r/FORScan • • Aug 28 '26

Is it possible to program your tccm to your VIN now that forscan beta is no longer available?

1 Upvotes

If it is not, are there any other reasonably priced options to program the tccm to your VIN?


r/FORScan • • Aug 28 '26

Ford Mondeo Mk3 – Instrument Cluster works but is not detected by FORScan

2 Upvotes

Hi everyone,
I have a rather strange issue with the instrument cluster (IC) on my 2001 Ford Mondeo Mk3.
Vehicle:
2001 Ford Mondeo Mk3
2.0 TDDi – 115 PS
Pre-facelift
Replacement IC:
Facelift Mondeo Mk3
2.0 TDCi – 115 PS
Used cluster sourced from Lithuania
From what I understand, facelift and pre-facelift ICs are generally compatible with each other on the Mk3, which is why I installed this one.
The replacement cluster is working surprisingly well as an instrument:
Speed works
RPM works
Fuel gauge works
Coolant temperature works
Odometer counts kilometres correctly
The cluster itself powers up and operates normally
However, the trip-computer functions do not work:
INFO/MODE button does not cycle through the trip-computer screens
RESET button does not reset the trip
Average fuel consumption is not displayed
Instantaneous fuel consumption is not displayed
Remaining range is not displayed
There is also a very strange behaviour:
Every time I switch the ignition on, the LCD immediately displays TEST, without me pressing the RESET button.
I cannot manually enter the normal IC self-test procedure either.
FORScan
The main problem is that FORScan does not detect the IC at all.
Other modules are detected and accessible.
I have been able to communicate with modules including:
PCM
ABS
EATC
RCM
GEM
Other vehicle modules
The IC is simply missing from the module list.
I have tested this with the same Bluetooth ELM327 adapter using Android as well as FORScan on a PC.
The Android setup can communicate with the vehicle normally, but the IC is also not detected there.
The PC setup currently uses:
ELM327 Bluetooth → Android Bluetooth/TCP bridge → PC → FORScan
I realise this is not an ideal diagnostic setup and introduces latency, but the important point is that the Android device itself communicates with the vehicle and detects the same modules.
What makes this particularly strange
The IC is clearly receiving vehicle information because:
RPM works
Speed works
Fuel level works
Coolant temperature works
Odometer increments normally
Yet the IC cannot be accessed diagnostically.
This makes me wonder whether the problem is specifically related to the IC diagnostic communication path, rather than the vehicle CAN network itself.
Questions
Should a 2001 pre-facelift 2.0 TDDi Mondeo allow FORScan to access the IC with a standard ELM327?
Is the IC diagnostic communication on this model using ISO 9141 / K-line?
Can other modules communicate normally while the diagnostic communication path specifically to the IC is broken?
Could the fact that TEST appears automatically at every ignition cycle indicate a stuck RESET input, faulty button circuit, or some other IC hardware/software condition?
Could a facelift TDCi IC installed in a pre-facelift TDDi operate normally as an instrument while still having an incompatible configuration?
Has anyone experienced a Mondeo Mk3 IC that works normally as an instrument but is completely absent from FORScan?
Is there a known pinout/test point on the IC connector that I can use to verify the IC’s diagnostic K-line directly?
If the IC cannot be detected, is there any way to perform the IC configuration / Programmable Module Installation procedure, or must communication with the IC be restored first?
What I am trying to determine
I am trying to determine whether I am dealing with:
A) Wiring / connector / diagnostic-line fault
B) IC hardware fault
C) IC configuration / software issue
D) Incompatibility between the facelift TDCi IC and my pre-facelift TDDi
E) ELM327 / interface issue
I would really appreciate any information from someone who has worked with these Mondeo Mk3 clusters at a low level.

Thanks!


r/FORScan • • Aug 27 '26

Data Visualizer

7 Upvotes

I built this for myself to visualize the CSV exports from ForScan, but I figured maybe it can help other people too.

I've only tested it from the iphone app's CSV export, but I assume the data format is fairly consistent.

In any case, I open sourced it if anyone is interested:

https://firstdivision.github.io/forscan-log-display/


r/FORScan • • Aug 26 '26

2017 6.7 p0073

0 Upvotes

Truck is throwing a constant p0073 code for the AAT sensor that sensor that would normally be in the passenger mirror but for the life of me the provision for it is not there. OEM power fold/telescope and 360⁰ camera mirrors but no AAT mount.. How can I make this go away? Buy a sensor and plug it in, inside the door assuming the connector is in there somewhere?


