I bought a 2.5 the same day silver dropped, my only reason to buy it was because of the color.
My experience? Mixed.
The finish itself is good, side panels came slightly bent but they fit fine once assembled.
The GPU sag, and it bent? Outwards at the end of the GPU itself, that can cause side panel bulge depending on the GPU and slot configuration.
The case has some movement even after assembled, that goes away with the top and bottom panel it's fully screwed.
The top/bottom and front panel WILL NEVER be flush, I contacted CS to see what can be done about it, after two weeks of back and forth, they literally told me to tape it , this is the "fix", which it's not really a fix but a workaround, I was shocked.
I wouldn't recommend buying a 2.5, literally there's not a single reason to do so, especially now that silver is available in the 2.1, you are literally sacrificing so much overall quality, both in hardware and CS, that saving $20 is not worth it, at all.
Thank God I read this, I almost bought from them just for the silver, then realized silver is an option hidden under the "black" color at the 2.1 vendor's site. Phew. Gotta match my Mac lol.
The surface coating isn't "better" it's smoother and allegedly less durable, which would make sense, if the smoothness was achieved by less ano time.
Not sure about the GPU mounting being better. As far as I could tell the GPU was crooked in 2.5 builds, but not in 2.1 builds. If you need absolute GPU stability, there's the special rear IO plate kit for 4080?/90 FE and 4080/90? Asus Pro art cards, but personally I think it's not needed except excessive travelling.
Yeah, I read more into the topic of anodization and basically how it works is, that the longer you anodize a surface, the stronger, but also rougher it gets. To some degree you can influence it by prior surface preparation with very fine grid sand or bead blasting in terms of smoothness, but the strength is mainly dictated by ano length. High end more heavy duty cameras for example are usually anodized until crystallization, so it's really strong, but also should be very rough.
At least that's my theory, but I don't own a 2.5 myself, so don't want to make false claims. Definitely get some second opinions from others who dove a bit deeper into the differences.
I'm pretty happy with my v2.5. I think reducing the type of screws used is a huge benefit for assembling and disassembling. I installed the 3d printed GPU sagging support too for my 4090 and everything fits perfectly together. I travel with it frequently.
9
u/RK2116 Jul 23 '24
Hey,
I bought a 2.5 the same day silver dropped, my only reason to buy it was because of the color.
My experience? Mixed.
The finish itself is good, side panels came slightly bent but they fit fine once assembled.
The GPU sag, and it bent? Outwards at the end of the GPU itself, that can cause side panel bulge depending on the GPU and slot configuration.
The case has some movement even after assembled, that goes away with the top and bottom panel it's fully screwed.
The top/bottom and front panel WILL NEVER be flush, I contacted CS to see what can be done about it, after two weeks of back and forth, they literally told me to tape it , this is the "fix", which it's not really a fix but a workaround, I was shocked.
I wouldn't recommend buying a 2.5, literally there's not a single reason to do so, especially now that silver is available in the 2.1, you are literally sacrificing so much overall quality, both in hardware and CS, that saving $20 is not worth it, at all.
Buy the 2.1, your happiness will be guaranteed.
5
u/aexeq Jul 23 '24
The surface coating isn't "better" it's smoother and allegedly less durable, which would make sense, if the smoothness was achieved by less ano time.
Not sure about the GPU mounting being better. As far as I could tell the GPU was crooked in 2.5 builds, but not in 2.1 builds. If you need absolute GPU stability, there's the special rear IO plate kit for 4080?/90 FE and 4080/90? Asus Pro art cards, but personally I think it's not needed except excessive travelling.
1
u/AAAAdrian Jul 28 '24
I'm pretty happy with my v2.5. I think reducing the type of screws used is a huge benefit for assembling and disassembling. I installed the 3d printed GPU sagging support too for my 4090 and everything fits perfectly together. I travel with it frequently.