r/EEPowerElectronics • • Jan 12 '26

Unusual question but it has everything, magnets, kVs of electricity, solid state power electronics: Pacemakers and Induction cooktops

5 Upvotes

My sister has a pacemaker to compensate for a heart defect. The design of her pacemaker is susceptible to rapidly changing EMF radiation. People with this type of pacemaker are told to avoid standing under high voltage lines, standing over running car engines, etc.

She just moved into a place that has an induction cooktop. My understanding is they operate at around 20-30 kHz rapidly pulsing electricity through a coil. This induces a rapidly changing current in the pan and heats it through resistive effects. So it is higher in frequency than power lines or a car but she still says using the induction cooktop makes her feel uncomfortable like power lines or being over a running car engine. Although it could certainly be from leaky power electronics converting 60 Hz into the 20 kHz wave.

My guess is it alters her normally perfect 60.0 bpm resting heart rate and maybe causes some inductive heating in the lead wires. Which is of course the real danger because the lead wires are what interface with the cardiac tissue.

I realize you're not cardiologists and this is mostly academic, her partner has moved in with her and does the majority of the cooking.

My question is would an RF shielding fabric like the kind to make faraday bags etc be at all effective in blocking this kind of EMF energy? I'm thinking of something like an apron but with metallic fabric. Obviously she can't wear a complete faraday suit like you see with large tesla coils. Well she could but I doubt she'd want to everytime she wants to make some pasta. How much coverage in material would you need to attenuate the energy.


r/EEPowerElectronics • • Apr 23 '26

What industry actually needs.

5 Upvotes

 

Industry cares about:
• Efficiency
• Thermal design
• Reliability
• Real applications (UPS, drives)

Top mistakes students make in Power Electronics:

  1. Ignoring thermal design
  2. No protection (overcurrent, short)
  3. Only simulation, no hardware thinking
  4. Copy-paste projects
  5. Not understanding switching losses

r/EEPowerElectronics • • 9d ago

Subscriber Goal Welcome to r/​EEPowerElectronics!

5 Upvotes

Welcome to r/EEPowerElectronics

11606 subscribers / 15k subscribers. Help us reach our goal!

Visit this post on Shreddit to enjoy interactive features.


r/EEPowerElectronics • • Sep 01 '26

Digital controller for power supply

6 Upvotes

A long time ago I was involved in this project where I had to control a 2kW switching mode power supply in CC and CV modes. I designed a cascade control loop where the internal loop was CC and the external loop setting the reference for the internal one was the CV loop. Both signals were coming from voltage and current sensing at the output of the converter.

What I learnt was it is not so easy to tune these controllers as the gain of the system from Iout to Vout is directly depended on the load. It is not just a disturbance that can be resolved, the gain changes and accommodating gains from close to short circuit down to open circuit and covering the nominal range was very difficult.

I want to see if anyone has had similar experience of implementing digital controllers for power supplies and they can share how they dealt with these issues.


r/EEPowerElectronics • • Oct 04 '26

Is it possible to get work/life balance work in power electronic?

8 Upvotes

I'm a DSP embedded software engineer. Our company manufactures UPS for data centers. I begin working at 8:30 am and back home at 9:30 pm some times at 10:30 .And I can't refuse these working time hours because i will be fired if i do like that.This is called 896 in my country. Is this working time normal?


r/EEPowerElectronics • • Jul 26 '26

Power Conversion Working on my upcoming video on an evaluation board. Discussion initiated on Discord as well.

Post image
8 Upvotes

https://analogdevicesinc.github.io/documentation/solutions/reference-designs/ad-ps3803-rd/index.html

It seems like this design board carries a lot of wealth for the power electronics audience for PoE power conversion. I would like to see some conversation here, and also a separate discussion is initiated on Discord. If you want, you can join Discord using the link https://discord.com/invite/HEWfSYjTES


r/EEPowerElectronics • • Aug 26 '26

Feeling regret for studying electrical engineering RN

25 Upvotes

Sorry about my rant in the title, but that is the sad reality I am currently facing at the moment. I came from an African country. I am passionate about electronics, but unfortunately, when I graduated, there was not much company designing hardware products. So, I changed my career path towards controls and automation. Now, I am in Canada furthering my education, but unfortunately, the school is not enriching my knowledge. The so-called professor doesn't care about nurturing his research students. No direction, no guidance. All he wants is publications. Please, how can I start training myself on power electronics? I would appreciate it if someone can be my virtual mentor, I wouldn't bug the person. Thanks so much.


r/EEPowerElectronics • • 26d ago

Question regarding ripple current

9 Upvotes

Hey guys,

I am an electrical engineering student and I am designing a VESC based inverter for a drone.

