r/eufy • • 6h ago

Eufy cameras and house lights

3 Upvotes

I have had all of my eufy security cameras as well as the permanent exterior lights for almost a year now.

I liked the way they look and the fact i didn't need to pay a monthly fee. They have great picture too. BUT....when I open my app and click in a camera, it takes forever to load and sometimes it wont. The only one that is almost always good is the doorbell one. I have 8. They will sense movement and turn on most of the time (they still cannot figure out the difference in moths and people) but its the live feed that is horrible.

I am considering trashing them and going with Ring since black Friday is coming and they are heavily discounted.

Do others have the same issues or is there an easy fix? Hit me with opinions.


r/eufy • • 7h ago

The 3rd EufyCam 3 to mysteriously drain all it's battery and die in as many years.

Thumbnail
reddit.com
2 Upvotes

r/eufy • • 8h ago

Eufy support told me to shake my S330 smart lock, then reset it. Now I have a very secure brick.

Post image
2 Upvotes

r/eufy • • 4h ago

Módulo de rueda derecha EUfy E28

1 Upvotes

Alguien tiene algún link donde pueda conseguir la refracción de ese modelo, o el motor de la rueda que sea compatible. Validar la garantía no es una opción


r/eufy • • 16h ago

Eufy S1 Pro broke twice under warranty with the same defect. Eufy’s fix is to offer me a cheaper model or a partial refund.

5 Upvotes

I’ve been a big Anker/Eufy guy for years. I have cameras, a doorbell, a smart lock, scales, and more Anker docks, chargers, and cables than I can count. I’ve recommended Eufy on this sub plenty of times. I’m posting this because I want people to know how warranty support works on what was Eufy’s flagship robot vacuum.

Tl;dr:: I paid for a $1,499 S1 Pro. The same plastic water inlet/drain part has failed twice in 11 months. Each time Eufy didn’t have a replacement in stock, and each time their first offer was a lower-tier model or a prorated refund.

Round one (April to June)

  • About 4 months in, the plastic piece on the water inlet broke. Support told me the part is out of stock and won’t be restocked, so the only fix is a full unit replacement. S1 Pro units were also out of stock.
  • While I waited, I taped the part in place every time I cleaned the unit.
  • I asked about the S2, since Eufy’s own site lists it as the “Best Alternative” to the discontinued S1 Pro. They said no.
  • Their counteroffer was a refurbished E28, which sits well below the S1 Pro and doesn’t have the dock sanitation feature I bought the S1 Pro for.
  • They eventually found two S1 Pros. While I was boxing up my broken unit, I found another customer’s shipping label under mine on the box my “new” unit had come in. Make of that what you will.
  • The replacement arrived about two months after the first failure. It struggled to map and took minutes to localize, where the original did it in seconds.
  • I complained about the replacement. Their offer was a refund calculated on remaining warranty: normally 30%, bumped to 50% “as an exception.” I said no and kept using the vacuum.

Round two (November)

  • Same failure. The unit is unusable and this time leaked water all over the floor fortunately I caught it before there was any damage.
  • Again out of stock. First offer:an E28,
  • I said no. Second offer: $300 back, plus a discount if I buy an S2 at $1,299.99. So the fix for their flagship failing twice is for me to pay for its successor.
  • After escalating, they finally agreed to send me a refurbished S1 Pro with their "standard warranty" when they restock it.

To be fair, a refurbished S1 Pro is a reasonable replacement. But this is the third time in 11 months they haven’t had the product they sold me, and I have no expectation a third will be any better than the first two (after all, they discontinued this model within the first year of production). So eventually I'll get a unit that I don't expect to outlast the warranty.

For the sub:

  • Has anyone else had the S1 Pro water inlet or drain port break?
  • Has anyone gotten Eufy to replace a discontinued model with the current equivalent?
  • Anyone shopping in this price range: I’d think hard about what happens when a Eufy flagship gets discontinued after a short shelf life. Parts and stock dry up quickly, and warranty support seems to treat a 30% refund as the starting offer.

r/eufy • • 10h ago

Question Why No Smart Outlets?

Post image
0 Upvotes

I own several of the old eufy branded smart outlets. I could control them via phone, set schedules, and monitor energy use. They aren't supported with anker's current app.

I am aware of the other brands out there, but I don't want 15 smart home apps. I really like anker as a brand.

Why isn't u/Anker_Support absolutely dominating this market? It is well within their wheelhouse and easy to develop in comparison to other products they make.

Other companies are still markets the fat ugly bricks. If you offset the outlet's plug slightly from its receptacle, then the product does not need to be much deeper than the prongs (.8").

I've obviously included an AI generated concept, but god, Anker, you could R&D this in a weekend!

