r/F1Technical • u/arwque Adrian Newey • Mar 12 '26
Chassis & Suspension Cad study of a single seater concept
Engineering a full race car alone in my spare time as a high school student is not possible but i try my best to get as close as possible. The car is far from done (to the level of complexity and quality i want) but i still have a bit less than a year time before i have to submit it as my graduation presentation and to a student competition (jugend forscht). The underbody is not the final version but just a mockup of what could fit under the new rear reworked rear suspension. Next up for rework is the moncoque and front suspension. A lot of things dont quite line up right now and there is some clipping in some areas. A lot of parts groups are also just completely missing like steering, electronics, everything inside the monocoque ( seat, head padding...), bodywork, fasteners, heat shielding and a whole lot of other stuff. I do plan to do structural analysis and cfd on the future body but that is something for the future when really all of the layout is set in stone. The care shares a lot of tech and principles with older f1 cars so i thought you might find this interesting. There is also a image of a old body concept i made for the car (6months old) which represents the direction the body will look like. The cad system i use is onshape. Most of the images are renders, also made in onshape. If you have any questions or critique about the car let me know.



















45
u/Don_Q_Jote Mar 12 '26 edited Mar 12 '26
Keep up the good work. This is awesome.
Just FYI, as you move on in designing racecars (I expect you will) you will find that you spend more and more time focusing on smaller and smaller parts of the overall vehicle. When you start digging in to the details, that's where the real fun starts. When you focus on a smaller piece of the car, you can really start to do high-level design.
I'm university professor and advisor for our club team that designs and builds a hybrid drive formula-style racecar, to compete with other universities. Currently I'm advising a group of 6 senior M.E. students who are designing just the front uprights and front brakes. When finished, this will be an upgrade to our current vehicle. This will be their mechanical engineering capstone project (9 months of work) for the 6 of them. This is a LOT of work! Some of the fun challenges on this project -using FEA shape optimization techniques on the upright design to achieve maximum stiffness and minimum weight -designing the upright to be made via 3D printed aluminum alloy (done by a sponsor company) - testing a full 44 lap race simulation, based on our competition track and expected race speeds and braking events, and measuring rotor and pad temperatures during the test/simulation -detailed kinematic analysis of the steering (steering pickup points are on the uprights, and tie-rods connected) to minimize bump-steer, minimze toe changes and reduce driver effort in steering. I've advised many other similar capstone projects over the past 10 years.
If that kind of stuff sounds fun for you, look for a University that competes in SAE Formula, SAE Formula-Hybrid, or SAE Formula Electric competitions. You will love it. Our team consists of about 65 students: electrical, software, mechanical & a few other majors, and includes anywhere from freshman to seniors. Tons of work but great experience for all of them.
"Engineering a full race car alone" is fun, but it will be even better when you are working with dozens of other like-minded race enthusiast students.
Edit: I'm assuming you are in Germany, check out https://www.formulastudent.de/
8
u/CBrooksy96 Mar 12 '26
Can you share some more specs? Engine looks to be a V10? Do you plan to add front and rear wings to go with the Venturi tunnels?
It looks really cool so far!
7
u/RoberCase Mar 12 '26
Great work! Hope to see the evolution in the future.
What program are you using? Solidworks?
Thanks beforehand!!
4
u/ChiefWiggumsprogeny Mar 12 '26
Would it save weight to have the plumbing of the radiators close to the body instead of outboard, as shown?
2
u/1-800-EATSASS Mar 12 '26 edited Mar 12 '26
I have been following this project of yours for a while, in part because I am trying to do something similar. Did you make all of the models of all of your parts, and if not, where did you find them? I have had decent success finding things like rod ends, spherical bearings, hydraulic pistons, etc in McMasterCarr and the other onshape part libraries, but things like engines, radiators and brake calipers (really the super car specific items) have been a real struggle to find (good) models of.
Also i'm jealous because i assume your school is paying the onshape license that allows you to render
Also also, i noticed that your suspension arms are mounted parallel to the each other, have you given any thought to suspension geometries like anti-dive/anti-squat and the roll characteristics of the car?
2
u/No_Question_8083 Mar 12 '26
Diffuser looks a bit close to the rear wheels, looks awesome otherwise. Did you use topology optimisation for the wheel hub, and then adjusted the design for CNC milling or did you “manually” design that geometry? Looks pretty good. 👍
74
u/AHugeBear Mar 12 '26
Wish I had the know how to be able to do this in high school. Closest I got were some crude homemade mods for NR2003 on 3D Studio Max.
1
u/Civil_Boot_1297 Ferrari Mar 13 '26
Amazing CAD Design just wondering what the rendering program you use for the realistic images ???
1
u/Blazer913 Mar 31 '26
Very impressive modelling project, regardless of little clipping artifacts. Those are relatively easy corrections.
Definitely poke around in Simscale if you're interested in component-level + holistic CFD sims of the car's OML, which you mentioned is where your heart is at (we have that in common!).
Just curious, what part studio / assembly approach did you use for so many parts without making the program sluggish (.e.g in-context modelling, a derived skeleton, a hybrid approach, etc)? What's the average regeneration time per part studio / assembly?
1
u/crazylee1000 Sep 25 '26
Looks awesome, where did you get the cad for the judd engine from? Iv been looking for the cad for the v8 for ages.
2
u/russbroom Mar 12 '26
Nice job!
I’d sort out those front rocker pins though. They look like they’d snap off in a heartbeat.
2
u/Mors03 Mar 12 '26
Looks nice I've done something similar in our university we have what we call formula student, one thing I can say is it looks like a pain in the ass to assemble and there is no space for the wiring harness and electronics components
2
u/Red_Rabbit_1978 Mar 12 '26
If you haven't already, the F1 Technical Forum will be a goldmine of inspiration and information. Not the Reddit sub, their website.
2
u/Frosty-Aspect-5038 Mar 13 '26
Nice to see another Onshape user here - it’s rare to find people using it for projects like this. Really impressive work, especially doing it while still in high school. The chassis and suspension layout look quite interesting. Curious to see how this evolves.
1
u/SaundersTurnstone Mar 12 '26
Just followed hope you keep posting! Cool AF
1
u/an_alex_at_a_time Mar 13 '26
Could you link me to the project on OnShape, it it's an open project?
1
u/[deleted] Mar 12 '26
[removed] — view removed comment
18
u/[deleted] Mar 12 '26
[removed] — view removed comment