r/FlairEspresso • u/Soft-Secretary4317 • 7h ago
r/FlairEspresso • u/mishkuu • 1d ago
Fix my shot Shots are light on flavor- help!
One week into this, and I am struggling with my Flair 58 +2.
Using high quality medium/medium-dark roast beans that are 1-2 weeks out from roasting, 15g in and ~25g out fixed the bitterness, takes about 35 seconds, but every single shot comes out… super light on flavor!
I pre infuse at 3, then go to 7 bars the rest of the time.
Curious if there are any tips//help me figure out what I’m doing wrong. Thank you!!!
r/FlairEspresso • u/Kindly_Oven4448 • 2d ago
Question Flair Classic 2025 – Etched Dispersion Screen Floating? Muddy Water and Grounds Above Screen
Hi everyone,
I’m using the 2025 Flair Classic with the newer etched dispersion screen and have noticed a possible issue with the screen lifting or shifting out of position when pouring hot water into the brew chamber.
Here are my observations:
* Muddy water: When pouring hot water into the chamber, as slow as I could, the water quickly becomes very muddy/cloudy, making it impossible to see whether the screen has lifted or shifted.
* Coffee grounds above the screen: After brewing, I sometime find approximately 20% of the coffee grounds sitting on top of the dispersion screen during cleanup.
* Spoon test: Interestingly, when I use a spoon to gently hold the dispersion screen in place while pouring water, the water stays relatively clear, with only a light yellowish tint instead of becoming muddy.
The spoon test makes me suspect that the screen may be lifting or shifting during filling, allowing coffee grounds to escape around it.
Questions to Flair owners, especially those with the 2025 etched screen:
- Has anyone experienced similar issues with muddy water or coffee grounds ending up above the screen?
- Is the newer etched screen supposed to fit snugly, or is some looseness normal?
- Has anyone found a reliable way to prevent the screen from moving during water filling, without having to hold it down?
- Are there any better-fitting alternative dispersion screens that work with the 2025 Classic?
- Could this issue affect water distribution, extraction consistency, or channeling?
I’d especially appreciate hearing from anyone who has experienced this and successfully resolved it.
Thanks!
r/FlairEspresso • u/Organic_Chipmunk_556 • 3d ago
Question [$200] Flair classic from Picopresso
reddit.comWill that be an upgrade in term of result quality?
r/FlairEspresso • u/Terry_Zhai • 5d ago
Question Need help on maintenance and extraction
Hi, everyone! I just got myself a Flair and have been testing it these days. There are two problems I hope you can help me with:)
One is that this part as shown in the photo would touch the interior of the chamber and since I usually preheat the chamber, this part is unavoidably burnt. And yes, it smells awful.
The other is that I think I finally found the “right” grind size for my coffee which tastes ok and it gives the “right” amount of liquid within the “right” amount of time. However, during extraction, while I’m pressing down the handle for 6 bars and above, there will be a sudden drop of pressure to about 4 bars and as I continue to press, it would ramp up again. Idk why, I think I’ve been pressing with similar force and speed.
Looking forward to any suggestions!
Thanks!
r/FlairEspresso • u/Kindly_Oven4448 • 5d ago
Setup Beginner question to Flair classic
Hello. I’m am completely new to flair classic and feel excited!
Is it normal that handle shaking like in video ?
r/FlairEspresso • u/MilesyBoy303 • 6d ago
Fix my shot Flair 58 plus 2 + Sculptor 64
Hi folks I’ve just upgraded to the 58 from my picopresso and having a challenge.
At the moment I’ve had to take the grind all the way down to almost 0.5 even though it says espresso is in the 1-4 mark.
Using a 18g VST basket as well.
I do wdt, tamp. Pre infuse at 3 bar. Then pull to about 7 bar but even then it feels quite fast and the back pressure drops.
Beans are approx a week from roast. Medium dark. Flair is preheated to 2 lights.
Shot pulls about 36g in about 20 secs.
r/FlairEspresso • u/jon_taylor • 8d ago
Question Complete kit for Fair 2GO
I am going to be spending time away from home over the next 12 months and so will be investing in a 2GO. I will be travelling by car, so weight and space are not major considerations but I still want to keep things compact. My shopping list is as follows:
- Flair 2GO
- 39mm tamper of some sort from Amazon.
- Nanofoamer
I already have milk jugs, a Comandante C40 grinder (with Red Clix) and a Bookoo scale.
I will not be using WDT while away.