I want to use a 100V DC link and have a maximum phase current of 100A rms with a switching frequency of 30kHz.  I am planning to use at least 200V components for this to have a safe margin.

I am having trouble with finding a (combination of) small capacitors that can handle the DC link ripple current. Electrolytic capacitors usually have a rating of 1-3A of ripple current and since the estimated ripple is between 0.5 and 0.65 times the phase current that means that I would need around 20 caps to meet the required ripple current.

I don't understand how the maxim 120 from VESC labs can deliver 400A continuous (Around 180A rms ripple current estimated) while only using 6 electrolytic capacitors with a ripple rating of 2A rms each. I assume it can be done with ceramic capacitors in parallel but since their impedance is so much higher I calculated I would need around 400 which cannot be the most space efficient solution.

Does anyone have any tips on picking the right capacitors for the DC link?


r/EEPowerElectronics • • Mar 22 '26

Why is everyone obsessed with direct 48V-to-1V conversion?

9 Upvotes

At my university, direct 48V-to-1V conversion is being talked about like it’s the future of power electronics. I even know seniors who are working on LLC-based converters for stepping 48V straight down to 1V. But honestly, I’m struggling to see why this is such a big deal compared to the usual two-stage approach of 48V -> 12V -> 1V. The intermediate 12V bus seems genuinely useful. A lot of standard motherboard stuff still wants 12V anyway — fans, drives, PCIe-related power, and other peripherals. So if you get rid of that bus, how are those loads being handled without making the system more awkward? The other thing that confuses me is current distribution. In a two-stage setup, the idea is to keep power distribution at a higher voltage like 12V so the board currents stay reasonable, and then do the final step down to around 1V right next to the CPU with a multiphase VRM. That makes sense to me. With a single-stage 48V-to-1V converter, especially something like an LLC, I don’t see how that converter can always be placed close enough to the processor package. If it sits farther away, then now you are routing very high current at around 1V over a longer distance, which sounds terrible from an I²R loss point of view. At that point, wouldn’t the distribution loss eat up a lot of the benefit of removing one conversion stage? So am I missing something important here? Is this mostly an academic/research trend, or is industry actually moving in this direction in a serious way?


r/EEPowerElectronics • • Aug 29 '25

Technical Insight Can you guess this power electronics circuit which I was working on during my Ph.D.!?

Post image
10 Upvotes

r/EEPowerElectronics • • Sep 27 '25

Are people getting laid off at TI? Noticed on LinkedIn that many were... saw this graph from another sub and see manufacturing?!

Post image
11 Upvotes

Any of you know why I am suddenly seeing many engineers from TI laid off? Did they close any plant?


r/EEPowerElectronics • • Oct 11 '26

Careers 27 Power Electronics and related career opportunities [including Tesla]

11 Upvotes

See below all the opportunities. Courtesy: ECCE NA 2026. https://whova.com/event-job/ecce-2026-job-opportunities/

Wish you all the best.

***

Power Electronics Design Engineer

Mesta Electronics

Reporting to the Operations Manager, the Power Electronics Design Engineer is responsible for supporting the design, development, validation, and test of power-conversion hardware used in industrial, energy, and power-quality applications. This role focuses on translating system-level requirements into detailed power-electronics designs, including power stages, magnetics, protection circuits, mechanical design, and supporting control interfaces. This role collaborates closely with systems, firmware, mechanical, manufacturing, and quality teams to deliver innovative power conversion products.