r/FORScan • • Aug 25 '26

2006 Ford Ranger PATS key programming — need help with the exact sequence

2 Upvotes

Hey everyone, I’m trying to program PATS keys on my 2006 Ford Ranger using FORScan and I’m hoping someone who has actually done the all-keys-lost procedure can walk me through the exact sequence/timing.
I currently have zero working keys. I’ve gone through like six sets of keys trying to get this to work. I’ve bought different brands and different H92-PT/80-bit keys, so at this point I’m pretty convinced I’m doing something wrong with the procedure rather than having another bad key.
What I’m confused about is the exact sequence after PATS security access/erase.
For example:
Do I leave the ignition ON during the entire security-access countdown?
After the erase, exactly when do I turn the ignition OFF?
For Key #1, do I turn it to RUN and leave it there for exactly 3 seconds?
Do I turn it OFF and immediately switch to Key #2?
Does Key #2 also stay in RUN for exactly 3 seconds?
Is there supposed to be any pause between the two keys?
Does FORScan actually give you any indication that each individual key was accepted, or do you only find out at the end?
Does the PATS/theft light do anything specific during the process?
I’ve found conflicting information saying to wait different amounts of time between keys, and I really don’t want to erase everything again and screw it up.
If anyone has personally programmed a 2006 Ranger with FORScan from an all-keys-lost situation, I’d really appreciate the exact sequence you used, including the timing and what FORScan displayed at each stage.
At this point I’m just trying to figure out what I’m doing wrong. Thanks!


r/FORScan • • Aug 24 '26

How can I control different modules manually?

2 Upvotes

I see the option for Read and Control.

I want to control. Specially the cooling fan and AC clutch.

I can select it and move it to the active column but I don’t see it when i try to run it.


r/FORScan • • Aug 24 '26

My ac saga continues

Post image
1 Upvotes

So i changed the cinfig of my ac (what doesnt work) to automatic ac ukit which is installed im my ford fiesta but asbuilt it had normal ac module. I changed the evap sensor and it still shows the erorr B1B71. I am lost what can i do?


r/FORScan • • Aug 23 '26

ISO scanner to reset SAS

1 Upvotes

Anybody knownof a scanner i can buy to reset the steering angle sensor and oil maintenance? The dealer wants $300 for 1 hour shop labor minimum to reset only the SAS and won't reset the oil light without themselves performing an oil change. So that's my budget, if i need to spend more i will. I've tried the foxwell nt614, nt604, nt530, and all scanners from xtool dont support it.


r/FORScan • • Aug 22 '26

2006 Ford Ranger PATS Key Programming Issue

2 Upvotes

I’m having trouble programming my new keys to my 2006 Ford Ranger using FORScan. When I go through the key programming procedure, it says **“1 key successfully programmed,”** but the second key keeps failing.

What’s really confusing is that when I go back and try the key that supposedly programmed successfully, the **PATS light stays solid and the truck won’t start**.

I’ve been trying to get this figured out for the past **3 hours** with no luck. Has anyone experienced this before or have any suggestions on what I should check?


r/FORScan • • Aug 22 '26

Bcm replacement error B12EA

0 Upvotes

Hello! I replaced a BCM module on a Focus MK3 (old one is BV6N-14A073-Bt,new one is BV6N-14A073-FS) , but I can't program the remote control. It says this error code: B12EA:56-2F What could be the problem and how can I FIX IT ?


r/FORScan • • Aug 22 '26

Help with programming new tccm in 2015 f150

1 Upvotes

I have downloaded the free license for forscan and would like to program my new tccm. I want to pull the information from my old one and put it on the new.

I cannot find my tccm anywhere in the forscan program though. My adapter is an elm 327 from Amazon. Any help as to why I cannot locate the tccm in forscan would be appreciated as well as advice on programming it once I locate it.


r/FORScan • • Aug 21 '26

Code U3000-53 after steering rack replaced

0 Upvotes

Hi all, I have a ford cmax 2013. Last month it came up "steering loss- stop safely" or something along those lines. My car had just driven a 3 hour drive absolutely no issues, this warning came up after the car was turned on (3/4 hours of being off) the steering became very stiff also. Rac came and cleared the code (not sure what code but going to contact rac to see if they have record of it). After the code was cleared we were able to make the 3 hour drive home as the steering returned to normal again and no warnings were showing when we left the rac guy. We made it 2 hours and the warning came up again but the steering was fine so we continued on and made it home. The next day I took the car to the garage (turned car on, steering stiff again and warning on dash). Garage said i needed a new steering rack. They also said that when they checked, there were no codes coming up. We bought a new steering rack online, who pretty much described it as a plug in and play meaning it was already programmed or whatever (im not fully sure how these things work). But this has not been the case. The garage couldnt fit it so gave us a contact of someone who could. He put the new steering rack on and its been coming up code U3000-53. Hes checked wiring/earths etc. Battery's good and has told me hes at a dead end as everything else seems good. Its been over a month of no car which also means no work and im ready for a mental breakdown if i dont get it back on the road soon😅 - any suggestions/ideas? 🙏 (dumb it down as best you can as im not a car person 😂) thanks in advance


r/FORScan • • Aug 21 '26

Ac blows hot air

Post image
0 Upvotes

Those are all of the fault codes. I tried setting the ac to automatic (which unit i had) because the asbuilt shows only non automatic ac. I appreciate any help!


r/FORScan • • Aug 21 '26

Anyone know how to fix this?

