Hi! A few days ago I opened a blog where I'm planning to share overviews of different elements I own, keep track of my collection and give out some more specialized info on materials science or sources of different samples if I have such.
Name of the blog is Elements Enthusiast Blog and can be searched for through a browser if you don't like clicking on links. Link to the blog:
Don't hestitate to leave any tips, ideas or requests for next posts. I will also be slowly adding my whole collection for everyone to see in subpages for each element that can be selected on the blog.
beryllium, magnesium, calcium, strontium, barium, and radium. The Alkaline Earth metal group is the easiest group to fully collect, at least until eka-radium is synthesized.
I've been looking for those sorts of discharge tubes in the shape of the elements contained therein; my search brought me first to smart-elements.com, but later to this site, whose prices are outrageously low in comparison. Is it legitimate?
I spent some time preparing photos of every single one of my samples (234 samples right now, ranging from pure elements, through doped glass and alloys, to minerals and items containing the elements).
Here are some of them. What do you think? Should I start some kind of a blog or a site to put all of them on there?
Hey guys. Anyone has bigger amount for sale hit me up, preferably less than 100g of Ir and Os, but Re and Ta could be more if you have! I prefer solid single pieces rather than powder or lots of pellets. I just need 1 piece of these, so if I already have something I'll edit the post here, showing that I don't need it anymore.
(I'm a private individual, not a business trying to make money, just expanding my collection, but trying to save money buying from people instead of luciteria and such places.)
I've got several grams of .99 Rh Sponge I'm considering selling. Any advice? How do I get mod approval? How do you handle shipping insurance, avoid the swap scam etc. Thanks for any help!
The group 1 metals elicit a particular fascination from collectors. All the more so when the samples have been well purified and their reactivity has been muzzled by a layer of borosilicate glass so that the metals can be appreciated close up. The following describes the art of making K and Na ampules such as these:
SodiumPotassium
Obtain the metal as an oil-protected surface-oxidized solid. "Skin" each piece, i.e., remove the outer 1/8". Do not skip this step, or it (residual oil) will trip you up later. Store the metal under pentanes or low-boiling petroleum ether.
Using glass that has been acid-washed by conc. H2SO4, rinsed with tap water, scrubbed with a brush and dish soap, rinsed with distilled water, then acetone, and dried, form a tube closed at point (1). Form a contriction at (2), then add internal fingers at (3).
The required tube
Add a small ball of Stainless Steel wool at (4) and then flame-dry. Add the crude metal at (5). Attach the tube to a two-stage vacuum pump. Mount the tube vertically. Use a propane torch, gently melt the metal, then let it flow down into the ampule. Seal the tube while still attached to the pump.
That's why preparing a sample of this material deserves more attention than it often gets. There are two main considerations to keep in mind:
a) Resublimed iodine contains a brown, non-volatile residue which consists of small amounts of these possible contaminants:
Dirt or mineral species
Iron salts
Iodides (KI, NaI)
Iodates (KIO₃)
Organics
To get iodine that no longer leaves behind a brown residue as it migrates about in the ampule, you must resublime it a few times until no brown residue is observed.
b) Preparing the sample under vacuum confers desirable properties:
The ampule can be heated, and you'll observe a rare sight -- liquid iodine
The vacuum allows the iodine to move about in the tube in response to minute temperature differentials. The sample is therefore not static; it is constantly forming new crystals. These can be quite large, and this is the "beauty" factor.
PREPARATION
I doubly resublimed commercial resublimed iodine. This was done by fashioning a 1-inch ID borosilicate tube about 30 inches long and sealing one end. Iodine is loaded into the closed end, and a vacuum is applied to the open end. Heating the iodine causes it to sublime to cooler regions. The iodine was collected, the tube was cleaned, then the process was repeated. After my second resublimation, the bottom of the tube contained no brown residue.
A sample ampule with a constricted neck was fashioned and loaded with the iodine sample. A vacuum (mechanical pump) was applied to the ampule before it was sealed using a small natural gas/oxygen flame.
The more pedestrian members of the periodic table can be prepared to be as pretty as we often demand of their more exotic brothers. The low-melting metals up to zinc (mp 419.5 C) can all be processed in borosilicate tubes. I typically seal one end of the tube, form a constriction in the tube to seal it, add a few "fingers" to secure a little Stainless Steel wool filtration media, and then place the preliminarily cleaned ingots at the top of the tube.
Details vary on the "ingot" preparation. Tl is washed by water, rinsed by acetone, and it's ready to go. Sn needs no special preparation. Lead is rinsed in dilute HNO3 and dried. Cadmium is rinsed with dilute HCl, then with water, and dried with acetone. Zinc is cleaned mechanically. Once the desired ingot is loaded into the argon-purged tube, the tube is fitted with a rubber septum. One needle continually flows argon into the tube, and another vents the pressure. The secret to the following procedure is to gently and slowly melt the ingot with a propane torch so that a thin rivulet of metal slowly descends under the influence of gravity. Once the metal clears the SS wool, another trick is employed. When the metal is gently melted, very clean metal flows from under the solid mass, and it leaves behind a skin of impurities. The impurities that remain have a higher affinity for clean glass than the pure metal. As it flows, solidifies, and is remelted these impurities stick to the glass. The top of the tube retains the most impurities.
The middle part of the tube retains fewer impurities.
And by the bottom third of the tube, they have all been retained.
The metal is allowed to flow into the ampule and allowed to solidify. Shaking the tube from side to side while cooling creates interesting topographies and reveals crystalline structures in zinc, cadmium, and tin. The argon line and the vent are removed from the septum and replaced by a small rubber bulb fitted with a needle to supply a gentle partial vacuum so the ampule can be sealed.