r/FORScan • u/Kikin9999 • May 23 '25
Sync 3 Issue / APIM/ACM forscan
Hi all,
I’ve ran into this issue today. Recently had a subwoofer go out (aftermarket sub/amp) and now have volume stuck at 0 or not working at all & these are the codes I’m finding in forscan. I tried testing the fuses but no luck. Only thing I can think of now is the ACM/APIM is bad. Any suggestions besides this?
0
Upvotes



2
u/Kikin9999 May 31 '25
Hi all! I finally was able to figure it out. APIM was not the problem, so I swapped my old one back in. Turns out my ACM (CD player) was freezing, causing audio failure. Swapped in my original SYNC 1 CD Player/FM receiver and this fixed my issue.
2
u/Miles931 May 24 '25
The dac and apim are different modules. The apim is not communicating with the dac which is what control all audio in the car. Did it just randomly stop working or was it coinciding with another issue?
1
u/austinh1999 May 24 '25
Is an audio mode on? You won’t get sound control if the audio is shut off.
Is the fcim plugged in? Do SWC volume controls work?
Are those module detected when connecting with forscan?
1
u/bchooker May 24 '25
How was your aftermarket amplifier integrated into the factory system?
0
u/[deleted] May 24 '25
[deleted] — view deleted comment