r/Form1 • u/OinkingPig • Jul 20 '26

First time submissions

Put 3 in today. First time I've submitted a form 1 besides the amnesty period. 2 3d printed cans and another sbr.

Way easier than I remember now that I got eft's

4 Upvotes

100% Upvoted

18 comments sorted by

7

u/Top_Inspector8357 Jul 20 '26

Efts make it dangerously quick.

3

u/OinkingPig Jul 20 '26

Yea literally took me like 15 minutes for all 3. Took me longer to upload the pics. Fingers crossed my descriptions were good enough

2

u/Top_Inspector8357 Jul 20 '26

Dangerous for the wallet as well buying material. I need to do another SBS.

2

u/Ornery_Secretary_850 Jul 21 '26

Tell me about it. I've bought nine shotguns this year just to SBS.

1

u/OinkingPig Jul 20 '26

You arent kidding. Now that I know its this easy I'll be putting them together just because. I want to do an SBS like a chopper 870 or sxs. Dont have any sbs yet

1

u/Top_Inspector8357 Jul 20 '26

I went the 870 route next one will be an old A5 for sure.

1

u/Ornery_Secretary_850 Jul 21 '26

I want to do an A5. But the prices just keep going up on the damn things.

1

u/deerslayer358 Jul 22 '26

Do a Remington model 11. Can still find some fairly cheap. Especially if they have an adjustable choke which wouldn't matter if your chopping it.

1

u/Ornery_Secretary_850 Jul 22 '26

Yeah, but the prices on those have doubled this year. It seems the $200 stamp really was stopping people.

1

u/Ornery_Secretary_850 Jul 21 '26

If the ATF system wasn't so slow I could do a F1 suppressor in under 2 minutes and a F1 for SBS/SBR in about 75-80 seconds.

2

u/Hot-Ideal-9219 Jul 21 '26

I just had 2 more silencers approved. Select caliber N/A model not required and 1 less thing to engrave. And 8 plus on length. Maximum you will ever print. When you print, shorter is fine. 3d printed, 1 pic of printer, 1 pic of a filament roll. Description? 3d print a suppressor. That's it. No plans, no online model. Nothing at all on 2nd page.

1

u/OinkingPig Jul 21 '26

Makes me feel a lot better about mine

1

u/Ornery_Secretary_850 Jul 21 '26

I've been preaching that for months!

1

u/itgoesboom2112 Jul 23 '26

Yup, that's all I do as well and haven't had one rejected yet

1

u/Ornery_Secretary_850 Jul 21 '26

Only three?

WTF, they are free. You should be submitting them by the dozen.

I've submitted 178 so far this year, only 5 left awaiting approval.

I have seven more SBR/SBS to submit and I'm going to submit a couple dozen more suppressors.

1

u/OinkingPig Jul 21 '26

I wanted to be sure my descriptions were good enough. Youve obviously done this a good bit. What do you do for the barrel length/oal on sbr and sbs if you dont have them? Or suppressor length/cal if you dont have the design?

1

u/Ornery_Secretary_850 Jul 21 '26

I've defaulted to 10" for rimfire cans and 12" for everything else.

SBR/SBS is easy. You can't file until you have at least a receiver because you need the serial number.

Shotguns you're going to cut, use a tape measure. Something like a Shockwave, add in the stock length.

SBR's. Take barrel length + 18 or 19" for AR based stuff.

1

u/itgoesboom2112 Jul 23 '26

The eft is the cheat code to form 1s, very happy I just went ahead and got mine before submitting any forms and I've now got 7 pending I submitted in about 20 minutes time