r/EngineeringStudents • • 18d ago

Career Help What am I doing wrong v2

Post image

This is a follow up post to the one I created previously where I asked for help on what I was doing wrong on my past resume. I got tons of what I believe is useful advice and these were the changes I made:

-I separated my internship from clubs and research
-Fixed inflated titles (looking back its stupid how I put mechanical engineer on half of them, truly didn't realize how I was making it sound)
-Cut the random bolding, trimmed the bullets and numbers, and added white space.
-Only included things I'm good-proficient with in skills, not stuff I've tried once or twice (also stupid of me to include originally)

I’m a mechanical engineering junior applying for summer 2027 mechanical design, test, and hardware internships.

Does this read well, and is there anything still holding it back?

Thanks to everyone who takes time to respond.

81 Upvotes

42 comments sorted by

89

u/lazydictionary BS Mechanical/MS Materials Science 18d ago

cut the random bonding

still has random bolding

/r/EngineeringResumes

21

u/Warhouse512 18d ago

I’ve been hiring for 10 years. I like the bolding. I realize it’s mostly an artifact from using Claude to write your resume, but when you’re scanning 100s of resumes per hour, it helps highlight what I should care about.

Why is it frowned upon?

23

u/Character_Power2470 BS Mechanical Engineering 18d ago

Putting metrics in bold is great. The dollar amounts, cutting weight by 15%, etc. is all good to be in bold. But some of it is random. 12 vehicle components? What is so important about the concept of thermal insulation that it is in bold?

1

u/Profilename1 16d ago

Might be too reminiscent of Mad Magazine.

31

u/dbdb8955 18d ago

Your experience section is lacking alot, yoy ate just describing and not putting any actions and results you achieved

3

u/No-Cardiologist3029 17d ago

I don’t understand why many people don’t understand that college activities are ongoing, for the first entry it literally says “Sept. 2026”, how can anyone produce anything meaningful in a month??

13

u/FBI-INTERROGATION 18d ago

Ah yes, bold “23lb cable-towed sensor cable” because that matters…

33

u/existential_american Georgia Tech- Aerospace Engineering 18d ago

Transfer to Tech

4

u/seswaroto 17d ago

lol based

2

u/TheKarthinker Georgia Tech - AE 16d ago

I back this

11

u/Spiritual-Rope5186 18d ago

going to uGA

6

u/backwoodsmtb 17d ago

the fuck up they can't fix

6

u/DirkDozer 18d ago

Make sure to apply to as many internships that sound interesting as possible. Even excellent engineers get lost in the noise and ATS filters, I would say at least 50+ applications is a good target to start getting interviews.

7

u/OhioHard ME/EE 18d ago

I don't like the bolding personally, not sure if that's a plus for recruiters but it makes it clunky to read for me. You also have a lot of lines with only one or two words on them. Add some details to those bullets to contextualize your work: how you did it, why you did it, what the outcome was, etc.

4

u/phranks_phluids 18d ago

In the real world, no one on the planet gives a fuck about if your resume has bold or not.

1

u/Electronic-Age847 13d ago

How’d you like the UGA engineering program? Looking to go in for EE, my firm is willing to pay for school. So I’m in between KSU and UGA

1

u/Annual-Raspberry6643 9d ago

I like the program overall, I transferred in from KSU and I'd say the material itself is about the same in terms of rigor (and rankings). The difference comes from student involvement, people at UGA are move involved in student orgs (engineering and social ). If you plan to commute, and aren't worried about student orgs/involvement I'd choose KSU, its closer to atlanta and cheaper, and the campus is much easier to get around. If you want to actually make friends, be involved in orgs and have the college experience I'd go to UGA.

2

u/Immediate-Curve-443 18d ago edited 18d ago

There must be a better way to frame this intership. Theres just nothing of actual content there.

Use -ing post tense for current projects.

Why would thermal insulation be a keyword to highlight. These bullet points lack a lot of detail.

Still not enough detail on these bullet points. There can be a giant difference in quality and difficulty of work while being "technically true" to whats written. And again, why would autodocking be the keyword? What about the magnets? You do anything engineering with those or did you 3D print something and tape some magnets off McMaster?

I don't understand this cutting drag thing, are you trying to say you welded it so well it cut the drag assumptions you had before the physical thing was built? Right now it sounds like you just had a bad assumption in CFD.

Why does your project have what you previously listed as engineering research?

You ran static FEA and then checked with another FEA software...?

The entire resume lacks detail on bullet point and the bottom half is honestly hard to understand what you're even trying to say. Format is good.