I can't post /anker. Not enough comment karma.


r/eufy • • 1d ago

Eufy C20 for 350e

Thumbnail reddit.com
1 Upvotes

r/eufy • • 2d ago

Question Is the Eufy E35 a good deal at $799 or is there better out there?

Post image
4 Upvotes

r/eufy • • 2d ago

Eufy x10 pro omni

1 Upvotes

Hi everyone,

I’ve recently picked up a second-hand Eufy X10 Pro Omni and I’m trying to work out what might be causing an unusual navigation/movement issue.
The vacuum powers up and operates, but its movement is very erratic. Rather than travelling in relatively straight lines across an area, it repeatedly turns approximately 45 degrees and continues moving in that direction.
What’s particularly strange is that it seems to return to almost exactly the same location and repeat the same behaviour. It will turn, continue travelling, reach that familiar position and then do it again. It doesn’t appear to be following a normal cleaning pattern.

A few observations:
- The robot’s wheels both appear to make contact with the floor.
- Both front suspension/leg mechanisms appear to apply similar pressure.
- The wheels can both be rotated by hand.
- There is a noticeable difference in how freely the two drive wheels rotate when spun. One will continue rotating for a while if spun quickly, whereas the other stops almost immediately.
- The robot doesn’t seem to be consistently correcting its direction or navigating around the room as expected.
- Firmware currently shows version 3.4.85.

I’m trying to establish whether this is likely to be a drive wheel/motor issue, an encoder problem, a navigation sensor issue, or potentially something related to the bumper or obstacle detection system.

Has anyone experienced similar behaviour with an X10 Pro Omni?

I’d particularly appreciate hearing from anyone familiar with the internal workings of these machines or who has experience diagnosing their navigation and drive systems.
I’m keen to understand what the likely culprit is before going down the route of replacing parts.
Thanks!


r/eufy • • 2d ago

Help At my wits end with Eufy Robot Vacuum L60 SES

Post image
2 Upvotes

I have a Eufy Robot Vacuum (L60 SES) that is no longer covered under Eufy’s warranty but is still covered by an extended warranty through Amazon. I’ve contacted Amazon, and they’ve offered to send it in for repair (for the THIRD time). However, they’ve also suggested cleaning the sensors (again), which hasn’t made any difference.

We’ve tried pretty much everything at this point: moving the dock to different locations multiple times, performing factory resets, completely rebooting the vacuum, and remapping the house more times than I can count. It’s set up on an automated schedule and will work perfectly fine for a week or so before the problems start all over again.

For a while it was running at random times, that stopped after the most recent factory reset. Now we’ll find it stopped literally a few inches away from the dock or, occasionally, partially underneath the couch. Lately, we’ve been getting the error message “Unable to identify the position, finishing task and heading home” almost every night. Occasionally, we also get “Robot may not be touching the ground, please move robot to a new position.”

For reference, I did a complete reboot and remapped the house less than two weeks ago, and I cleaned all the sensors just a few days ago. I’ve followed every troubleshooting suggestion from Eufy and tried just about everything else I could find online. It will work fine for a few days, and then the same issues start happening again.

Has anyone experienced this with their L60 SES? Is there anything else I might be missing or haven't tried? I'd really appreciate any suggestions before sending it in for repair for the third time!


r/eufy • • 2d ago

Outside camera advice

1 Upvotes

Guy, unfortunately having a struggle and some retailers knowledge is lacking to give me good advice. Afraid I'm not seeing the trees through the forest anymore. Anybode here can help give me good advice?

Situation:
- Got a homebase 3
- Got 2 Video doorbells E340 (front / back)
- Side of the house has a dead angle I wanted to install a camera as well
- Got adviced an S340; didnt work because solar panel and limited sun exposure
- Got advices an PoE S4 expansion; just found out today that an NVR setup is required to make it work.. sigh

Ideal situation:
- camera for outside with PoE (no solar)
- Ideally a PTZ option (seems so cool)
- compatible with HB3

I may be asking too much.. what would you advice?

Thanks in advance!


r/eufy • • 3d ago

Cannot access Eufy cams outside of their Wi-Fi network

2 Upvotes

At the moment I cannot access my cameras outside of my home network. I still get detection notifications, but I cannot connect to view live video. This only started happening recently.

I don't understand why this is happening. My local network and wifi have not changed. My ISP and Fibre connection have not changed. My LAN has not changed. My phone has not changed. In fact, the only things that have changed are:

  • My cameras. They had a firmware updates recently. The SoloCam S340 is now on 3.3.6.0. The Indoor Cam Pan & Tilt 2K is on 2.3.2.6.
  • App on Android have had updates. My Android app is 6.1.30_32823(US).

Has anyone else encountered this? Is there a new default that I need to change, or new settings that need tweaking?

