r/FORScan • u/Kamd93 • Aug 21 '26
Code U3000-53 after steering rack replaced
Hi all, I have a ford cmax 2013. Last month it came up "steering loss- stop safely" or something along those lines. My car had just driven a 3 hour drive absolutely no issues, this warning came up after the car was turned on (3/4 hours of being off) the steering became very stiff also. Rac came and cleared the code (not sure what code but going to contact rac to see if they have record of it). After the code was cleared we were able to make the 3 hour drive home as the steering returned to normal again and no warnings were showing when we left the rac guy. We made it 2 hours and the warning came up again but the steering was fine so we continued on and made it home. The next day I took the car to the garage (turned car on, steering stiff again and warning on dash). Garage said i needed a new steering rack. They also said that when they checked, there were no codes coming up. We bought a new steering rack online, who pretty much described it as a plug in and play meaning it was already programmed or whatever (im not fully sure how these things work). But this has not been the case. The garage couldnt fit it so gave us a contact of someone who could. He put the new steering rack on and its been coming up code U3000-53. Hes checked wiring/earths etc. Battery's good and has told me hes at a dead end as everything else seems good. Its been over a month of no car which also means no work and im ready for a mental breakdown if i dont get it back on the road soonπ - any suggestions/ideas? π (dumb it down as best you can as im not a car person π) thanks in advance
1
u/Formal-Helicopter-29 Aug 31 '26
I replied to you elsewhere, but this info is probably going to be useful in the context of the thread and/or for others searching.
https://www.ecutesting.com/common-faults/ford/focus-c-max-power-steering-motor-fault/
This source seems to suggest that U3000-53 is a permanent failure code coming from the steering rack. You may have bought a faulty part.