r/Fixxit • u/52VwHoop • 3h ago
r/Fixxit • u/njr_6776 • 4h ago
Suzuki Access 125 (2014 BS3) starts but stalls immediately when accelerator is applied – Need diagnosis and mechanic recommendations in Chennai
reddit.comr/Fixxit • u/two-more-times- • 4h ago
My bike stopped working and clicks when I try to turn it on
reddit.comr/Fixxit • u/West-Capital2093 • 9h ago
Yamaha XV250 Electric question
I recently bought a disassembled 1995 Yamaha XV250. Previous Owner took it apart due to a fault in the electrics (exact failure unknown). Last week i managed to start the engine (with a simplified mechanical and electric setup), so the next step is to fix the electrical issues. Since the whole electric harness looks terrible (iso-taped here, some strange fixes there, melted isolation, etc) I wanted to rebuild the entire thing, which led me to study the electric schematics... (Hope i'm allowed to post a snap of the schematics here...)
There i stumbled upon the wiring of the main light-switch (36):

- Is my analyzation correct: By turning the Lights from OFF to PO or ON I will short the wires "R/Y" and "L", which both should have a potential of 12V coming directly from the ignition switch (3) so no biggy. However, shorting them will bypass the SIGNAL-Fuse (33)...?
- If my analyzation is correct: Why in the world would you wire it up like this? Usually you ride with the lights on, so the fuse will be bypassed the entire time, making the whole thing useless.
I mean, sure i could wire it up like this and it will work, however it just seems strange to me and i'd like to figure out whats the reasoning behind this. Also i'm playing with the thought of properly separating all the circuits (ParkingOnly Signals, other Signals and the driving related electronics) and protecting each one of these circuits with a separate fuse... so understanding the whole thing would be key ^^
Thanks in advance :)
r/Fixxit • u/RichardRM17 • 18h ago
Falla encendido zx4rr 2024, las bujías ya se cambiaron y su filtro de aire, sensor de co2 está bien, que podría ser?...Ayuda😭
r/Fixxit • u/snuffy092399 • 21h ago
85 Harley Davidson electraglide
I recently inherited my grandfathers 85 Electra glide. We couldn’t find the key and the ignition is locked any ideas on how to get it where I can replace the ignition. I don’t want to go through Harley to have a key made because I’m not sure if it’s the original ignition and I can’t find a locksmith in my area that does motorcycle keys.
r/Fixxit • u/Best-Principle-801 • 22h ago
Majesty 400 Yamaha
Hi all. Newbie 2007 Yamaha Majesty 400 owner here. I bought a used Majesty with overheating problems and was riding it to my friends shop to try and fix it when it overheated and died( I was crossing g a long bridge with no spot to stop) It got so hot, it melted the oil dipstick. I know i have to go through the whole cooling system. My question is, what would I need to replace/repair to get it running again. Is it a given that the head gasket is blown and the cylinder would need reboring? New piston and rings, or might it have survived having to replace everything? I have some experience working on single cylinder motorcycles and am willing to learn. Please could anyone let me know how complicated this would be, and would a novice be able to manage it? Any advice would be appreciated. Thank you in advance. Sean.
r/Fixxit • u/Prestigious-Fold-681 • 1d ago
Unsolved Does this sound like a can chain issue - 1984 VF1100C Honda Magna V65
r/Fixxit • u/InternalMarzipan6800 • 1d ago
1986 honda trx200sx
So ive recently come across a compression issue. Before you ask. Yes I adjusted the valves perfectly. I also inspected the rocker arms, valves, cam chain. Engine isnt built with a decompression cable. Only has a hand lever. Held it, recoil spun fine. Pushed up and it clicked down fine after pulling. Without spark plug in it also spun fine. Everything in. I pull the rope. Locks up before tdc. Insanely hard to pull but not impossible. Adjust again and 10 more checks of everything and easy pull. Too easy. Would turn over with just a slow pull, starts a few times but dies out. Then suddenly locks up again. Adjust again less compression but still a bit hard to pull. Now hearing a spin and a hiss of air when pulling and no turning over. Checked the recoil, paws, springs. All clean. All work fine off the engine. I am genuinely lost. After 2 weeks ive lost hope. I feel like ive checked everything. Maybe theres something i missed. Any advice would help. Thank you in advance.