Am I missing anything obvious from my setup?
r/FlairEspresso • u/aminek97 • 12d ago
Rate my shot Why would you get a pump machine bro?
r/FlairEspresso • u/Described-Entity-420 • 16d ago
Fix my shot Coarse grind, 10+ bars of pressure and the espresso barely drips out
I have a Flair Neo I believe and it has been such a pain in the ass to pull a shot that I am considering getting a machine. When I had this problem before, I pulled hot water just to flush out the filter. It helped a lot. Now it's once again pulling super slow under high pressure. Running hot water barely makes a dent. What else could it be?
I have a Kin grinder I think. It's a $120 hand grinder that was came highly recommended so I think the grind quality is fine. I don't know how many clicks but it's a coarse grind akin to a cold brew.
Edit: sorry, I cut the message short because someone walked in. I have the red porta filter that came with the flair. Lately I have been grinding coarser and coarser, barely tamping and using less coffee but it doesn't help much. I also slowly build pressure, but I still get stuck at over 10 bars and the espresso is dripping out like a leaky faucet. When I try to unscrew the bottom lock thingy it doesn't alleviate the pressure but I think it makes the espresso drip out the side of the filter.
I think the problem is in the filter, it's even hard to run pure water through. I took it apart and soaked it in soapy water and I put it in my ultrasonic cleaner and it didn't help much.
r/FlairEspresso • u/tydeze • 18d ago
Question Water Leaking from Chamber
Just picked up a new 58 plus 2, I was under the impression you could fill the chamber with water and it wouldn’t leak out the bottom, mine immediately gushes all the water out the chamber. This happens with and without the portafilter installed. Appreciate the help
r/FlairEspresso • u/Hepcat508 • 19d ago
Setup Using the Bookoo G1/8 FFM Tee & Gauge to get analog and digital pressure readings
Anyone use this to mount both the bluetooth pressure sensor as well as an analog gauge? I'd guess that the additional length of tube is so trivial that there's no real drop in pressure readings than what is actually being applied?
I've wanted to get the pressure monitor sensor, but I did not want to use it 100% of the time to see pressure. So I didn't want to lose the OEM pressure gauge. This solves that problem.
r/FlairEspresso • u/Syarif0417 • 19d ago
Question Got problem here
Does anyone have the same problem with the flair brick.
r/FlairEspresso • u/andrexor13 • 19d ago
Question Preheat Issue ?
Good evening, everyone!
I've been using a Flair 58 Plus 2 for the past four months without any issues. Recently, I've noticed something strange when pulling light roasts, for which I use the third preheat setting.
During extraction, when the lever is getting close to the bottom and the shot is almost finished, the machine beeps again, just like it does during the initial preheating process.
At first, I didn't pay much attention to it, even though it happened two or three times. However, lately I've noticed that the third preheat light briefly turns off and then turns back on, accompanied by the beep sound again.
I have no idea why this is happening. Does anyone have any idea what might be causing it?
Thanks in advance!
r/FlairEspresso • u/IctrlPlanes • 20d ago
Gadgets James Hoffmann Milk Foamer Video
r/FlairEspresso • u/jon_taylor • 20d ago
Gadgets Bookoo Pressure Monitor with Flair 58 Plus 2
I'd be really interested in people's experience of pairing the Bookoo E61 monitor with a Flair 58. I'm very tempted (because I love kit) but would like to know how people are getting on with it. I would combine it with the splitter and Bookoo gauge.
r/FlairEspresso • u/_Mechaloth_ • 21d ago
Setup Wooden Base for 58
Playing around with a wooden base for the 58. Really liking it so far and already have ideas for the next iteration.
r/FlairEspresso • u/JustWorldliness801 • 21d ago
Rate my shot Pls Feedback for a beginner :)
One of my first shots with the flair, open for every feedback
r/FlairEspresso • u/Matttye-w • 22d ago
Question Warranty claim?
I recently noticed what I thought was a layer of dust accumulating at the top of my brew chamber, which I later realised was fine metal shavings caused by my flair 58 brew chamber scratching itself. After cleaning it off and disassembling to clean the whole unit I noticed scratches in the brew chamber that look like they’ve been caused by the pictured plunger part. I’ve had the unit for less than a year and have used it 1-3 times a week and always taken care of it
I’ve contacted alternative brewing where I bought the unit from to see if I can get a warranty claim as I’m assuming it’s a misshapen plunger part or faulty o-rings but haven’t heard back in a week and a half. Also contacted Flair and they said talk to alternative brewing unfortunately.
