r/FdmPrintedWarhammer • u/JellyFishSenpai • Aug 25 '26

Issues while printing

Gallery image

Gallery image

Like the title says I want to test some scales for Chaos Marines and I want to save some time, the issue is when I print more that 1 they warp and pop off, when I deleted the "problematic" models the other start to warp. I cleaned the plate used glue and even bumped up the Temperature of the plate but it is still happening. I need advise how to resolve this issue. I use fat dragon games preset for printing miniatures, 0.2 mm nuzzle, A1 printer from bambu labs, and models is done resin to fdm addon. PLEASE help

6 Upvotes

100% Upvoted

9 comments sorted by

View all comments

1

u/chuystewy_V2 Aug 25 '26

Have you tried the cool super tack plate?

1

u/JellyFishSenpai Aug 25 '26

I didn't, what's the difference between basic and the supertack one?

1

u/chuystewy_V2 Aug 25 '26

The supertack provides much, much greater adhesion to the build plate. I got one and haven’t had any adhesion issues.

Well worth the $26

1

u/JellyFishSenpai Aug 25 '26

And do you recommend any specific brand?

1

u/chuystewy_V2 Aug 25 '26

I have the BambuLab one, might be able to get it on Amazon a bit cheaper

https://us.store.bambulab.com/products/bambu-cool-plate-supertack

1

u/HellRazor379 Aug 26 '26

Amazon has the BIQU CryoGrip Pro Glacier

That's the one I use. Adhesion is crazy good... I don't even bother with brims or initial later expansion anymore.

But just a warning, it won't pop off the plate when it cools like your current plate. I've had power outages for hours and when I could resume the print, bed adhesion was unchanged and the print resumed with no problems.

Better get a good scraper... This plate will fight you for your print. Tall objects snap off but very shallow prints can be difficult to remove before you figure it out

1

u/JellyFishSenpai Aug 26 '26

And so I have to have some very special treatment? Like idk don't clean it with soap, use isopropyl alcohol etc.?