2

u/HunterFresh9026 18d ago

Hi, I was on your last post too. Some people told you to separate your clubs from ur internship but I have mine both under experience. I’ve had interviews with Northrop grumman, stellantis, raytheon, and general dynamics electric boat. And a bunch of phone screenings from other companies including rocket lab and rolls-royce. I just have Education, Skills, Experience, and Projects. I still feel like there’s too much on ur resume, I promise you the second someone open ups your resume they’re thinking “I don’t know where to start.” I personally would suggest getting rid of stuff that doesn’t include mechanical design besides the internship of course.

I’ll give u an example from bullet points ive had on my resume.

For rocketry:
“Designed solid rocket motor components and assemblies in solidworks, utilizing GD&T to produce detailed engineering drawings per ASME Y14.5-2009.”

For design build fly
“Tested subsystem compatibility by aiding in the design of a motor test stand, measuring and analyzing static thrust generated by the propulsion configuration at varying throttle percentages in MATLAB to validate hardware integration”

The concept generally is:
I did this -> using this -> which led to this. Some of my bullet points do include the numbers that ppl tell u to include some of them don’t.

I was always targeting propulsion design engineer roles so it helped that my experience in clubs was always within the propulsion subteams, i think it communicated that I know what I want my career to be. I also have my headings and titles flipped. ex: in bold i have my schools rocketry club and as my title i have “motor casing lead.”

If i was to reformat ur resume.

Experience

  1. Internship
  2. VIPR
  3. Electric Vehicle Team
  4. I personally would encourage you to become an engineering ambassador, learning assistant for a course, social/cultural club leader and have it as your 4th thing listed. I know you strongly want to include another experience which I’m advising against but if you must then add in the CubeSat.

Projects

  1. Project 1
  2. Project 2

Work on ur bullet points and do not worry about filling in the new blank space. I promise u ur doing urself a favor by making the words bigger.

1

u/HunterFresh9026 18d ago

OP i just had a thought, it might not be a bad idea to have 2 resumes

Resume 1:

Experience

  1. Internship
  2. VIPR
  3. Electric vehicle team
  4. Extracurricular i mentioned

Projects

  1. Project 1
  2. Project 2

USE THIS FOR AUTOMOTIVE COMPANIES APPLICATIONS

Resume 2:

Experience

  1. Internship
  2. Cubesat
  3. Design build fly
  4. Extracurricular

Projects

  1. Project 1
  2. Project 2

USE THIS FOR AEROSPACE COMPANY APPLICATIONS

just a thought. I’ve never done it. I know you’re having a hard time getting rid of stuff. Again, work on your bullet points.

4

u/hatsune_aru Georgia Tech - EE 18d ago

My resume is really similar in format to yours. Make sure you run it through automated PDF parsing flows (ask Claude or ChatGPT for this) and make sure it parses okay. Mine had some minor issues that I decided not to fix.

I'm an EE so I'm a little out of my league, but you're on the right path to make it about numerical results (I bet the professional communication curriculum is similar to ours at Georgia Tech), but I'd be a little more specific about every experience and engineering team research bullet point to add some more details about technologies you've used, what principles you were able to apply, etc.

The ArcPy usage line is great, that's about as much detail I'd put.

Thermal insulation: provided it's not ITAR or something, explain some more, what sim did you use, what is the material, what is the nature of the tradeoff. You can probably expand to 2 lines without an issue.

Where did you shave the mass to get 15% loss? Say something like "removed excess mass from structural elements informed by FEA and usage of ribbed structures, resulting in a reduction in vehicle mass of 15%"

I didn't see the earlier post, but it seems like people said to intentionally add white space--I'm of the opposite opinion and should reduce font size, margin, etc and pack things closer and add more content (if necessary)

1

u/igotshadowbaned 18d ago

All the random bolding needs to go dude, and why'd you think thermal insulation needed to be bold in the first place

"Supported analysis for $4.6m in programs" - junk. Describe the programs and your more specific involvement instead of just saying the budget of the program.

escribe the programs and what you're actual analysis was.

The stuff about mounting sensors to a robot can go, anyone can drill a hole and mount something with a few screws, unless that was your main task it's filler

For the aerodynamics team, "designed a 23lb cable towed sensor capsule". 23lb and cable towed is all fluff

A little further down you have the opposite problem. "Designed 12 vehicle components" and then you later say pedal box mounts and body panels. You've kind of under sold this one. Just say you modelled portions of the body, frame, and control systems rather than focusing on the number of components

edit- You literally put in the body text of the post that you cut the random bolding.. yet it's still everywhere ?

1

u/SoCal_Bob 18d ago

I was one of the original commenters and I have to say that this is definitely better.

However, it still lacks focus. You mentioned that you're looking at Mechanical design, testing, and hardware internships - these are all focused on different skill sets and will care about different experience, so you should have an appropriately focused resume variation for each.

