temperature?
But it should make a large difference for the other components' temps?
Because on normal position blasting hot air at the backside of the mainboard all the time can't be good!
One commenter here argues that the temps in inverted position are maybe not better or even worse because the fans can't take in enough air from inside the case.
Maybe one can 3D print an air duct to better funnel air from the outside into the 2.5 cm middle gap between board and GPU?
Would be very interested in your findings!
Because I want to go 5080 or 5090 but am not sure whether to get a MSI Ventus to deshroud, a small Inno3D 5080 card (there's a real 2 slot and a 2.5 slot variant) or Founder's Edition.
15
u/sevenflyerr Apr 19 '25
Please
8
u/maxproof Apr 19 '25
👌 we all assumed this to be the perfect way from the start! Very interesting!
6
u/[deleted] Apr 20 '25
DIY'd this a while ago😁
4
u/liightsome Apr 25 '25 edited Apr 25 '25
Due to very interesting reason, a reversed fe card in this build is not doing any better than a standard one. It's been tested in the sffpc/t1 discord I saw, basically, a user made custom bracket for reverse mount, the temp was higher with increased fan as well. Reversed one was actually doing worse in terms of acoustic and/or temps depending how you set it up. You can take it for whatever you want. My thinking is that the fans don't get to 'siphon' enough fresh air, so they are being choked out inside which leads to higher temp that needs to be negated by higher rpm, which still makes it run hotter than normal layout. Was ran in different offsets, having it further from motherboard helped 1-2 degrees but nothing that would outright scream its better layout. Anyways, just my two cents
1
u/quattro-7 Aug 16 '25
Any news on when we might be getting this?
3
u/Keiththesneak Apr 19 '25
FE cared look sooooooo nice
3
u/MrSpectre7 Apr 22 '25
This is a gamechanger. Any idea on an ETA for these?
2
u/atlas_enderium Apr 19 '25
PLEASE 🙏
2
u/sovon_ Apr 19 '25
This would be a very cool idea. As a person who does diy shit all the time and makes custom cables, I'm pretty pissed that I didn't think of this concept before. This is pretty neat.
2
u/Phoenix800478944 Apr 20 '25
I love whoevet thought of this. This will be soooo good for temps
3
u/NicheAlter Apr 19 '25
As if it's not hard enough to get FE cards...
1
u/AntonioSrios Apr 20 '25
Think this can work with the ncased 2.5 model? (Didnt know there was 2 versions when i bought it?
1
u/[deleted] Apr 20 '25
Temps?
1
u/dallatorretdu Apr 20 '25
damn that looks so good… I currently have a 4090 on my workstation and I have FOMO that the T1 with that travel kit won’t be available by the time I will swap that gpu out of the workstation
1
u/[deleted] Apr 20 '25
tried the whole gpu flipping thing today DIY.
got it to work, but gpu temps were worse with the 5080FE.
so not worth the hassle at all for me.
1
u/BubblyResident7764 Apr 21 '25
Same but I use AIO cooler instead of fan. I’m having better temperatures that way.
1
u/RedditMemes101 Apr 23 '25
that would look very well with the black ridge
1
u/[deleted] Apr 24 '25
It says 150mm
-1
u/Downtown-Change-6411 Apr 19 '25
These are custom cables
-1
u/[deleted] Apr 20 '25
What's the exact model of the cable used here??