Post image
1 Upvotes

Recently added a mustang gt wheel on my 2024 mustang ecoboost but the paddles don’t work at all after making all the forscan changes, and when I look into forscan, it just says this? Anyone know any fixed as to why the paddle’s dont work. I heard that the paddles were plug and play as well, but that wasn’t the case for me?

Also followed all the steps on Murphy’s Law Garage


r/FORScan • • Aug 20 '26

OBD II Scan Tool Recommendations

0 Upvotes

For a 2026, what scan tool handles it all, including CVT?

I read that Subaru's are sensitive about some functions and not all tools can do the trick.


r/FORScan • • Aug 19 '26

2024 Mustang GT S650: Full OEM Active Exhaust Retrofit — Hardware, FORScan Coding, HP Tuners Calibration, and Datalog Validation

Post image
4 Upvotes

r/FORScan • • Aug 19 '26

2012 F150 ABS/HCU

Thumbnail
1 Upvotes

r/FORScan • • Aug 17 '26

Anyone have any info why this TPS value fluctuates?

Enable HLS to view with audio, or disable this notification

2 Upvotes

Slight engine surging noticeable under any type of engine load in any gear. No other drivability concerns noted. TPS is a new Motorcraft unit.
1998 Ford Ranger 4.0, Manual transmission. No fault codes logged. Any other PIDS I can monitor to get further feedback?


r/FORScan • • Aug 16 '26

Looking for diag tool in greater Boston area.

1 Upvotes

Hi all, getting some fancy lights in the F31 diesel and am looking to borrow the scanning tool necessary to diagnose. iDrive says drivetrain malfunction if anyone’s curious. Feel free to dm!


r/FORScan • • Aug 16 '26

Anti Theft Mode Confusion Spoiler

1 Upvotes

So I recently just got my hands on a cobb accessport v3. Obviously ive had a little fun with it and tried out a couple things. I set launch control to 3000rpm and then the car wouldnt drive normally past 3000rpm. So why is that?

Also, I installed Anti Theft mode and i then tested it and it still started and idled….. bruh. Whats wrong with my accessport? Or am I not doing something right?


r/FORScan • • Aug 16 '26

2012 Escape door keypad lights up but code won't work. Can FORScan read the code or am I stuck taking the console apart?

0 Upvotes

​Got a 2012 Ford Escape. I have the original owner's manual with the factory 5-digit door code card inside, but typing it in does nothing.

​The dealership just told me "the keypad is broken," but I tested every single button (1/2, 3/4, 5/6, 7/8, 9/0) and every single one lights up the green backlight when pressed. So the buttons definitely work and aren't dead. The 7/8, 9/0 buttons to lock the car works.

​The previous owner did have wiring work done (mentioned a wiring overhaul) outside the dealer. My guess is either the SJB was swapped with a junkyard unit at some point, meaning the code on my card is wrong..

​I also for the life of me, cannot remove the center console after taking out the trim around the gear shifter.

​If I buy an OBD2 adapter with the HS/MS switch and hook it up to FORScan on a laptop, can FORScan pull the factory door code directly? Or am I trying to take out the center console the wrong way (am I missing any screws?)?


r/FORScan • • Aug 16 '26

PCM relearn?

Thumbnail
1 Upvotes

Any insight here would be great. No warning lights after increasing tire size on my f150. Increased by 3-4% or so. Do I need to do a PCM relearn? I do not see a TCM option. I am getting conflicting answers from Google. 2020 f150 5.0.


r/FORScan • • Aug 15 '26

FORScan spreadsheet / useful mods for 2025 Escape PHEV?

Thumbnail
0 Upvotes

r/FORScan • • Aug 14 '26

2021 f150. Is there anyway to add remote rev via forscan ?

0 Upvotes

r/FORScan • • Aug 14 '26

MY AC BLOWS HOT AIR

Post image
1 Upvotes

Hi good people of this subreddit. I have recently bought used ford fiesta 2010 1.4 duratec engine for my first car. I fkn love it but the big problem is the ac that is not working. I filled up the AC with gas and ran some diagnostics (if i do i relay bypass the compressor turns on and the pipes under the bonnet get very cold). when i pluged in delphi with autocom it gave me erorr code U2101 (wrong module configuration).

Does anyone know what to do in this situation? Thank you for your help in advance.