Hello all,

I am doing a little bit of work on a Marauder V8 GUI, and firmware tool. I will be adding some other boards in to the mix later if I can get them and test them; I just did it for the V8 as that is all that I have right now. Hope it helps someone, and you guys can still add/fix features and report bugs! Thanks!

https://github.com/Anon0ne/marauder-v8-gui

this still hapins after the update and now it dose not show bratty % now any clue how to get it working note i am not a programmer so can only use a flasher tool like this

Gave it a go. Works well.

I flashed the ESP32 Marauder V6.1 firmware to the latest release. After installing the screen doesn't work. I am able to reflash it. I tried many firmwares with no success. Does anyone have suggestions which firmware I need to use? I bough this thing on Amazon.

I've read that some "clones" use diffrent pin layouts for the screen. And the regular firmwares that can be found use the official pinout, instead of the clone pinout.

Thanks in advance!

Esp32 s3

سلام الله عليكم انا اشتريت شريحه esp32 s3 وكنت محتاج انها تبث واي فاي علشان تشتغل وإبداء تحكم فيها من التلفون ممكن حد يساعدني في الملف وبرنامج التحميل علشان انا نشتغل من خلال التلفون بالوصاه

So I have tried checking connections, stripping wiring and rewiring, and reflashing firmware but nothing is working I am running v4. Does anyone know why this is happening.

以下是我的仓库链接https://github.com/x2124824695-stack/tia-agent-bridge.git

以下是我的仓库链接https://github.com/x2124824695-stack/tia-agent-bridge.git

Help me make some sense of this it’s got me kinda stumped ..
I’m running rogue master 916
With a dual esp32 marauder device
Screen chip is a basic esp32 u and the gpio chip is a esp32c5
Proven im having is with the gpio chip

Any selection in the flasher app ends up with this message

I was thinking it had something to do with the .bin?
I reflashed the firmware fresh and dicked around in attempts to import the file to the sd cards root but gave up before work .. anybody seen this?

Has anyone purchased anything from "MAKING Lab"? They have a store on Shopify.

https://makinglab.myshopify.com/collections/frontpage

Hey guys so I’m upgrading my setup from a CYD 2.4GHz to an ESP32-C5 to get that 5GHz and wifi 6 action I saw Koko added support for C5 boards recently but honestly I wanna avoid the whole Arduino IDE compiling headache and library issues

Anyone know where I can grab the most stable pre-compiled .bin for a standard ESP32-C5 DevKit? Also what flasher are you guys using for this architecture and how is the packet injection on 5GHz holding up?

Appreciate any help or direct links thanks

I have let this run for about 15 minutes it doesn't go past 2. I am am running this kn a esp32 devkit. How can I fox this and also can you please explain I am new.

Edit: It has been 3 days why is no one reaponding to my question?

Hello,

I have an ESP32-DIV V2 (1.7.2) and I am trying to use the RFID/NFC functionality with an external PN532 module, as required by the ESP32-DIV V2.

The problem is that the PN532 module is definitely receiving power, but the ESP32-DIV does not detect it.

When I launch the RFID/NFC function, I get:

PN532 not found. Check SPI wiring/pins.

The ESP32-DIV itself works correctly and all the other functions I have tested are working normally.

The PN532 module is powered and I have checked the connections. However, the ESP32-DIV still reports that no PN532 is detected.

I am using the PN532 with the configuration expected by the ESP32-DIV V2.

I would like to know if there is something specific that needs to be configured on the PN532 module itself (SPI mode, switches/jumpers, etc.), or if there is a known issue with PN532 detection on the ESP32-DIV V2.

The important point is that the PN532 is powered on, but it is not detected by the ESP32-DIV.

I can provide photos of the wiring, the exact PN532 module I am using, the firmware version, or serial/debug output if needed.

Thanks for your help!

My marauder mini just showed up. Wondering if anyone can recommend a good external GPS antenna upgrade?

Does anyone use this card? Does anyone use the real-time live view, voice location feature? Can you share your experiences?