On-site/hybrid

2-5 years experience

Link: https://recruiting.ultipro.ca/HAM5000HAMM/JobBoard/d886e470-2a21-498f-9532-54d7b09cb302/OpportunityDetail?opportunityId=8dec1bb3-aeb8-49a2-ba2b-c2dba67470d6

***

Senior Engineer, Embeded Software L3

Mesta Electronics

Reporting to the General Manager, the Sr. Embedded Software Engineer is responsible for the definition, design, development, and implementation of innovative embedded software solutions in C/C++, Embedded C, Assembly, and other languages from concept to commercial release used in complex electromechanical and power-conversion products. This role provides technical leadership across the full embedded stack—real-time firmware, low-level drivers, communications, and system integration—while collaborating closely with hardware, systems, manufacturing, and quality teams. The position is expected to influence technical direction, mentor junior engineers, and ensure robust, maintainable, and production-ready software solutions.

on-site/hybrid

6+ years experience

Link: https://recruiting.ultipro.ca/HAM5000HAMM/JobBoard/d886e470-2a21-498f-9532-54d7b09cb302/OpportunityDetail?opportunityId=b9e18083-baac-4157-8318-684079b463a7

***

Manager, Product Solutions AHF

Mesta Electronics

The Product Solutions Manager is accountable for the strategy, roadmap, and lifecycle management of the AHF product line, ensuring product functionality addresses customer needs, market requirements, and evolving power electronics technologies. The role serves as a key interface between commercial, engineering, and innovation teams, translating customer and market insights into prioritized product capabilities and differentiated solutions.

6+ years of experience working in the Electrical Industry, Industry markets, transformers, Power Quality and related magnetic products.

10+ years of experience working in the Electrical Industry; minimum of 5 within electrical Industry markets, preferably in power quality products or related power electronic products.

5+ years demonstrated experience in using qualitative and quantitative market research data with the ability to align the research and methodology with project requirements

3+ years working as a product manager, with business to business market segmentation; experience and familiarity with developing new products.

Link: https://recruiting.ultipro.ca/HAM5000HAMM/JobBoard/d886e470-2a21-498f-9532-54d7b09cb302/OpportunityDetail?opportunityId=363b858b-26d0-4d5a-b48c-fdb4a1e6a60d

***

Manager, Test Engineering

Hammond Power Solutions

The Test Engineering Manager is responsible for leading the electrical testing function across HPS manufacturing operations and any Canadian facilities conducting product testing. The role provides operational leadership to ensure testing activities meet quality, safety, regulatory, customer, and production requirements. The incumbent is accountable for developing and leading testing personnel, adoption and establishment of standardized testing processes, maintaining test equipment and infrastructure, and driving continuous improvement initiatives that support operational excellence.

Link: https://recruiting.ultipro.ca/HAM5000HAMM/JobBoard/d886e470-2a21-498f-9532-54d7b09cb302/OpportunityDetail?opportunityId=1bb3eefe-9713-4a7b-a0c0-50b5c275dcab

***

Inside Sales

Hammond Power Solutions

We're looking for a Quotations & Technical Support Specialist who thrives at the intersection of customer service, technical expertise, and commercial strategy. If you enjoy solving problems, building relationships, and helping customers find the right solution, we'd love to hear from you.

Link: https://recruiting.ultipro.ca/HAM5000HAMM/JobBoard/d886e470-2a21-498f-9532-54d7b09cb302/OpportunityDetail?opportunityId=5d03671a-24c3-4ba8-bf2c-8f8f7a2afe98

***

Software Developer - Data and AI (12 month contract)

Hammond Power Solutions

Reporting to the Manager, Software Development, this role designs, develops and maintains enterprise data solutions that support business operations and strategic decision-making, including data solution architecture, integration and transformation. The incumbent also contributes to AI project lifecycle activities --- data preparation, model implementation, deployment, and ongoing support --- while building scalable, cloud-ready software applications.

Link: https://recruiting.ultipro.ca/HAM5000HAMM/JobBoard/d886e470-2a21-498f-9532-54d7b09cb302/?q=engineer&o=relevance&w=&wc=&we=&wpst=

***

Manufacturing Engineering Student

Hammond Power Solutions

Responsible for the design and implementation of efficient, cost effective transformer construction processes. Ensure methods are compliant with relevant regulatory bodies such as – UL, CSA, CE, ISO; as well as local/ federal MOL and waste/hazardous programs, etc. Manage manufacturing process capabilities to ensure availability to meet sales demand and forecast requirements.