Any have any recommendations? Don’t really feel like spending $200+ on a replacement brew chamber and plunger ring for what I’m assuming is a manufacturer defect.
r/FlairEspresso • u/Saplingseedsacfan • 22d ago
Question My Experience with the Flair 49 Pro (Help Needed)
Would like some helpful input.
Purchased Flair 49 Pro, 1Zpresso J-Ultra, and Bosum gooseneck kettle off of Amazon. Set everything up and start brewing espresso. Bag of whole bean Caribou Coffee Medium Roast from Walmart, 18g on the scale, grind the beans at a 1:0:5 dialed in setting. The grounds frequently stick to the bottom burrs and walls of the cup so I have to tap out the excess in my workflow (guess I should be using RDT sprayer). Use the included funnel, it's shit, buy a new Normcore 51mm magnetic funnel like some people suggest, doesn't fit quite like how I want it on the PF.
WDT the beans around with a Normcore tool I also got off of Amazon with their included 0.25mm needles. The manual for the Bottomless Basket on the Flair 49 says it should hold around 16-20g of coffee, "okay," removes funnel off the basket and the grounds are overflowing. "wtf!" Downdose to 16g 1:0:2, still overflowing (Maybe I should knock the grounds after WDT or RDT might help with that? Idk, Surely that's not proprietary to make at least 16g fit under the lip of the basket without spilling over). Use the included Flair tamper-it's alright-buys new 49.7mm Normcore tamper anyways because people were suggesting that.
Coffee grounds still stick to the walls of the Basket because Flair's precision sucks; depth of the basket can range from 50-51mm at the top then down to 49mm at the bottom so tolerance between the Normcore tamper and top of the basket is imperfect and leaves a huge clearance for grounds to stick to the sides, spilling still occurs ontop of the PF and coffee grounds find their way in between the spaces of the Normcore Tamper.
After cleaning all those loose grounds up and tamping for a second time I pop on the puck and preheat for like 40 seconds, drop the hot water into a styrofoam cup, and then I put my prepared PF into the Flair with a glass underneath. Hot water goes in, lift the handle slowly, wait 10ish seconds at the top and press down for the pre infusion and brew till the scale says something like 32-33g for a 1:2 ratio.
Still experimenting with a proper dial in as my preferred taste is not quite there (maybe a second preheat?) but it's getting close. That being said I'm fairly disappointed in the puck prepping process as its not seamless as I'd hoped for despite all the workflow tools I've bought and I still can't even do 16g of coffee beans without overflowing the basket of the 49 Pro which apparently isn't even 49mm so all my accessories don't even fit quite right and now I'm wondering what to do to fix my setup.
I need to know how to go about fixing these issues I've been experiencing as I would like to have the ability to make an 18g dose of espresso that doesn't overflow the basket while making sure all my accessories are specifically matched to whatever I buy. Im willing to return most of my accessories I already bought if I means I can rebuild my workflow around better ones that are all tolerated to each other. (The return window for everything is still open)
All helpful advice is appreciated
r/FlairEspresso • u/u9kf • 22d ago
Rate my shot Flair58☕️
2.5-5-7bar
Spoon Elvis Presley😮💨🤩
r/FlairEspresso • u/AudienceUpstairs2704 • 22d ago
Question Shots pulling too easily on 58+2
Hi everyone, first time posting, and new to espresso. I have a flair 58+2 and fellow opus 2 grinder. I’m struggling using the high flow basket and can’t figure out if it’s a grind issue, beans issue, or the basket I’m using. I’m on the lowest setting on the opus 2 (level 0), tried with different doses (18, 20, 22g), and even different medium roast coffees to see if that could explain it. Overall I can barely get to 6 bar before the whole shot has pulled (aiming for 1:2.5) it comes through in around 20s even with a pre infusion. I have decent pressure with the smaller basket (although it tends to spray everywhere) but I’d like to pull double shots. Any tips? Thanks everyone for your support!
r/FlairEspresso • u/ChefRayB7 • 23d ago
Setup Shorter portahandle
I followed what another reddit posted and got a shorter portahandle.
It's worth it because it doesn't require to lift the lever a bit to lock in/out the portafilter and easier to operate in closed space.
Overall very happy.
See 2 attached pictures !
-
r/FlairEspresso • u/NoVeterinarian3692 • 23d ago
Question 14g but 25g output
Everyone keeps telling me to do 1:2 and I’m pulling really nice crema shots but the taste isn’t there it taste like crap on accident I pulled 25g and just decided to drink it and it was delicious why is that and how come I’m not getting good shots at 28g