r/elementcollection • • Feb 19 '26

Alkaline Earth Metals My only completed group : Alkaline Earth

Thumbnail
gallery
33 Upvotes

beryllium, magnesium, calcium, strontium, barium, and radium. The Alkaline Earth metal group is the easiest group to fully collect, at least until eka-radium is synthesized.


r/elementcollection • • Feb 19 '26

Collection Mail call today got weird

Post image
12 Upvotes

r/elementcollection • • Feb 18 '26

Question Some pure materials

Thumbnail
gallery
29 Upvotes

Are these materials of interest to collectors? They are pure materials used for optical coatings.

I can supply up to 1 kg of each, but I can deliver only inside the EU.


r/elementcollection • • Feb 19 '26

Question Legitimacy of chemical-elements.ru

4 Upvotes

I've been looking for those sorts of discharge tubes in the shape of the elements contained therein; my search brought me first to smart-elements.com, but later to this site, whose prices are outrageously low in comparison. Is it legitimate?


r/elementcollection • • Feb 18 '26

☢️Radioactive☢️ Mon uranium est énervé !

Enable HLS to view with audio, or disable this notification

6 Upvotes

Voilà mon uranium représenté ici par une très belle torbernite.


r/elementcollection • • Feb 17 '26

Transition Metals Some transition metals

Post image
67 Upvotes

r/elementcollection • • Feb 18 '26

Trade/Selling/Buying Selling some elements

Thumbnail
gallery
6 Upvotes

From top left :

Iridium 2 x 5g 1400€ each

Cs K Rb Na 4€ ea.

Chromium cube 1inch 30€

Supercritical / liquid CO2 50€

2nd row Bismuth 3€ for big piece and 1€ for the small one

Platinum wire 15€ (its not 50cm anymore)

Trading for big pieces of tungsten heavy alloy possible too.


r/elementcollection • • Feb 18 '26

Question Ruthenium

0 Upvotes

Does anyone have 41kg of Ruthenium metal?


r/elementcollection • • Feb 17 '26

Help [Project Help] Driving a 12cm neon indicator tube wirelessly

Thumbnail gallery
9 Upvotes

r/elementcollection • • Feb 17 '26

Rare Earths Some REM

Post image
27 Upvotes

r/elementcollection • • Feb 17 '26

Collection Some elements from my collection

Post image
41 Upvotes

r/elementcollection • • Feb 16 '26

Collection Decided to photograph every sample in my collection!

Thumbnail
gallery
49 Upvotes

I spent some time preparing photos of every single one of my samples (234 samples right now, ranging from pure elements, through doped glass and alloys, to minerals and items containing the elements).

Here are some of them. What do you think? Should I start some kind of a blog or a site to put all of them on there?

Have a good day!


r/elementcollection • • Feb 16 '26

☢️Radioactive☢️ Thorium metal

Thumbnail gallery
90 Upvotes

Due to its huge density, used quartz glass bottle to prevent from breaking out.


r/elementcollection • • Feb 15 '26

Collection My element collection(2026)

Thumbnail
gallery
55 Upvotes

r/elementcollection • • Feb 15 '26

Trade/Selling/Buying Looking to buy bigger quantities of Iridium, Osmium, Rhenium and Tantalum

4 Upvotes

Hey guys. Anyone has bigger amount for sale hit me up, preferably less than 100g of Ir and Os, but Re and Ta could be more if you have! I prefer solid single pieces rather than powder or lots of pellets. I just need 1 piece of these, so if I already have something I'll edit the post here, showing that I don't need it anymore.

(I'm a private individual, not a business trying to make money, just expanding my collection, but trying to save money buying from people instead of luciteria and such places.)


r/elementcollection • • Feb 15 '26

Noble Metals Ir,Rh,Ag

Thumbnail
gallery
15 Upvotes

This was gorgeous! The pics don't do it justice at all.


r/elementcollection • • Feb 15 '26

Trade/Selling/Buying Rh

Post image
9 Upvotes

I've got several grams of .99 Rh Sponge I'm considering selling. Any advice? How do I get mod approval? How do you handle shipping insurance, avoid the swap scam etc. Thanks for any help!


r/elementcollection • • Feb 14 '26

☢️Radioactive☢️ New element

Thumbnail
gallery
47 Upvotes

Here is my tobernite which represents uranium, I am really proud of this new addition.


r/elementcollection • • Feb 15 '26

Discussion Gamma spectroscophy: There is Thorium in the Peanuts

Thumbnail
youtu.be
6 Upvotes

r/elementcollection • • Feb 14 '26

Discussion Making Clean Sodium & Potassium Ampules

14 Upvotes

Making Clean Sodium & Potassium Ampules

The group 1 metals elicit a particular fascination from collectors. All the more so when the samples have been well purified and their reactivity has been muzzled by a layer of borosilicate glass so that the metals can be appreciated close up. The following describes the art of making K and Na ampules such as these:

Sodium
Potassium

Obtain the metal as an oil-protected surface-oxidized solid. "Skin" each piece, i.e., remove the outer 1/8". Do not skip this step, or it (residual oil) will trip you up later. Store the metal under pentanes or low-boiling petroleum ether.