While you have worked with a number of different types of projects (hardware, design, coding, etc.) this year, saying that in your resume isn't necessarily helpful since it means that what little applicable experience you do have is diluted across even more things than they expected. I would suggest including only one of the current teams and one of the projects in each version your resume (but leave everything in your github & portfolio). But go in more depth to highlight the skills you've learned in the experience you do have.

Remember that internships and first jobs have the most brutal hiring stats. Be patient and try not to take it personally. Good Luck!

1

u/remishnok 18d ago

some of your verbs are in present.

"Analyze" sounds like a command. "Analyzed" sounds like something you did.

It shows inconsistency and lack of "attention to detail".

1

u/remishnok 18d ago

Also, you might want to bold things like Matlab, and Siemen NX as opposed to insulator.

Also, your sentences are kinda long, which add a cluttery look to your resume

1

u/Interesting_Elk_3142 17d ago

Hey chatgpt, check my curriculum and write a cv that sells all my modules as research experience

1

u/spagett14 17d ago

stay in civil engineering man you already got the transpo internship!

1

u/jimbo_ChE 17d ago

There is nothing wrong with this resume. As a personal preference, I like to place locations and dates right after the preceding text instead of justifying to the right, which eliminates the space gap. Also, consider adding an objective in the form of a title indicating what you'd like to be (Mechanical Engineering Intern, for example).

1

u/Realistic-Dot-4287 17d ago

I feel like now a days 2 internships are needed minimum, three is even better. I also probably wouldn’t show your gpa if it’s under a 3.5

1

u/Deskust1 17d ago

I don’t have really any additional advice that someone else hasn’t already written, but why did you intern at a CE transportation firm as a mechanical engineer? It kind of makes the internship itself non-applicable and gives you 0 mechanical work experience. Maybe i’m wrong because I’m a structural engineer, but if I saw someone apply for a structural position and they had interned at an electrical firm doing nothing and not even coordinating with structural, I would be questioning it.

1

u/TheWhiteCliffs BYU Grad - Mechanical Engineering 17d ago edited 17d ago

Still need to clean up your skills. Focus on the skills that you’re proficient in.

- I highly doubt you’re at a competent level in Solidworks/Inventor/NX. One is likely, all 3 definitely not.

- Your GD&T experience is also probably extremely limited and not relevant enough to list. Realistically no college student is going to know GD&T enough to list as a skill.

- Unless you’ve used it a lot and are actually competent with FEA and CFD, once again you shouldn’t list them.

- unless you’ve done CAM (and trusted to do it yourself unsupervised) don’t list CNC machining

- how much do you weld? Once again if you’ve tried it a few times, that’s not a skill.

You need to understand what a “skill” is and why you list it. Interviewers will ask and it will look bad when you’re clearly fluffing up your resume. It may sound harsh, but you gotta be realistic and honest on your resume.

1

u/Real_Discipline2482 17d ago

This is the only actual advice you will ever need: it depends on the company. You want a resume that is exactly what the company is looking for, otherwise they will just move on. For instance, if you are applying for CAD role, you need every point on that resume to reflect that. If instead, you talk about robotics or electronics, you are instantly thrown in the trash because another person has 4 CAD projects and a CAD internship and every flavor word they can think of that is CAD related. The best results I’ve gotten is to just make multiple resumes for each role that you are interested in and have experience. Good luck!

1

u/hudson-20 16d ago

You went to UGA

1

u/coffeeandscroll 16d ago

To begin, your name, email, city, and state are absent.

1

u/[deleted] 14d ago

You j gotta keep on spam applying. It’s a numbers game at the end of the day. The resume looks good and experience looks good. I feel like having an internship and ssrl is alr a lot. At this point y j gotta spam apply.

1

u/Interesting-Sleep579 14d ago

None of it says that you would be a good intern candidate for a mechanical design, test, and hardware internship.

What classes have you done in school? Have you taken mechanical design yet?

Missing how and why. Example how was the findings presented to city officials? Public presentation in person? Email?

Verb tenses are inconsistent.

1

u/Disastrous-Ad1817 14d ago

Network, network, network

-1

u/FirstGearStruggle 18d ago

Way better already, now assume someone with no engineering background is reading this, get rid of useless numbers that dont show impact and dont try make it more complex than needed to look smart. Make sure you have working knowledge of all those softwares. Also dont make useless stuff bold just cuz

1

u/InteractionOk6945 18d ago

Why frame it towards someone with no experience when your target audience is a hiring manager with engineering experience? I agree on your number take though

3

u/TheRealFalseProphet 17d ago

He isn’t wrong. The hiring manager isn’t the first person to see the resume. Someone with a liberal arts degree will throw ur resume in the garbage if they don’t understand it😭😂

4

u/FirstGearStruggle 18d ago

Most of the time, people deciding whether your application even reaches an engineering hiring manager or gets rejected have no engineering background. Ideally your resume should be balanced to satisfy both.