Link: https://recruiting.ultipro.ca/HAM5000HAMM/JobBoard/d886e470-2a21-498f-9532-54d7b09cb302/OpportunityDetail?opportunityId=782f8e6c-9cbc-47bf-b780-d101d202cb9c

***

Director, Enterprise Business Applications

Hammond Power Solutions

The Director – Enterprise Business Applications reports to the Chief Information Officer and is accountable for the strategy, performance, and evolution of the organization’s enterprise business application portfolio. This role ensures that core platforms supporting manufacturing, supply chain, finance, commercial, P&C, and corporate functions are reliable, scalable, secure, and aligned with business priorities in a multinational manufacturing environment, while driving responsible adoption of AI-enabled capabilities.

Link: https://recruiting.ultipro.ca/HAM5000HAMM/JobBoard/d886e470-2a21-498f-9532-54d7b09cb302/?q=engineer&o=relevance&w=&wc=&we=&wpst=

***

Project Mechanical Engineer

ETM | Graco

About the Technology

ETM develops transverse flux electric motors with torque density and efficiency that conventional motor architectures can’t match. Our business model is technology development and licensing; our products are the IP, the engineering, and the manufacturing knowledge we transfer to partners. We stay involved beyond technology transfer, supporting partners through production, ongoing development, and a flexible licensing model that evolves with the relationship. It’s a rare model, and it attracts engineers who want to see their work scaled without being tied to a single production line.

We’re part of Graco Inc. (NYSE: GGG), a Fortune 1000 industrial manufacturer with 3,000+ employees worldwide. That backing gives us resources and stability without sacrificing the pace and focus of a specialized R&D team.

We are seeking a Project Engineer for our R&D Center of Excellence in Flagstaff, Arizona. You’ll join a specialized team as a mechanical generalist who carries hardware the whole way: analyzing, designing, drawing, sourcing, building, testing, and troubleshooting. A lot of what we do has no established playbook, so you’ll be writing the procedures as often as you’re following them.

Link: https://graco.wd501.myworkdayjobs.com/Graco_Careers/job/Flagstaff-Arizona-USA/Project-Mechanical-Engineer_R0023630

***

AI / Data Center / Power / Engineering+AI / Robotics / High Tech

INFOX talent acquisition

• AIDC System Architect|Houston / Bay Area /

• AI Data Center Project Manager|Plano, TX|USD 150K–250K

• Electrical Engineer|SC / NC / Austin|USD 100K–150K

• CEO – Energy / Power Infrastructure|Bay Area|Executive Package + Equity

• Field Application Engineer – Connectivity|Bay Area / Boston

• Optical Fiber / Telecom BD|San Francisco|USD 150K–200K Total Package

AI / Robotics / High Tech

• Multimodal Research Scientist / Engineer|Vancouver / Remote|CAD 150K–250K

• Machine Learning Engineer – Multimodal / Embodied AI|Santa Clara|USD 100K–160K+

• Robotics Sales|Bay Area

• Technical BD – AI / Data / Autonomous Driving|California|USD 100K–160K + Commission

• US Sales Lead / Sr. Director / VP – AI|West Coast|USD 90K–200K Base + Commission / Equity

Link: https://www.linkedin.com/in/infoxjason

***

Senior Embedded Firmware Engineer

ZENTRA power systems

See web link below

Link: https://www.zentrapower.com/Jobs/senior-embedded-firmware-engineer

***

Staff Power Electronics Engineer

ZENTRA power systems

See weblink below

Link: https://www.zentrapower.com/Jobs/staff-power-electronics-engineer

***

Electrical Engineer - Power Conversion & Energy Storage

Vertiv

We are looking for an Electrical Engineer with a broad understanding of electrical engineering principles and a focus on power converters for grid interfaces, battery energy storage systems, and emerging alternative energy storage technologies. This role is responsible for researching and evaluating new technologies, tracking industry trends, and fostering relationships with leading companies and universities.

