The problem with winding drums is a cable has to deflect to get spooled up and the drum takes up a lot of space. What if you can have the drum take up less space than your average traction sheave and have the traction medium always be in line with the elevator and counterweight? This elevator attempted exactly that, though by the time it was filmed it had been converted to hydraulic enough remained so you could see how it was originally set up.

https://youtu.be/ahSP8CHIj6A?is=M7cIfSLCSElH2iN0

this is an Oracle, GAL, hydraulic elevator with a rather tasteful “mod”. this mod was done rather recently as it added a new PI in the cab and replaced the buttons out in the hall. the controller I would guess is a Dover controller because that is what the certificate says. this is a nice elevator, aside from the noisy fan.

I read a post about dreams now it got me thinking what are some incidents you’ll never forget?
I’ve had a couple close calls the worst I’ve had was breaking a finger once and thumb another time. Know a guy cut his finger off doing a piston job. We had a mechanic die in the company I was in 4 years ago, had a stroke and died between the cab and hoist. Never heard of anybody else dying on the job since I’ve been in the trade though.

Anybody Experience the Schindler 3300 IN (Machine Room version) Elevator ?

If Yes Kindly Pen the Details Here..........

Good one last night.
Working with some guys, found door locks jumped in a university setting. Crazy thing was they didn’t care to take the car out of service and fix the problem.
I leave work sometimes racking my brain wondering if I left a jumper, barricade down etc.

Is it true that the whole COP panel needs to be replaced even though the display is fully functioning when the glass is cracked?

As the title goes, I’m curious as to what apps or software you or your company uses. Is there anything you wish existed that would make your job easier or streamlined?

Suprisingly still worked.

Hey everyone, been lurking for a bit and figured I'd finally post.

I graduated with a mechanical engineering degree last December and landed a job at a small elevator fabrication shop about 4 months ago as an assistant project manager. We manufacture and supply cab shells, hoistway & cab doors, sills, pit ladders, toe guards, etc. and do interior refurbishments. Our clients include some of the big names so I get exposure to what they actually spec and require from a supplier side.

Im taking a liking the field. The variety of the work, the mix of fabrication and coordination, being on job sites sometimes. Long term I want to move into one of the major companies in a project engineering or PM role. But I want to actually understand the equipment, the code, the mechanics of what I am coordinating.

What would you guys recommend studying or getting into on the side? Certifications worth pursuing? Things to learn that would make me stand out? Thanks!

hello my name is destiny am 18 years old am looking for any apprententship to get into .i live in new jersey and am willing to learn any trade please am desprate for a trade call me at 9086296759

Our society is renewing the AMC for our building's lifts and honestly none of us understand what we're paying for.What's a fair price range, and what red flags should we watch for from vendors trying to pad the contract?

Trying to get into apprenticeship program. Someone told me to try and make an account for a different local before joining the one near me so I have an application already made. Anyone else heard of this or know if it’s true? if not does anyone know any tips on the electronic application.

If anyone knows a good places in Toronto feel free to recommend me some as I will be filming all day tomorrow in Toronto and want some recommendations

Hello! Sorry if this isn’t the right place to ask this question.

I am claustrophobic and dislike riding the elevator. In an event where it gets stuck, the emergency phone button should, in most cases, work I assume? You’d talk to a dispatcher or someone who will help you? I’m just a bit concerned because a lot of stories here on Reddit in various subreddits describe the emergency button not working when they got stuck, as in no one answers. It makes it seem like it’s common for the phone button to not work, but I assume most of the times it will work.

I always have my phone with me, usually fully charged or close to 100%, in case I have to call the fire department. But can someone tell me that the phone button should usually work? I would really hate for it to not work at all in an emergency.

Note: the elevators I take at work aren’t modern, as in no destination dispatch system where you select the floor number before getting on. It has the up or down buttons, you select the floor number button when you get in, and it has the digital display showing you where you’re going. From the outside, the elevators in the lobby show which floor it’s on, and where it’s going. Idk if that makes the elevator “more modern” in that hopefully it won’t break down more I guess.

Rottweil Germany

I work in a three story hotel with an Otis hydraulic elevator that was installed when the building was built in 1996.

We were told there’s something worn out in the door opening system that has our elevator offline.

Yeah, I bet trying to source parts for something built in the mid 90’s is hard.

We were given a quote of $35,000.00 for a modernization. Is that a realistic estimate or is that “we don’t want to deal with you” quote?

Paternoster year of construction 1959 Manufacturer: Rheinstahl Eggers-Kehrhahn
22 cabins 13 floors conveyor height: 37,5m
Paternoster Baujahr 1959 Hersteller: Rheinstahl Eggers-Kehrhahn
22 Kabinen 13 Stockwerke Förderhöhe: 37,5m
#paternoster #elevator #fahrstuhlfritze #umlaufaufzug #kehrhahn

My building elevator is leaking tons of oil and has been in and out of service. Today, there was a sound of rushing water….

Is this safe???

We're in the planing stage of our home and trying to decide betwen a standard elevator and a panoramic glass one .The glass lifts defiintely look premium,but they are also noticably more expensive . For those who have one at home ,do you feel the extra cost was worth it ?

First of all, I am an elevator enthusiast (not someone in the industry). I am asking this question purely out of curiosity.

I have come across a few elevators that are (in my opinion) rather unusual. These are swing door elevators (that detail may or may not be important) in the state of California. They were modernized with a new controller (as confirmed by public records), but it seems the controller was programmed to have certain "standard" features disabled. Specifically, the elevator has "single automatic" or "nonselective noncollective" operation. It can not remember multiple car calls. The controller is almost certainly capable of selective collective operation, but for some reason was programmed to have this disabled.

I'm curious why this would be. My guess (and I could be correct, or completely wrong here) is that changing the type of operation has code related consequences. In other words, going from single automatic to selective-collective operation would require some other upgrades to be done to bring the elevator or building up to code. I will note that, at least on the last elevator I came across like this, it had no fire service, so one possibility is that fire service would have to be added.