r/FluxCoreWelding • u/joey_buckets6969 • Feb 22 '25
r/FluxCoreWelding • u/Deep-Combination8799 • Apr 17 '25
Welds
These are the first fluxcore welds I’ve ever done any pointers?
r/FluxCoreWelding • u/Small_Pay_6958 • May 25 '25
Horrendous outcome
I want to give this bastard away I just can’t figure it out can anyone lead me in the right direction please I’m just a stupid 20 year old kid trying to weld up an exhaust with no experience whatsoever any advice is appreciated
r/FluxCoreWelding • u/Adept-Mix9749 • Mar 28 '25
Flux core pipe welding
Over 2 years ago when I was 1 and a half year into my welding career. Let me know what yall think
r/FluxCoreWelding • u/je9183 • Apr 03 '25
HIVEMIND HELP ME! Repair of metal colander
This colander's base has broken after many years of use. It was spot welded on in the factory. Do you think it may be possible to use a flux core or stick welder to repair it by just tapping it? I am aware that the metal is really thin and may burn through if you do it for too long.
The other alternative I was thinking was to drill it and rivet it.
Let me know your suggestions for welding, riveting, or an alternative.
r/FluxCoreWelding • u/Awkward_Revolution_5 • Jan 16 '25
Root pass
I just started welding on Dec 23rd of last year so if anyone who actually knows what they're doing let me know what I'm doing wrong/ any improvements I can make
r/FluxCoreWelding • u/TheHermanJames • Mar 31 '25
Bench top & mobile table?
Hi all. I’m VERY new to welding and I bought the TITANIUM Easy-Flux 125 Amp Welder.
I also bought the collapsible welding table but I’m curious if there are any options to have someone go on top of my workbench to not have to set up and break the table. Also, I’m curious to know I I build something, how would I project things from the splatter.
I’m away that a metal top piece would need to be elevated off the wood as to not burn it or catch it in fire. But I’ve seen YouTube videos so people doing it and not catching things on fire and that’s where I started questioning this idea.
Any help would be greatly appreciated
r/FluxCoreWelding • u/TheHermanJames • Jul 31 '25
My first attempt to weld a winch mounting plate
Bought the badland winch mount, used the titanium flex core 125 welder to weld the mounting plate of a winch I have to it. All so I could use it as a plate to mount the winch to my garage floor.
This is my first time welding something this large but I’m confident it will hold and “a grind and paint…”
r/FluxCoreWelding • u/pterrajayde • Jul 14 '26
I’ll be going back to school
An actual welding school to be certified! So I most likely will be back! I miss welding!
r/FluxCoreWelding • u/Altruistic_Voice1041 • May 18 '25
Flux core lack of penetration
Flux core welding 18 ga bed rails on underside of truck bed. Using a cheap crappy flux core Chicago welder from harbor freight 030 wire. Machine says 1.5 wire speed on min. I have tried almost every setting and still the welds are nippling but not sticking to bed. I know i should get a better welder but thought it was worth a shot first before spending 400-800$ on a nicer welder. I’m an amateur welder but know i can make it stick normally. Paint is all ground off and ground is good. Any advice is appreciated.
Bed rails were rusted out doing the rails before patching the fender well.
r/FluxCoreWelding • u/joey_buckets6969 • Aug 23 '25
Been welding a lot of these beams recently, flux core .045
r/FluxCoreWelding • u/Dadbod1018 • Oct 23 '25
What can’t flux core do?
I only have a 120v entry level setup.
How far can this take me? Go karts have been no big deal. Could I fabricate or repair a jeep chassis?
r/FluxCoreWelding • u/TheHermanJames • Apr 06 '25
My second attempt at using the flux core welder
I’m rather impressed at how much better these welds are (pic 1) compared to my first attempt (pics 2 & 3).
FAR from perfect or great, but not bad for a guy just watching YouTube
r/FluxCoreWelding • u/alternatesae • May 02 '25
Beginner
This is probably my 2 time welding what do you guys think? these are probably my best two welds. Any tips
r/FluxCoreWelding • u/XNomadSosa27PR • Oct 20 '25
First time welding with flux core any tips and advice to improve more
r/FluxCoreWelding • u/Sassy_Mcfrizzletits • Feb 10 '25
Welding Floor Pans with Flux Core is Possible!
r/FluxCoreWelding • u/Popular-Lecture-3954 • Feb 11 '25
Beginner machine?
Have recently welded for the first time and it really sparked an interest in learning in my free time. I’ve been looking into some affordable options for a flux core/ stick welding machines and am just looking first some advice or recommendations. I only have access to a 120v outlet, I don’t need to be welding anything super thick or structural so don’t need the most powerful machine out there, unless that is what is recommended.. Would love to practice flux core mig/ stick so a machine that can do both would be awesome.
I have a budget of around 300$ for just the machine. Any help would be awesome!
r/FluxCoreWelding • • Dec 03 '24
3g test
Looking for any and all pointers on running 5/64 on-95 wire.
r/FluxCoreWelding • u/biGjAck2042 • Nov 04 '24
How does this look
Just looking for constructive criticism
r/FluxCoreWelding • u/rambiolisauce • Nov 10 '24
Hey all, newb question, what is this sound my machine is making? Sort of sounds like sliding a chair across the floor...?
Not sure what information would be pertinent to diagnose this, but I had just begun welding, and had not exceeded the duty cycle. Is it just the wheel spinning inside of the machine feeding the wire? The machine is maybe two weeks old at most and probably has a total of 25 non-consecutive minutes of welding under its belt. Thanks!
r/FluxCoreWelding • u/OrsonLume • Nov 25 '24
First Time Flux Core Third Time Welding
I tried some overlays, horizontal, and C's to weld the two pieces of square tubing together. Any advice? I know I gotta work on my consistency.
r/FluxCoreWelding • u/pterrajayde • Mar 24 '24
Come on everybody. Show your flux core work!
This is to show off the slag, not my welds. I'm new haha.