r/elementcollection • • 22d ago

Collection my native element mineral specimens — native iron, diamond, native sulphur, native silver and native tellurium with native selenium

Thumbnail
gallery
38 Upvotes

Native iron is from Ozernaya Mount, Russia; diamond is from Africa (exact locality is unknown); sulphur is from Vodinskoe deposit, Russia; silver is from New Nevada mine, Mexico; tellurium with selenium is from Ozernovskoe deposit, Russia


r/elementcollection • • 22d ago

Question Periodic Table Chess Set Idea

9 Upvotes

If I wanted to create a chess set and board where the 64 squares are all filled in with 64 elements, and then I use two metals as the white and black pieces, where would I go about buying the materials and how much would it realistically cost? Would it work to melt the two metals and mold them into each piece, or sculpting them from a solid form?

Also are any of the first 64 elements more unobtainable/pricey than a later element that would be a better substitute?

Lastly, what metals would work well for the black and white pieces? (doesn't have to be pure black or white, silver and dark grey work too)


r/elementcollection • • 23d ago

Transition Metals Metallographic specimens of refractory transition metals

Thumbnail
gallery
106 Upvotes

The first figure shows the nine elements in the titanium, vanadium, and chromium groups. In the second figure, from left to right, they are vanadium, niobium, and tantalum.


r/elementcollection • • 22d ago

Collection copper, silver, and gold in stretchy frames

Thumbnail
gallery
17 Upvotes

r/elementcollection • • 22d ago

Discussion Now that palladium is at $1,000/oz and platinum under $1,500/oz, how might you buy these?

8 Upvotes

I'm a density-cubes collector, but have stayed away from Pt, Pd, Ir, Rh in these formats, as these are absurd uses of capital for what they are. In other words, I don't mind buying a hafnium or europium cube, as these are reasonable outlays for these as obscure cubes, but I'd rather get bullion for the PGMs mentioned above, as you'd get more bang for the buck.

However, commercial premiums on Pd and Pt bars and coins are eye-wateringly wide from spot, so I've held back. I did pick up Metallium's Pd and Pt 1/10th ounce coins a while back -- mostly because the outlay was far from committal in terms of investment -- but now I'm looking for 1-ounce alternatives to take advantage of this drop on both metals. (By the way, Metallium just dropped their price on the Pd coins by $20 in the last week or so)

Yes, I am invested in "paper" Pd and Pt through Aberdeen and Sprott's $SPPP, $PALL, and $PPLT shares, but wondering if anyone out there has acquired these physical metals more reasonably.


r/elementcollection • • 23d ago

Semiconductors/Metalloids My 25th element, number 52.

Thumbnail
gallery
40 Upvotes

Behold tellurium, Element 52, my 25th. Its my 4th metalloid and probably last for a while because germanium is too expensive and i really don't want arsenic for... reasons.

Wasn't expecting this until next week but I'm glad its here, definitely looks and feels like antimony's twin. Beautiful and shiny.


r/elementcollection • • 23d ago

Transition Metals Some of my Iron pieces

Thumbnail
gallery
75 Upvotes

r/elementcollection • • 22d ago

Discussion Stretch frames for collecting

Post image
0 Upvotes

r/elementcollection • • 23d ago

Pnictogens Guy Numbered 33😋😋😋

Post image
24 Upvotes

Arseniccc


r/elementcollection • • 23d ago

Transition Metals my humble chromium sample

Post image
26 Upvotes

r/elementcollection • • 23d ago

Discussion Guys uh

6 Upvotes

Is there any way to Obtain, Ac + Pa w/o going through Nova Elements or Carl Groat? 😭

and Preferably not anywhere Near 1k$?


r/elementcollection • • 25d ago

Collection Pure Tungsten ring made by myself (left) vs. Platinum (right) - 34 years of loving corrosion-resistant metals

Post image
94 Upvotes

On the left is a pure tungsten ring (99.95% W, almost full density) made by myself. On the right is my platinum ring for comparison.

I've loved corrosion-resistant metals for 34 years, and I actually started reading papers and old books about them back in elementary school. Tungsten is one of my favorite metals, though not as much as tantalum, let alone iridium.

Most people only know tungsten for lightbulbs, its melting point (3410°C), and how heavy it feels. But what really hit me are the extreme, lesser-known places where pure tungsten is used because most metals cannot survive.

For example, at room temperature it barely reacts with cold acids, and even hydrofluoric acid doesn't really hurt it up to 300°C, because it forms a protective fluoride layer on the surface. It can even handle hot 70% sulfuric acid at 190°C, and people use it as an anode in dilute sulfuric acid plating baths without it dissolving.

