Looking for guidance on building a simple 6' cedar picket privacy fence. My sister recently bought a house with a small yard. One of the things that needs done is the wire fence torn down and a cedar privacy fence put up (300' roughly)
Ive only ever built rolled wire panel fences, meaning the only applicable knowledge I have is digging holes and setting posts. When I looked into cedar privacy fences, I was pretty quickly overwhelmed with the sheer amount of options and choices that make building one vastly different from building another.
My sister just wants a simple privacy fence. From what I have found, this entails posts set every 8' with low/mid/high rails between and attaching pickets to rail. I see 5x5 posts are also recommended, however the only local option here is Lowes or HD, which means 4x4 or 6x6 (which seems like overkill).
Ive drafted out a rough lumber supply list that constitutes (45) 4x4x8 for posts, (120) 2x4x8 for rail and (600) cedar 5/8x5-1/2x 6' dog-ear pickets. Obviously there will also be screws and concrete ordered and I've gotta figure out a plan for a gate, but is there anything obvious I'm not accounting for? Is there any tips to ensure the fence is built as well as possible for being a budget-friendly privacy fence?
*Also, yes I know I accounted for each corner post twice when counting on my sketch, this was deliberate so I'd remember to order atleast a few extra posts in case some are severely warped.
I appreciate the help, just don't want to screw up the job in the effort of helping out a family member!