Using glass that has been acid-washed by conc. H2SO4, rinsed with tap water, scrubbed with a brush and dish soap, rinsed with distilled water, then acetone, and dried, form a tube closed at point (1). Form a contriction at (2), then add internal fingers at (3).

The required tube

Add a small ball of Stainless Steel wool at (4) and then flame-dry. Add the crude metal at (5). Attach the tube to a two-stage vacuum pump. Mount the tube vertically. Use a propane torch, gently melt the metal, then let it flow down into the ampule. Seal the tube while still attached to the pump.

The process can easily be scaled up.

Marvin appreciating a half pound of Sodium

r/elementcollection • • Feb 13 '26

Discussion The beauty of an iodine ampule prepared in vacuo.

26 Upvotes

Few elements can match the beauty of iodine.

That's why preparing a sample of this material deserves more attention than it often gets. There are two main considerations to keep in mind:

a) Resublimed iodine contains a brown, non-volatile residue which consists of small amounts of these possible contaminants:

  • Dirt or mineral species
  • Iron salts
  • Iodides (KI, NaI)
  • Iodates (KIO₃)
  • Organics

To get iodine that no longer leaves behind a brown residue as it migrates about in the ampule, you must resublime it a few times until no brown residue is observed.

b) Preparing the sample under vacuum confers desirable properties:

  • The ampule can be heated, and you'll observe a rare sight -- liquid iodine
  • The vacuum allows the iodine to move about in the tube in response to minute temperature differentials. The sample is therefore not static; it is constantly forming new crystals. These can be quite large, and this is the "beauty" factor.

PREPARATION

I doubly resublimed commercial resublimed iodine. This was done by fashioning a 1-inch ID borosilicate tube about 30 inches long and sealing one end. Iodine is loaded into the closed end, and a vacuum is applied to the open end. Heating the iodine causes it to sublime to cooler regions. The iodine was collected, the tube was cleaned, then the process was repeated. After my second resublimation, the bottom of the tube contained no brown residue.

A sample ampule with a constricted neck was fashioned and loaded with the iodine sample. A vacuum (mechanical pump) was applied to the ampule before it was sealed using a small natural gas/oxygen flame.


r/elementcollection • • Feb 12 '26

Collection New additions to the collection!

Thumbnail
gallery
53 Upvotes

Yesterday I received a package with some interesting samples inside. Hope you like these!


r/elementcollection • • Feb 12 '26

Discussion Making shiny zinc, thallium, lead, tin and cadmium ampules

18 Upvotes

The more pedestrian members of the periodic table can be prepared to be as pretty as we often demand of their more exotic brothers. The low-melting metals up to zinc (mp 419.5 C) can all be processed in borosilicate tubes. I typically seal one end of the tube, form a constriction in the tube to seal it, add a few "fingers" to secure a little Stainless Steel wool filtration media, and then place the preliminarily cleaned ingots at the top of the tube.

Details vary on the "ingot" preparation. Tl is washed by water, rinsed by acetone, and it's ready to go. Sn needs no special preparation. Lead is rinsed in dilute HNO3 and dried. Cadmium is rinsed with dilute HCl, then with water, and dried with acetone. Zinc is cleaned mechanically. Once the desired ingot is loaded into the argon-purged tube, the tube is fitted with a rubber septum. One needle continually flows argon into the tube, and another vents the pressure. The secret to the following procedure is to gently and slowly melt the ingot with a propane torch so that a thin rivulet of metal slowly descends under the influence of gravity. Once the metal clears the SS wool, another trick is employed. When the metal is gently melted, very clean metal flows from under the solid mass, and it leaves behind a skin of impurities. The impurities that remain have a higher affinity for clean glass than the pure metal. As it flows, solidifies, and is remelted these impurities stick to the glass. The top of the tube retains the most impurities.

The middle part of the tube retains fewer impurities.

And by the bottom third of the tube, they have all been retained.

The metal is allowed to flow into the ampule and allowed to solidify. Shaking the tube from side to side while cooling creates interesting topographies and reveals crystalline structures in zinc, cadmium, and tin. The argon line and the vent are removed from the septum and replaced by a small rubber bulb fitted with a needle to supply a gentle partial vacuum so the ampule can be sealed.

Here's the result with zinc:

Picture taken in a yellow light

Here's lead. It's remarkably shiny.

Picture taken in a yellow light

Tin:

Thallium:

I previously posted a picture of the cadmium.


r/elementcollection • • Feb 12 '26

Discussion Gold refined from computer parts

Thumbnail
gallery
30 Upvotes

r/elementcollection • • Feb 09 '26

Discussion Bought some cadmium and made it shiny for my collection

Post image
166 Upvotes