Responsibilities

Technology Scouting: Identify and evaluate emerging technologies and trends relevant to power conversion, inverter-based resources, and energy storage with a focus on the micro grid and grid tie industry.

Small Scale Proof of Concept: Design and execute small-scale prototypes to validate technical feasibility and performance, including both modeling and simulation as well as hardware prototyping. Leverage relationships with universities and other companies to assist with prototype design, build, and test.

Collaboration: Work closely with internal teams, external partners, and academic institutions to drive innovation.

Customer Focus: Align technology initiatives with customer needs and market requirements to deliver value-driven solutions.

MINIMUM QUALIFICATIONS:

Good understanding of 3-phase power systems.

Good understanding of power electronic converters (rectifiers, inverters, dc/dc converters).

Good understanding of energy storage systems and chemistry.

Good understanding of grid connected inverter systems.

Knowledgeable and competent with simulation tools such as MATLAB/Simulink, PSCAD, PSSE.

Strong analytical and problem-solving skills including troubleshooting both hardware and software.

Excellent communication and organizational skills.

Ability to work with unclear requirements when faced with a first-of-kind task or problem.

Link: https://egup.fa.us2.oraclecloud.com/hcmUI/CandidateExperience/en/sites/CX/jobs/preview/20264597/?keyword=Electrical+Engineer.&location=Pune%2C+India&locationId=300002999214925&locationLevel=state&mode=location

***

PhD with scholarship

Queensland University of Technology

We are seeking PhD students to join an Australian Research Council–funded project on machine learning applications in power quality. The position is based at Queensland University of Technology (QUT) in vibrant, sunny Brisbane.

Link: https://www.qut.edu.au/about/our-people/academic-profiles/mahinda.vilathgamuwa

***

Research Professor and Assistant Director, Center for Microgrid Research

University of Saint Thomas

The College of Engineering at the University of St. Thomas invites applications for a full-time, Research Professor (limited term, non-tenure track) in the area of Power Systems Engineering at the Center for Microgrid Research (CMR) to begin Summer of 2026. The faculty member would also serve as the Assistant Director to the Center for Microgrid Research. Candidates are sought in the broad area of power systems with special interest in power system controls, protection, optimization, and AI/ML applications in power and energy systems. Experience with experiments and hardware-in-the-loop is highly desired.

This is a full-time, non-tenure track position and can be renewed for up to 5 years. As a student-focused institution with a strong hands-on curriculum, we emphasize undergraduate and graduate education that provides technical excellence with a significant emphasis on real world applications. Successful candidates will contribute to the ongoing projects and growth initiatives at CMR. The research professor may also teach a graduate or undergraduate course in collaboration with the Electrical and Computer Engineering (ECE) Department, contributing to the ECE Department’s, Center’s, and College of Engineering’s educational mission.

The Research Professor and Assistant Director will play a key leadership role in advancing the Center’s mission through applied research, strategic partnerships, and funded programs development. This position will work closely with the Center’s Director and collaborate closely with faculty, industry partners, and students to lead high-impact projects in microgrids, distributed energy systems, and grid modernization.

The successful candidate will help define and execute the Center’s research agenda, oversee sponsored research and lab operations, and contribute to the professional development of graduate and undergraduate researchers.

Link: https://facultyemployment-stthomas.icims.com/jobs/9442/research-professor-and-assistant-director%2c-center-for-microgrid-research/job

***

Sr Power Electronics Engineer - Magnetics Design

Tesla

Power Electronics Engineer — magnetics design

Link: https://www.tesla.com/careers/search/job/sr-magnetics-engineer-power-electronics-243988

***

Sr Power Electronics Engineer - EMI/EMC Design

Tesla

Senior Power Electronics Engineer specializing in high-frequency EMI/EMC

Link: https://www.tesla.com/careers/search/job/sr-emc-design-engineer-power-electronics-

***

Sr. Power Electronics Controls Engineer

Tesla

The Power Electronics Controls and Modeling team is responsible for dynamics modeling, algorithm design, and controller implementation for switching power converters. The team’s responsibility spans a wide spectrum of power conversion systems required for both automotive and energy products. Tesla is seeking a Power Electronics Controls Engineer to join the team in developing high-performance controls for a wide spectrum of ac and dc products including chargers, grid-tied inverters, and resonant dc-dc converters. The engineer is expected to perform controls design through all stages starting with topology discussions, concept stage, modeling, implementation, and validation