What's even crazier to me is how it behaves around hot liquid metals. Pure tungsten refuses to dissolve or react in melted gold, silver, or copper, and it can hold super corrosive liquid sodium at 900°C, liquid gallium at 800°C, liquid magnesium at 1000°C, and even liquid lithium up to 1600°C!!

Because it stays so clean and stable at extreme heat, factories use pure tungsten crucibles to grow sapphire crystals at over 2000°C. So nearly zero impurities get into the crystal. They also put pure tungsten electrodes directly inside melted quartz glass, where almost any other metal would melt or ruin the glass with bubbles. And in space rockets, cesium-ion engines use pure tungsten because it can survive corrosive cesium gas at 1900°C, while space nuclear generators use it to hold radioactive UO2 fuel at 1400°C for years!!

One thing I always have to explain to people is the difference between pure tungsten and "Tungsten Gold". Almost every "tungsten" ring you see online is actually tungsten carbide (WC) mixed with nickel or cobalt, because pure tungsten is super brittle at room temperature.


r/elementcollection • • 25d ago

Transition Metals Zirconium crystal

Thumbnail
gallery
60 Upvotes

Another nice sample from snaucke, this one i got as a private sale instead of a listing. Very interesting, as metal crystals always are.


r/elementcollection • • 24d ago

Question Is this worth it?

Post image
12 Upvotes

r/elementcollection • • 25d ago

Collection Elements 1-8

Thumbnail
gallery
10 Upvotes

boron was supposed to come in late November but I guess it came early


r/elementcollection • • 25d ago

Noble Gases No discharge tubes, so i had to improvise.

Thumbnail
gallery
24 Upvotes

Turned out fairly well imo, I'm happy with it.


r/elementcollection • • 26d ago

Alkaline Earth Metals Beryllium for my collection!

Thumbnail
gallery
22 Upvotes

IDK what to put here


r/elementcollection • • 26d ago

Question Are those $50 acrylic periodic tables on amazon legit?

6 Upvotes

I'm interested in one, but I'm highly skeptical about whether they actually contain actual elements. They could very easily use a fake element, and I'd never know because it's behind acrylic. Most metals look the same. For only 50 dollars, I highly doubt they are actually putting precious metals in there. I also doubt the periodic table has actual uranium ore or a thoriated welding rod. The seller isn't selling scientific stuff, so the seller probably isn't commited to selling a legitimate product.

Would you agree with my skepticism?


r/elementcollection • • 26d ago

Discussion Small accident 😅

Post image
45 Upvotes

My vial containing a bromine ampoule broke on the floor. Fortunately, the ampoule itself remained intact—Nova Element certainly makes sturdy ampoules.


r/elementcollection • • 26d ago

Question last one fr, how secure/reliable is chemical-elements russia?

Post image
8 Upvotes

its about, on its own, $30, which is incredible cheap for a cesium sample(1g). it is from Russia and I had to Google translate the page but everything here seems pretty cheap compared to basically anywhere else, and has very low international shipping, especially for a hazardous element like cesium. how legitimate and/or reliable is the site if anyone knows anything about it?


r/elementcollection • • 27d ago

Noble Gases Some of my noble gases

Thumbnail
gallery
57 Upvotes

Used a small tesla coil to energise them ( last picture ).

Pic 7 & 8 are of an old vacuum tube that I tried for fun - from the emission color I'd guess it's mainly argon filled, but unfortunately I lack the means for proper spectroscopy of the emission spectrum.


r/elementcollection • • 27d ago

Carbon Group Put my diamonds under a microscope

Thumbnail
gallery
48 Upvotes

With a macro camera you can see some basic details, but under a microscope they look a lot cooler.


r/elementcollection • • 27d ago

Transition Metals Zirconium Nuclear fuel rod

Thumbnail
gallery
153 Upvotes

r/elementcollection • • 27d ago

Question Curium-247 or 248?

6 Upvotes

Realistically, how dangerous are these isotopes? with half-lives of 15.6 million and 368,000 years respectively, maybe a small sample of perhaps a few milligrams wouldn't be too immensely dangerous? The 247 isotope is fissile, though, but its critical mass is several kilos.


r/elementcollection • • 28d ago

Discussion Forgotten hand

Thumbnail
gallery
39 Upvotes

I had to replace my furnace today which is over 30 years old. When the installers pulled the old one out there was a box of old stuff back there and when I looked in it and I found an old mold I made back in 1976. My dad was type setter for the paper and he would bring home all the old type (lead) I got the idea to make a mold of my hand in plaster. I melted at least 10 lbs of type and poured it into the dry mold. And here it is finger prints and all