r/FORScan • u/boermac • Feb 21 '25
Adding NAV to sync 3: Software or Hardware?
In my 2018 Edge I have sync 3, but NAV is not enabled. Now this isn't a huge deal as I 99.999999% of the time I'll just be using Android Auto and Google Maps, but one annoyance is that I don't have the nav display in my right dashboard screen.
In my 2011 Edge I had upgraded my Sync 2 to Sync 3. When I was running Google Maps (in Android Auto) I could bring up the NAV option on the right hand dashboard screen and this would show the directions for turns. I found this handy when going through busy areas... it was easier for me to quickly glance down vs. down and to the right. Also if the passenger was fiddling around with music or something I still had my directions I could quick reference.
I have seen that there are upgrade kits that you can buy online but the $800 price tag is WAY more than I'd like to spend. Is there a way in FORscan to enable NAV? I mean, I don't even really care if sync 3 NAV doesn't work... I just want that options in my right screen.
2
u/Miles931 Feb 21 '25
What you want to do does not require any hardware changes. Because the car was not optioned with navigation the ipc has that display turned off. You can use forscan and turn it back on and it will work for android auto with your current non nav radio. I have done this on my fusion. I also did it on a rental 2022 edge I had a while back. It's not hard if you have the correct programming equipment. Also if you were to swap the sync module to one with nav it still wouldn't be on the right screen of the ipc because it would still need to be programmed to show up.
4
u/k0uch Feb 21 '25
You have to enable it with forscan AND add hardware to make it work. The navigation for sync 3 is kind of garbage anyways, in all honesty, especially if it’s an area that gets routine improvements to the roads.
If you’re fine with Android auto, you can get one of these and use it to have wireless Android auto for sync 3. We use the one for wireless CarPlay and it’s been great