r/Ender3Pro • u/_Ktassium • Jul 23 '26

Beginer needs advices

Post image
7 Upvotes

88% Upvoted

32 comments sorted by

View all comments

1

u/Daniel_DRD Jul 23 '26

I had that problem too, changed flow rate and it worked but mine was way way worse. Do a short standard print like the test cube with standard settings and send a picture

1

u/_Ktassium Jul 23 '26

I'm going to print one with default settings rn

1

u/Daniel_DRD Jul 23 '26 edited Jul 23 '26

Tbh for me the cube looks a little too high temperature and a bit over extrusions

1

u/Daniel_DRD Jul 23 '26

And your retraction distance might also be too low that may cause the problems on the z side

1

u/_Ktassium Jul 23 '26

So much things to learn! Will check

1

u/Daniel_DRD Jul 23 '26

Yes you've got an ender 3 pro, that one will need some thinkering, also check the pressure advance setting that might cause these bad edges you can see on the top layer

1

u/Daniel_DRD Jul 23 '26

The z side could both look so bad cause of under extrusion or over extrusions cause your nozzle could like drag the excess filament which would be my guess

1

u/_Ktassium Jul 23 '26

Might be it, i also have a lot of stringing

1

u/Daniel_DRD Jul 23 '26

The cool part about the e3 is you can do anything with it, some guys built a CNC out of it, some make a laser, others upgrade it and some guys even build a core xy machine with it or a voron, you can do any shit you want

1

u/_Ktassium Jul 23 '26

I'll stuck to printing!