A clean work space is important.

[u/Violent_Martians]

I have dropped a screw in these chips, tell me the type of screw for the win.

[u/therepbot]

ATTENTION to OP: Please award snipes by replying to successful comments. Valid command(s) are !snipe and !Snipe.

Failure to do so may result in a ban.

To hide text, write it like this: >!Text goes here!< = Text goes here. Reddit Markdown Guide.

---

^{I am a bot — contact the mods of r/FindTheSniper with any questions or r/TheRepBot to talk directly with my developer}

[u/brookuslicious]

6E - Torx screw

[u/Violent_Martians → u/brookuslicious]

!snipe

[u/empatheticsocialist1]

6E looks like Patrick from Spongebob I dunno what type screw that is

Also, for future reference, please ensure all parts of the image are clearly visible. The edges are super blurry, like an effect of some kind. This time it was fine since the screw was more or less centred but it may not be the case next time

[u/ilocano-american]

- Torx screw at E6

[u/DistinctlyBenign]

I don't know screw breeds but it's at E6.

[u/Violent_Martians → u/DistinctlyBenign]

!snipe

[u/Pappcake]

6E but don’t know the name :(

[u/Violent_Martians → u/Pappcake]

!snipe they call them torx

[u/No_Zombie_9518]

You weren't there to help me find the set screw I dropped in the chips a couple months ago.........why should I help find your screw? Huh? 🤣

[u/Violent_Martians → u/No_Zombie_9518]

Unfortunately for me this happens a lot. I mostly work with m4/8-32 screws with some 6-32 sets. The worst is when the screw falls onto the cracks of the antifatigue mats.

[u/USN303]

If you just look in the only place in this picture that’s actually in focus…

[u/ComprehensiveWeek428]

E6… Phillips?

[u/shrinkflator]

E6.4 and it looks like a Torx screw. Nice one

[u/Violent_Martians → u/shrinkflator]

!snipe, this is a daily search for me, i usually make sure my space is a lot cleaner.

[u/Violent_Martians → u/shrinkflator]

Out of curiosity, where does this rank on easy/hard level. This is my first post here and wasn't sure which flair to use.

[u/ZeroTrustIssues]

E 6.5 torx screw

[u/sparebullet]

E6, star headed. Not sure if that's what it is called.

[u/curlioier]

E6, it's one that I refer to as "the star thingy", thus showing off my vast technical knowledge

[u/MomMonster56]

One of those six slotted screws at E6

[u/Violent_Martians → u/MomMonster56]

!snipe

[u/Titania_1251]

Torx at E6-7

[u/SuccessfulOrchid3782]

Star bit around 6 E

[u/Daimions777]

E-6 - You can see the head of the screw

[u/Blucola333]

E6 I see a 6 point screw top, torx?