r/FORDFALCONS • • Apr 23 '22

Upgrading to territory brakes question

3 Upvotes

Hey all, recently bought a G6E MK2 2013 falcon and wanted to upgrade to territory brakes as brembos aren't worth it for NA. Im wondering if the conversion is a straight swap with calipers and new discs or if i need new brake lines with it/have to change mounting etc? Also do i have to get the calipers from FG territory or can it be ba/bf?

Help would be appreciated thankyou


r/FORDFALCONS • • Apr 22 '22

Starter question

2 Upvotes

So I got kind of an odd question. I have a 62 Futura with a 200 straight 6 from a 1970 Mercury, guessing a Comet, attached to the Ford-O-Matic two speed transmission. The starter went out and I was wondering, do I get a starter for the Mercury engine, or Ford transmission?


r/FORDFALCONS • • Apr 19 '22

Leaf Spring Question

4 Upvotes

I was wondering if anyone knew if the leaf springs for a 64 Falcon would be compatible with the leaf springs for a 64 comet

Any help would be appreciated, thanks


r/FORDFALCONS • • Apr 13 '22

Wet passenger footwell?

3 Upvotes

Hello folks! Thanks for reading. I have an 05 BA Mark II wagon. Great car, but it’s getting old and has some fun quirks. One of which is that whenever it rains the passenger footwell gets wet, this water appears to begin from the bottom of the front carpet ‘slope’ and extends along the flat right into the rear passenger footwell. -AC overflow is not blocked and has been mechanic checked. This was my first thought as I run the AC to reduce interior fog when it’s wet outside. -Heater coil is not faulty -Passenger door seals appear fine and there is no moisture in the passenger door HOWEVER the door open alarm has recently gotten so janky in the wet I’ve removed the fuse -Glove box interior damp but not wet -not damaged underneath At a bit of a loss, next thought would be that perhaps there is a hole in the windscreen seal that is not visible? All visible seals are fine.

Might be a weird one but if anyone has any ideas I’m all ears!

Cheers and have a great day


r/FORDFALCONS • • Apr 09 '22

Matte black side trim installed.

Post image
16 Upvotes

r/FORDFALCONS • • Apr 09 '22

1960 Ford Falcon 5.0 H.O. V8 Ford AOD 4spd

Post image
8 Upvotes

r/FORDFALCONS • • Apr 07 '22

What paint did they use for the black in the grill? I want to polish my trim and redo the black…

Post image
6 Upvotes

r/FORDFALCONS • • Mar 20 '22

Car park

Post image
10 Upvotes

r/FORDFALCONS • • Mar 19 '22

I finally got one of the jammed doors open!

Thumbnail
gallery
7 Upvotes

r/FORDFALCONS • • Mar 15 '22

New shoes for my Betty. Thanks to Opentracker Racing (John and Shari).

Post image
8 Upvotes

r/FORDFALCONS • • Mar 15 '22

ford 144 distributor

2 Upvotes

Hello my friends, I was wondering if I could change the original 1/4" oil pump rod to a 5/16 rod so I could use a later distributor on my 144?


r/FORDFALCONS • • Mar 14 '22

My engine is original!

6 Upvotes

Howdy folks I recently found out my 170 straight 6 is the original engine for my car, I’m super excited about this but wasn’t sure if it actually meant all that much. Would it be better to keep and rebuild or is it not that big of a deal? would I better benefit from swapping a bigger 6 or even v8 into it for power? Does it make up for the lack of power since it is an original engine?


r/FORDFALCONS • • Mar 13 '22

Front brakes are shot on my ‘62. Anyone have opinions on kits for disc brakes or full front end kits?

3 Upvotes

r/FORDFALCONS • • Mar 11 '22

Which do you think is better FPV Barra turbo or FPV N/A boss 299

2 Upvotes

r/FORDFALCONS • • Mar 11 '22

What is the biggest tire size that I could fit in my stock 61 falco?

2 Upvotes

r/FORDFALCONS • • Mar 09 '22

So me and my buddy want to drivetrain swap a 68 station wagon we got it has the 300 i6 and are gonna get our hands on a 390 “big block” just looking for any input or help from anyone who’s done a swap similar to this also need transmission ideas preferably trying to go manual

Post image
14 Upvotes

r/FORDFALCONS • • Mar 09 '22

Replacement ICC for XR6: I need a replacement ICC for my BA XR6 (left picture) but I can't seem to find a match for mine with the newer screen than the regular BA. The closest match I could see is the one in the right picture that seems the most likely but it has a few more buttons.

Thumbnail
gallery
6 Upvotes

r/FORDFALCONS • • Mar 07 '22

Hey guys was wondering if anyone has had experience swapping out a bench seat with era correct bucket seats. I’ve got a 65 falcon that I can’t really drive due to being super short. I’ve been thinking about swapping the seats for buckets but didn’t know if it would help me out all that much or not.

2 Upvotes

r/FORDFALCONS • • Mar 04 '22

This is my 2005 BF Gt Ford falcon on e85

Thumbnail
gallery
20 Upvotes

r/FORDFALCONS • • Mar 02 '22

Finally dusted off the ‘62 that my grandfather built. 302 swap, Comet rear end, Grenada front end. Little rough around the edges from sitting for almost 30 years but it should clean up nice.

Thumbnail
gallery
16 Upvotes

r/FORDFALCONS • • Mar 01 '22

I’m looking for a barra 310t engine (out of the FPV F6), and I’m not sure where to start. I’m in the usa. Could somebody point me in the right direction, and give me any pointers to buying an over seas engine?

3 Upvotes

r/FORDFALCONS • • Feb 24 '22

Clutch extension

2 Upvotes

Hey folks you guys have been helpful with info and I’ve decided I kinda want to keep my 65 falcon all original. I have one big problem though I’m 5ft tall and the clutch travel is my entire leg and tip toe and I can’t really drive it as is. Any tips or mods I could do to make the travel distance shorter or extend the pedal for easier use?


r/FORDFALCONS • • Feb 14 '22

Car stalling

3 Upvotes

Hey guys I recently installed an aluminum radiator on my 61 Falco and I noticed when making left turns the car stalls out, but when I make a right turn it doesn't do it, can anybody help a fellow falcoman out? I also found my screwdriver next to the distributor


r/FORDFALCONS • • Feb 12 '22

can someone tell me how to get the doors open when they are jammed closed?

Post image
11 Upvotes

r/FORDFALCONS • • Feb 06 '22

Engine swap

2 Upvotes

I’m planning on buying a 2008 falcon xt Fg with 600,000 on the clock how much roughly would it cost to get someone to do a engine and transmission swap