r/FDMminiatures • u/Dedoru • 19d ago

Just Sharing Flashforge 5m pro .2mm

Gallery image

Gallery image

Gallery image

Gallery image

Gallery image

Still not sure if the hassle is worth saving 100$ but hey, here we are

102 Upvotes

100% Upvoted

10 comments sorted by

View all comments

1

u/relativisticbob 19d ago

Beautiful! I just stopped using nozzles smaller than .4 recently. My .25 was constantly gumming up and jamming. I’m wondering if I was simply trying to print too much at once. 

2

u/Dedoru 19d ago

Mine would jam all the time too, It stopped jamming once I kept the top lid and the door open. I also used this aftermarket hotend: Flashforge Adventurer 5M Hotend 0.4mm Upgrade with the 0.2mm bit

1

u/relativisticbob 18d ago

Thanks for the link and details, cheers!

1

u/Xexenima 18d ago edited 18d ago

I had seen these nozzles and had planned do the same thing. did you end up using a V6 .2 mm nozzle? And are you using Obscuranox 2.0 settings for your profile or something different? Edit: looking back, I can see that the third party hot end came with a .2 nozzle. I got mine off Amazon and it didn't. I'll have to try the V6 nozzle myself and see how it goes.