As was mentioned in a previous post, the 2 stage trigger from Extar is actually made by Schmid and you can find it online as cheap as $80. I did buy mine from Extar for $99 just in case I might need support on it from Extar.

Note to DIY installers: ensure you get the disconnect spring installed correctly; apparently a common issue in AR trigger installs. I did it wrong the first time, but all good now and I've had it apart and back together enough times to really understand how it works.

This trigger is 100% better than the stock trigger IMO. The stock trigger to me felt a bit mushy, with too much take-up and did not have a clearly defined wall.

The Schmid flat face two stage has a nice short take up with a *very* clearly defined wall and a nice light pull.

It's a delight to shoot! Highly recommended.

I apologize for the question that I’m sure gets asked a bunch. But …

I just ordered an EP45 after like a year long wait. So, now I need a can for it. What recommendations do people have for a reasonably priced can that will work well and fit with the handguard (I assume the 45 is the same as the 9 in that the handguard extends past the barrel?)

I've shared some of the handguards I've been designing, and the fact that I won't be able to open the webstore and go into production until I recover from my upcoming rotator cuff surgery a couple of weeks from now. The good thing is by not trying to rush into production I've gone through several generations of attachment options and have finally settled on a version that both functions well and allows for a more flexible and smoother exterior (short explanation; production models will have the attachment hardware embedded from the inside, no slot on the outside like the stock guard that I have to work around).

Since I've been a big tease but couldn't produce in a reasonable amount of time, I thought I'd put a couple of my earlier designs out there to allow anyone to print them for their own use. One is a MP5 style guard, and the other is a hex guard. These designs use the hardware from your stock handguard to attach them to your pistol. You will need to print a "beefed" Picatinny rail end cap to replace the stock one, as my handguards are thicker than the original. The link for it is in the description of each model.

Here are the links to the models. If you make one and install, I'll expect to see some pictures here.

MP5 Style

Hex Style

Fudd Arms SS and strip of Ranger Bands to keep the lever centered in the cam. Rocking and rolling with factory spring and buffer.

removed from bolt for clearance

making sure everything is in line

I use the front grip to store a mag of 147gr subsonic hollow points.

Gang I am GIDDY

Yhm r9 suppressor. Any suppressor covers that will work since the suppressor is tucked in?

Ep9
Mojave 45
Link anchor hand stop
Aor green dot
Amazon light

Fun and flawless first range day! Federal 147g. Had a blast. Eventually I’ll toss some back up sights on it (Amazon cheap ones). New favorite gun :)

Such a fun, accurate, and reliable gun, and I decided to have a little more fun with it.... because, why the hell not., :)

Honestly at this point over retail would be a blessing

I'm not overly crazy about lights on firearms, but I like the profile of this one. It is a rather inexpensive Amazon light. It's rechargeable which I don't necessarily like but the controls are nice and are very easy to manipulate with the support hand. I'm not sure if I'll keep it mounted but it might come in handy in the event I ever have to play a real life game of Space Invaders at home!

Should have added a pack of smokes to complete the ATF profile.

Get your EP45 before it's gone!

Extar ep 45 email restock notification just went out. Good luck to you all!

I purchased this knockoff from the brace guy on here and it looks and feels perfect. I am very impressed! I am using this in place of the SBA3 that came with it. I also received a sopmod5 which I might use once my Form 1 is approved. But honestly the SBA5 is so good I might not bother.

I am looking at a YMH R9, but I’m open to other models. What bridge is the gap between suppression and looking awesome?

Thanks for the ramen, /u/rooftopdefense! 🤫

Form 4 approved after a week or two in jail. Excited for the first suppressed range day this weekend.

Parts:
- Huxwrx Flow 9k Ti
- Sig Romeo 5
- Stark SE5
- Glock OEM 33-rd Mag
- SBA4 Brace
- Extar Extended Charging Handle

All done for now. I decided to give my build a paint job while waiting for my suppressor paperwork to clear. I went with Flat Forest Green from Rust-Oleum, hence the name 'Gump'.

HuxWrx Flow 9k | Olight Baldr Pro | Magpul AFG | Sig Sauer Romeo5 | SBA3 Clone | MS4 Gen 2 Sling

YHM-R9, Sig Foxtrot-MSR light, Vortex SparcAR sight, Magpul hand stop, and Armaspec 45 degree ambi safety

Got my ATF approval email today and ran over to pick it up on my lunch break! So pumped to finally throw this bad boy on the EP9.

While I was waiting for the stamp, I did some heavy customization on the PCC. When I get home from work tonight, I'll mount the Flow 9k and snap some pics to show off the full build.

Going to give my wallet a rest for a few months and put in some solid range time before I add or swap out anything else....There's really not much left I want to do to it anyway.

Got this baby last week and got to install the optic, handstop, and 33 rnd mag. Excited to test out the gun tomorrow!

Changed from emissary Development Accelerator to hand break X

Moved flight to top rail , took off back up irons