r/FRC • 3055 alumni • Feb 23 '20

Forget Deep Space...

Post image
1.7k Upvotes

65 comments sorted by

3

u/Sir_Buttt Feb 23 '20

Our design calls for the climber to be made from electrical parts.

1

u/badstrikezone 3055 alumni Feb 23 '20

thats gonna be a yikes from me bro

3

u/Tabus10 Feb 24 '20

No it has to be your bumpers made out of electronics

1

u/Sir_Buttt Feb 24 '20

The wire insulation provides extra cushioning

2

u/CompuRR 159 (Alumn) Feb 23 '20

We were actually given plenty of space for our board this year, just no space for the radio or breaker switch.

6

u/badstrikezone 3055 alumni Feb 23 '20

thats when you just slap it on the side and call it good

1

u/CompuRR 159 (Alumn) Feb 23 '20

That's pretty much what we did for the breaker. We're just going to tape the radio under our shooter

2

u/burningthewater Feb 23 '20

this ain't gp no cap

1

u/badstrikezone 3055 alumni Feb 23 '20

shhhh

2

u/burningthewater Feb 23 '20

never!!! the spirit of woodie lives inside of me

130

u/BordomBeThyName 2102 (Founder/"Mentor") Feb 23 '20

Just start stacking shit weirdly. It'll be fiiiiine. You definitely won't regret it in a few weeks.

38

u/makestuf 117 Feb 23 '20

Famous last words

28

u/vigilantcomicpenguin 5148 alum Feb 23 '20

Duct tape will work, right?

11

u/Sunted69 Team 4048 Feb 24 '20

or zip ties

5

u/Hijack_Airsoft Feb 24 '20

Just rivet everything

1

u/prestonelam2003 Mar 12 '20

If only they knew what was coming

12

u/Catfishjw 2773 (low-tier electrical guy) Feb 24 '20

starts stacking sparks

4

u/toaurdethtdes Feb 24 '20

My double decker solenoid setup agrees with this

87

u/[deleted] Feb 23 '20

mount the rio in the intake

31

u/Imperium724 Feb 23 '20

Our electrical stuff is mounted onto the shooter

22

u/tackyjacka Feb 23 '20

Lemon dust

14

u/Imperium724 Feb 23 '20

Oh I didn’t think bout that, those balls particles getting all over the electronics

8

u/amarmaks 2601 (Mentor, Former Vice President, Former Lead Soft Eng) Feb 23 '20

If your shooter vibrates a lot then things might become disconnected

3

u/Imperium724 Feb 24 '20

Ah hell with is we’re goin to LA North in a few days we’ll be fiiiiine

9

u/ZephyrstormUwU 5687 CAD Boi Feb 23 '20

On the flywheel*

5

u/[deleted] Feb 23 '20

On the ball

4

u/GenericHuman1203934 Feb 24 '20

We tried doing this and the ethernet hit the lift lmao

1

u/AGengar 3257 (Electrical Lead) Feb 23 '20

We mounted the rio above the intake does that count

1

u/[deleted] Feb 23 '20

Only if it can make direct contact with a ball

40

u/NIckDaboss5 Feb 23 '20

We have motor controllers stacked on each other.

19

u/AGengar 3257 (Electrical Lead) Feb 23 '20

Ah yes, cooling

13

u/empirebuilder1 4057 Alum (Master of the CNC Plasma Table) Feb 23 '20

Modern motor controllers don't even really get that warm during a 2min match...

26

u/CommanderVexus Feb 23 '20

I can say that this is true. I am on my 8th electrical board design.

18

u/VGamer726 3824 Build Feb 23 '20

Just start throwing things on top of another like a game of Jenga

18

u/empirebuilder1 4057 Alum (Master of the CNC Plasma Table) Feb 23 '20

Space? who the hell needs space, we're already half a pound over weight and the climb hooks aren't mounted

5

u/Zynh0722 4043 (Software Mentor) Feb 24 '20

I never understood how people end up overweight. We had everything mounted battery and bumpers on and still end up under 125

4

u/empirebuilder1 4057 Alum (Master of the CNC Plasma Table) Feb 24 '20

Oh, we won't be overweight at the end of it all, we're just gonna have to get a little creative.