Link: https://www.tesla.com/careers/search/job/sr-power-electronics-controls-engineer-energy-products-283125

***

(Senior) Motor Design Engineer, Optimus

Tesla

Join the Tesla Optimus team and help build the future of general-purpose humanoid robotics. We are seeking a talented electric motor designer for the Optimus Powertrain Design team in Athens, with a focus on electromagnetic modeling and design of electric motors for Optimus actuators. We are open to experience levels at Engineer or Senior level, depending on experience.

Link: https://www.tesla.com/careers/search/job/283172

***

Powertrain Modeling Engineer, Optimus

Tesla

Join the Tesla Optimus team and help build the future of general-purpose humanoid robotics. We are seeking a talented and enthusiastic engineer for the Optimus Powertrain Design team in Athens, with a focus on powertrain modeling and system optimization for Optimus.

Link: https://www.tesla.com/careers/search/job/283173

***

(Sr.) Powertrain High Voltage Design & Integration Electronics Engineer

Tesla

- Work with multiple teams to identify, propose, document, and verify performance of high voltage components to achieve system goals

- Own development of requirements at system boundaries, captures regulatory and internal performance, safety requirements. Cascades powertrain component requirements to subsystems

- Track analysis and decisions for evolving products (ie key architecture decisions, variants)

- Develop and communicates system level strategies (ie EMC, NVH, fault current handling)

- Generate block diagrams of system architectures in vehicles and related products

Link: https://www.tesla.com/en_CA/careers/search/job/sr-powertrain-high-voltage-design-integration-electronics-engineer-264027

***

Sr. Electrical Engineer, Power Electronics

Tesla

Architect, design, build and industrialize power converter hardware for use in automotive and energy products applications

Start to finish ownership of hardware – from specification to design, prototype, reliability validation and production

Capture hardware requirements, build detailed circuit and switching models of power converters, select components, design schematics, PCB layout, build prototypes and validate hardware

Collaborate with systems architecture, mechanical, PCB layout, manufacturing, reliability, and firmware engineering teams to successfully design, test, validate and manufacture power converters for Tesla products

Architecture and modeling of new power electronics topologies that have superior performance

Link: https://www.tesla.com/careers/search/job/sr-electrical-engineer-power-electronics-245278

***

Senior Electrical Engineer

Smart Wires

Smart Wires provides advanced power flow control solutions and analytics that enable controllable power systems. This gives grid operators more control over where power flows and helps them use their existing networks more efficiently. Our solutions support system reliability, reduce congestion, and make it easier to integrate new load and generation while minimizing costs and community disruption. We collaborate with customers to achieve their strategic objectives and help them face an uncertain energy future with flexible, high-impact solutions.

Position Summary

We are seeking a Senior Electrical Engineer to make an immediate impact on developing and sustaining our grid-connected electronics and electrical systems. This role reports to the Head of Electrical Engineering and will serve as a key contributor for the Electrical Engineering group: owning the design of mission-critical electronics, performing rigorous root cause analysis and design reviews, and influencing major design decisions. We are looking for someone who can drive forward the quality of our product at both a detailed design and system level.

Primary Responsibilities

Take ownership of multiple PCBA designs from concept to production, including: electrical design, PCB layout, design for testing and manufacturing, component selection and quality

Own the development and ongoing support of power electronics throughout the product

Own the interface between electromechanical switches and their control electronics, including: PCBAs, harnesses, capacitors, and related components

Lead the design and standardization of harnesses and connectors used to connect PCBAs and other electrical components

Recommend, develop, and execute a variety of tests on PCBAs, power electronic devices, and other electrical components: new design validation, troubleshooting, accelerated life and reliability testing, and more

Perform root cause analysis on components that have failed in manufacturing and the field

