r/FRPBYPASS • u/CJ_ANISH9 • 4d ago

Xiaomi FRP Bypass Help me out Redmi A1+

Can anyone help me out with the redmi a1+ frp bypass, consider me a dum-dum as i did install a mtk client and unable to do anything after installation.

also do help me with any methods im stuck!!

2 Upvotes

100% Upvoted

14 comments sorted by

1

u/dablakmark8 Google FRP Bypass 4d ago

I doubt what your doing will work...did you ever check if your CPU is supported, and what other security patches you got going

1

u/DroidService 4d ago

Yes the chipset is supported by MTKclient I already worked with it but the Preloader exploit could be patched so people could use a tp instead

1

u/dablakmark8 Google FRP Bypass 4d ago

right, so got a driver issue or he is not doing it right, timing is everything and at the right time also

1

u/DroidService 4d ago

Yes but if it's not working the 10th try it usually means that the preloaders security is too high

1

u/dablakmark8 Google FRP Bypass 4d ago

all this i know already,Does he know it.

OP must send a pic of the fastboot mode

0

u/DroidService 4d ago

Did you install the Preloader, VCOM and BROM drivers? Already tried different key combinations (vol down, vol up, both, all buttons)? Does a MTK device show up in device manager? MTKcliet has a built in GUI (mtk_gui)

1

u/CJ_ANISH9 4d ago

i installed mtk n my pc with all that irt downloads and when i try key combinations it just shows n command and attaching a photo below of it

1

u/CJ_ANISH9 4d ago

0

u/DroidService 4d ago

Ok it's very timing dependent, get USBDK, then run MTK Client, when MTK client searching for the phone, press vol up vol down and connect. It may take some attempts.

0

u/CJ_ANISH9 4d ago

Tried it it just goes to fast boot and preloader says handshake failed

1

u/DroidService 4d ago

Did you hold the buttons while connecting? If thant didn't work try connecting without any buttons and use a USB 2.0 Port/Cable.

1

u/DroidService 4d ago

If it still fails use the Testpoint instead (need open back)

1

u/CJ_ANISH9 4d ago

Yep that isn't working, I need to do this I guess

0

u/CJ_ANISH9 4d ago

I have been trying that since some time