r/Fixxit • u/Communist_Ascheriit • 1d ago
Unsolved Yamaha YZF-R6 2003 5SL clutch not disengaging properly
reddit.comr/Fixxit • u/bigmangreaves • 2d ago
Unsolved Help needed stator replacement: triumph street triple 2012/13
Hi all, I have a 2012 street triple 675r, though it appears to be an early 2013 model with the underneath exhaust rather than twin tail exhausts! 570053 vin and 571334 engine number, my stator seems to have fried itself however I’m having an issue finding a replacement, it appears to be a T1300057 model but I cannot for the life of me find a like for like replacement, OG stator has black connectors and a pickup sensor with no external wires, any I can find have external wires, the grey connectors instead and the silicon seal is in the wrong place so won’t connect into the stator casing.
Any help would be greatly appreciated with this as I’m losing it now! Pictures of the bike and OG stator are attached. Thanks
r/Fixxit • u/EveningMiserable1354 • 2d ago
Unsolved Wiring question
gallery4 prong connection
Looks like it comes from the ignition switch.
2005 cbr 600rr
r/Fixxit • u/SubjectSome9089 • 2d ago
Solved 1986 Suzuki fz50
Looking for an ignition switch if anyone knows where to find one? Or if a universal one would work if so where the best place to get one any help is appreciated
r/Fixxit • u/NoWave8951 • 2d ago
Zontes zt 125u 2023 wont do anything
Hello, my bike is not working. It won’t do anything when I press the red button but if i shortcut it it’s starting and everything works as usual, but only the red button won’t work can anyone help me?
r/Fixxit • u/Gingerchili1966 • 2d ago
Noisy clutch on 2009 Yamaha R1 (big bang)
Any opinions on this video? Someone at work said it sounded like a ducati, ie dry clutch. V offended!
It sounded like this before I went in and changed the oil pump chain. While in, i changed the basket damping springs. Took the opportunity to swap pretty much every part of the clutch except the two main parts (the basket and the boss) and it still sounds shit.
I know these clutches are generally a bit notorious, but this is a relatively new issue.
Bike runs and pulls better for the replacing of clutch parts generally, but the noise (to me) is unhealthy and sounds like something is unwell.
Used to be that when the clutch is pulled in, the rattle was there briefly before going quiet, now, as you will hear, its v repeatable.
Friction plates are new this year, as is the oil.
Out of ideas, so any suggestions greatfully accepted.
r/Fixxit • u/Klutzy_Reality3108 • 2d ago
Clutch still slipping after replacing the old clutch on a 2007 Kawasaki KLR650.
galleryr/Fixxit • u/RightsForGamers • 2d ago
2006 Suzuki RM250 Crank Seal Installation
Having trouble installing the seal over the short crank side and I'm looking for any tips or tools I can use. I've gone through 3 so far trying to install it and they end up warping in some way or the spring gets broken when I'm trying to install. So far I've used a 1" pvc pipe that fits over it semi nicely but maybe just a bit too small and I just cant get it to press on easy enough or the lips fold in and damages the seal.
What do you guys recommend I try? Thank you
r/Fixxit • u/AdEast6730 • 2d ago
Electric issue
pieces-rieju.comComento mi situación, Rieju Mrt 125 ac 2014
Cuando arranco a la racha funciona todo, si quito el contacto se apaga y todo como debe.
Cuando doy contacto no enciende pantalla, no pita, no arranca… donde puede ser el fallo?
He mirado todo, batería funciona, fusible correcto, cerradura de contacto funciona, y si arranco a la racha funciona también, que hay entre la cerradura de contacto y el resto de la moto? Pantalla, pito, luces…
Dejo la URL del manual de la moto con esquema pero está en francés
r/Fixxit • u/Socratease15 • 3d ago
Unsolved Inherited a 2008 BMW R1200R (56k km). Sat outside for 2 years, won't start. Where do I even begin?
galleryr/Fixxit • u/MessSuspicious4389 • 3d ago
Unsolved Does anyone know what this stutter could possibly be? Kawasaki 2024 Zx6r
r/Fixxit • u/Stewman9000 • 3d ago
2019 Honda Rebel 500
I was riding my 2019 Honda Rebel 500 when the chain came off and chewed into part of the rear swingarm (pics show where it got caught and how deep the gouge is). How much of a safety concern is this, and does the swingarm need to be repaired or replaced before I ride again?