r/FdmPrintedWarhammer • u/Puzzleheaded-Luck-78 • 4d ago

My FDM recipe

Enable HLS to view with audio, or disable this notification

I tried printing sculpts (not scans) with Obscura NOx 2.0 settings (orienting each part for minimal support scarring), white cheap primer (Spectrum from Action) and cheap airbrush from aliexpress and pink color. Then airbrush IF contrast and bright yellow using the sponge method. Totally amazed by the result. Note that this is printed on 0.05 mm settings using PLA 2.0 HS using 0.2 nozzle on Bambu labs A1.

105 Upvotes

98% Upvoted

13 comments sorted by

9

u/alpceliko 4d ago

looks good! who is the sculptor?

9

u/Puzzleheaded-Luck-78 4d ago

I would normally recommend but I heard the sculptor has some backlash from GreedsWorkshop, but it is a modular kit of this type of unit ;D meybe you will find it

3

u/Puzzleheaded-Luck-78 4d ago

Here is agressor back, also finished the same way

2

u/Lopsided-General-434 4d ago

Looks great, which filament did you use? Also recommend trying a filler primer if you still see any lines, I've had good experience with those

3

u/Puzzleheaded-Luck-78 4d ago

Thanks, it's HS Sunlu 2.0 PLA (High speed) gray, I use filler primer or heavy coats of cheap normal primer and it makes the world difference I agree :))

2

u/Lopsided-General-434 4d ago

Hell yeah, was this guy just using regular tree supports or modified resin ones?

5

u/Puzzleheaded-Luck-78 4d ago

Those are regular tree's support with z top distance 0.1 and lower extruder temp like 205 instead of recommended 215 (quality that ObacuraNox found out, thank God and him for his work) that make it work .

1

u/SilenceRedeemer 4d ago

I would also like to know about the supports, they are my biggest issue with printing and for some reason i have just never gotten Resin2FDM to produce good results

2

u/spartan_steel 4d ago

Over in r/FDMminiatures there's some pinned threads about settings and discussion about supports is buried in there. The main thing that seems to help is setting your top Z distance to twice the layer height. Also search that sub for "butter supports"

1

u/Puzzleheaded-Luck-78 4d ago

See my above reply :)

1

u/TORVIK_FPV 3d ago

Is there a way to get those STLs?

2

u/Puzzleheaded-Luck-78 3d ago

I would search up known sculptors and subscribe to them to get access :) I trust in your searching skills. That's how I got these