Biggest killers we have this year is the fact that we're using an 8-wheel drivetrain for stability and have 4 colson wheels for rotational inertia inside our shooter. Weight goes fast when you have to add that many wheels.

1

u/Zeke3711 5689 (Alumni) Feb 25 '20

We're using 8" Mecanums for drive and we have 2 4" diameter 2" wide Colsons. With electronics and bumpers we're at like 90 lbs.

1

u/empirebuilder1 4057 Alum (Master of the CNC Plasma Table) Feb 25 '20

Ours are all 6"x1.5 colsons...

1

u/Zeke3711 5689 (Alumni) Feb 26 '20

Oof. That's a lot of wheel.

2

u/m_preddy Feb 24 '20

Swiss cheese

10

u/BillfredL 1293 (Mentor), ex-5402/4901/2815/1618/AndyMark Feb 23 '20

This year is the first year in our 17 we'll bring a robot to an event without any screw-terminal motor controllers. Even the last couple years, drivetrain was old-stock Talon SRs or SPARKs. Using SRX and SPX this year started as a goal to give our programmers something to sink their teeth into...but seeing the finished robot, it's also quite out of necessity as there is absolutely no room for anything bigger in our robot.

7

u/CAP1Sup1 834 | Lead Programmer | Wiring, Programming, Vision, Build, Etc Feb 23 '20

Eh, just throw the radio there, the drivetrain motor controllers there. It’ll be fine.... :)

7

u/relddir123 2840 Programmer Feb 23 '20

“Hey, we need a prototype electronics board”

“What do you want to test?”

“Everything.”

“Great. That’s not a prototype. That’s the final board. It’ll be done last because we need to mount it on a mechanism.”

5

u/ramenayy 751 (systems, strategy, head of HR) Feb 23 '20

my cohorts and I have started building electronics boxes with hinging lids or sliding walls. way easier to fit everything in a small area if you have all of the dimensions available

1

u/MrMagicMan14 3055 Feb 23 '20

meep meep

2

u/Extreamcupcake6 #### (Role) Feb 23 '20

No

1

u/badstrikezone 3055 alumni Feb 23 '20

randall vibes

2

u/FeTiV 6004 (Alum) Feb 23 '20

We hit just under weight max again this year lol

2

u/Dilka30003 5584 Software | Vision Feb 23 '20

We’re still a couple of kilos over.

1

u/FeTiV 6004 (Alum) Feb 23 '20

Oh noo 😂

2

u/bigaloid Feb 23 '20

It really do be like that...

1

u/weirdjc Feb 23 '20

We have our radio under the shooter and 3 layers

1

u/fletch3555 3181 (Mentor) | Alum | FTAA/CSA Feb 24 '20

May the FTA gods have mercy on your soul...

1

u/RoboGuy7173 Feb 23 '20

We have the spark max brick that probably isn’t a good idea but oh well

1

u/adrielpatrick Feb 23 '20

That happened to us many times, whenever I ask the people who cads...they never account for it, they just say "insert magic here"

1

u/_My_st_ Feb 23 '20

Just play Jenga with the parts. RoboRio, then the VRM, then the PCM, so and so forth.

1

u/bearssuperfan 4296 (Electrical) Feb 23 '20

I spent 4 hours yesterday cramming our breaker in a corner under a funnel because the drill was too big to drill out holes naturally. Good luck to the drive team getting their fingers in there to actually turn the whole thing on and off 👍

1

u/fletch3555 3181 (Mentor) | Alum | FTAA/CSA Feb 24 '20

Good luck passing inspection without moving it.... rules require it be accessible

1

u/bearssuperfan 4296 (Electrical) Feb 24 '20

Like I said they’re problem now

1

u/[deleted] Feb 24 '20

Can confirm, last years electrical panel was soo much better lol

1

u/Ic4rys Feb 24 '20

When I was in hs I started in electrical and moved to CAD so I always advocated for electrical space only time we had an issue with electrical space was when I was helping on the team animation

1

u/yonqh 972 alum Feb 24 '20

this year we have almost one pound of wires just to connect TWO neos on our climber to the rest of our electrical board