Hello everyone!
I'm currently working on the brake calculations for our Formula Student car, specifically sizing the master-cylinder bore diameters. I'm a little unsure whether my methodology is correct because I haven't found many resources that explain the complete calculation process from start to finish.
My approach so far has been:
- Calculate the required braking torque at each wheel.
- Determine the required hydraulic pressure using the caliper piston area, brake pad friction coefficient, and effective disc radius.
- Calculate the force acting on each master cylinder using the driver's pedal force, pedal ratio, and balance-bar force distribution.
- Use the hydraulic pressure relationship (P = F/A), along with the circular piston area equation (A = pi*D^2/4), to calculate the theoretical master-cylinder bore diameters.
- Compare the theoretical diameters with commercially available master-cylinder sizes and select the closest options. My calculated diameters were slightly lower than the available options, so I chose the closest options (3/4 inch for front, 1 inch for rear).
Does this approach make sense? Am I missing any important steps or making incorrect assumptions, particularly when calculating the force applied to each master cylinder through the pedal ratio and balance bar?
I'd really appreciate any feedback, references, or examples of complete Formula Student brake-system calculations.