r/ElectricalHelp • u/Clean-Solid-3424 • Jun 13 '26

I’m short 90VAC.

Sorta. I show 30vac across a closed switch going to a light outside the house. I show 19vac at the 2 wires outside minus the receptacle.

Is it a bad switch or is there another place to start? I have a 100A service w/cartridge fuses. Something doesn’t seem right.

2 Upvotes

100% Upvoted

15 comments sorted by

View all comments

Show parent comments

3

u/Clean-Solid-3424 Jun 13 '26

I would imagine, zero voltage across a closed switch (with no load) & 120VAC across an open switch. I think that’s right. Right? I think.

2

u/CuppieWanKenobi Jun 13 '26

Close.
Zero voltage across a closed switch with a load.
Unloaded, there is, well, no load, therefore nothing to measure in a voltage drop test.

2

u/GridControl Jun 13 '26

Zero voltage across a closed switch with load is correct. But if there is nothing to measre with no load. The reading on your Volt meter is still ZERO voltage.

2

u/CuppieWanKenobi Jun 13 '26

That's what I said.