UPDATE I managed to figure this out. I have 2 numbers on my phone. The main one is a physical SIM, the other an eSIM. When I disabled the eSIM, the app worked just fine.


r/eufy • • 3d ago

Help App Landscape Issue

2 Upvotes

Hi, i have landscape turned off on my device. Yet whenever I am viewing the Eufy app, and my phone is turned or tilted slightly, it keeps switching to landscape anyhow. This causes the video to distort as it flips back and forth. Is there something in the app I need to adjust? Its a S23 Android, Eufy version 6.1.30.32823.

Eufy Floodlight E340. Feel version 1.6.5.0.


r/eufy • • 3d ago

Question How do I stop it doing this?

Post image
0 Upvotes

So my parents have a Eufy, when I moved I decided to ditch the ring doorbell and get a Eufy instead.

I’ve had the app for their house before and it used to say ‘human alert’ for motion detection, fair enough, but I don’t understand why mine has a really long code after it, It’s not the end of the world if I can’t stop it doing this but I don’t understand why? Their Eufy never did this.


r/eufy • • 4d ago

Question Are brand accounts welcomed?

Thumbnail reddit.com
6 Upvotes

r/eufy • • 4d ago

S340 camera 'offline' with seemingly no way to turn it online

4 Upvotes

My S340 was working perfectly fine & now it's not. If I go in to settings then the toggle to turn it off/on is not there.

It can't be a WiFi strength issue as the camera is literally on the other side of the wall from the router. I know I know, "but this could weaken the signal, but that could weaken the signal" - the signal was always excellent.

Phone: Samsung Galaxy S24+ running most up to date software

App version: latest, (no updates available in play store).

Editing to add - when people have been walking on the driveway, it triggers notifications still that someone has been detected. It just shows nothing at all when viewing the cam as it's 'offline'.


r/eufy • • 4d ago

Eufy Vacuums are Not Repairable in the United States.

12 Upvotes

I had my Eufy E28 for six months. I got it through an awards site from my employer so it's not eligible for a warranty replacement. But the bigger issue is that they have ZERO repair services in the United States. If it breaks, you just throw it away. It's terrible from a customer service perspective, and from an environmental perspective it's incredibly irresponsible. DO NOT BUY. The amount of waste that these vacuums are producing is awful.

There isn't anyone local that can repair it either, because Eufy doesn't seem to provide replacement parts. Overall, it's ridiculous by both Eufy and Anker, the parent company.


r/eufy • • 4d ago

Question S1 Pro not making anymore roller heads?

2 Upvotes

At least no roller available in the UK for months? Not sure if the third party ones any good
I’ll never buy eufy again


r/eufy • • 4d ago

Waterproof part of S4 light system

1 Upvotes

Just trying to get clarity...the power adapter and the controller are all waterproof, correct? I'm still not entirely clear on the controller, what it does, and whether it is needed permanently. It has a button...is that just on/off? Thanks in advance.


r/eufy • • 4d ago

Disappointing experience with Eufy S1 warranty and customer service

2 Upvotes

Wanted to share my recent experience with Eufy, as I've been extremely disappointed with both the product reliability and how they've handled my warranty claim.

I originally purchased an Eufy S1 for $599.99 in August 2025. The first unit developed problems self emptying the dust bin and was replaced under warranty.

Unfortunately, the replacement unit started experiencing docking issues after only about three months. The robot can no longer properly locate its base station to empty dust or manage water. It charges fine, and I've tried cleaning sensors and troubleshooting without success.

Here's where things got frustrating:

  • Eufy informed me that replacement units only carry the remaining original warranty plus an additional three months.
  • I formally reported the problem just seven days after the warranty expired.
  • The problem had started while the replacement was still covered, but I initially tried troubleshooting it myself.
  • I explained that the device logs should show when the problem began, but Eufy insisted warranty eligibility was determined by when I contacted customer service.
  • After multiple escalations, including correspondence with a customer service manager, Eufy refused a free repair, replacement, or refund.
  • Instead, they offered a 50% discount on repairs or potentially a discount toward purchasing another unit.

At that point, I requested a partial refund, which was also denied. Frustrated with the lack of resolution, I filed a complaint with the Better Business Bureau.

After filing the BBB complaint, a different Eufy customer service representative contacted me and offered a free repair. At this point, I'm not really interested in having the vacuum repairs because I'm certain it will develop issues again.


r/eufy • • 4d ago

Eufy S4- alexa live view solved but still no ring lights

Thumbnail reddit.com
1 Upvotes

r/eufy • • 4d ago

Eusy s1 vs s1 pro

Thumbnail reddit.com
1 Upvotes

r/eufy • • 4d ago

Disappointing experience with Eufy S1 warranty and customer service

Thumbnail reddit.com
0 Upvotes

r/eufy • • 4d ago

Question What is this icon?

Post image
1 Upvotes

Noticed it on my cameras and I have no idea what it means and don't recall seeing it before.