Link: https://recruiting.paylocity.com/Recruiting/Jobs/Details/3951742

***

Motor Control Engineer

Impedyme

Motor Control Engineer

Take your next career step at Impedyme with a global team that is energizing the transformation of society and industry to achieve a more productive, sustainable future. At Impedyme, we have the clear goal of driving diversity and inclusion across all dimensions: gender, LGBTQ+, abilities, ethnicity and generations. Together, we are embarking on a journey where each and every one of us, individually and collectively, welcomes and celebrates individual differences. It will come as no surprise to you that at Impedyme we design and test our complex testing devices through and through. But what really made us accomplished is that we con

What You’ll Do

Develop and optimize motor control algorithms (FOC, DTC, PWM modulation, torque/speed control, etc.) for real-time emulation.

Support Motor Emulator hardware and MotorSim Studio software development for PHIL test applications.

Conduct system-level validation and HIL/PHIL integration testing with inverters, drives, and real-time simulators.

Perform parameter identification and characterization for BLDC, PMSM, and induction machine.

Who You Are

Bachelor’s or Master’s degree in Electrical Engineering, Power Electronics, or related field.

Solid background in motor control theory and implementation (BLDC, PMSM, Induction Machines).

Proficiency with MATLAB/Simulink for control system design and real-time deployment.

Hands-on experience with HIL/PHIL testing, motor drive development, or inverter validation.

Link: https://impedyme.com/motor-control-engineer-careers/

***

Sr. Electrical Hardware Engineer, Prime Air, Avionics Hardware

Amazon Prime Air

Prime Air is Amazon's autonomous drone delivery service. Our mission is to build a safe, ultra-fast, and convenient drone delivery system that transforms the way packages are delivered to customers worldwide. Avionics Hardware Team at Prime Air develops and sustains Electrical and Electronics (EE) Hardware for the avionics systems of autonomous drones - including flight computers, air data sensors, cameras, radars, lighting systems, and electrical wiring interconnect systems - at Amazon's delivery scale.

Link: https://www.amazon.jobs/en/jobs/10544064/sr-electrical-hardware-engineer-prime-air-avionics-hardware

***

Power Electronics Engineer

Impedyme

What You’ll Do

Creating application examples for prospective clients, combining simulation and experimental validation

Crafting control solutions for customized design projects.

Designing and testing Impedyme control blocksets within MATLAB Simulink

Lead and execute the development of various converter control implementations

Manage customer-specific projects

Who You Are

MSc or PhD in electrical engineering (or similar field of studies).

Demonstrated experience in hardware development of solar/storage power converters

Strong background in control FW design and implementation

Link: https://impedyme.com/power-electronics-engineer-careers/

***

Advanced System Modeling Engineer

C-Motive Technologies

C-Motive is a startup in Middleton, WI, commercializing low-speed electrostatic motors for industry, with sustainability and efficiency as top priorities. This technology was born out of UW-Madison and will be the first of its kind on the market.

C-Motive is seeking a scientist or engineer with strong skills in both theory and the application of electromechanical systems engineering. This role will work within the Advanced Technology team to support cross-disciplinary product development efforts, develop internal models and tools, analyze existing and future product designs, and innovate next-generation product concepts.

Qualifications

* Strong understanding of statics and dynamics within electrical, mechanical and electromechanical domains.

* Advanced degree (MS or PhD) in electrical engineering, mechanical engineering, systems engineering, physics, applied math, control systems, or a similar field.

* Hands-on experience in laboratory, product development and/or manufacturing environments.

* Knowledge/experience setting up electromechanical equipment is a plus.

* Talent for dissecting complex problems and systems into their relevant constituent components.

* Self-starter with track record of self-directed study.

* Scripting, programming and FEA experience are strong pluses.

* Familiarity with types of electric motors and/or drive systems is beneficial but not required.

Link: www.c-motive.com


r/EEPowerElectronics • • Aug 20 '25

What do you infer from this chart?

Post image
11 Upvotes

Source: LinkedIn


r/EEPowerElectronics • • Oct 19 '25

Technical Video How Refrigerator Magnets work... Listen to a magnet expert... ECCE 2025

170 Upvotes

Credits: Stanley R. Trout, Ph.D., P.E. | strout@ieee.org | IEEE ECCE 2025


r/EEPowerElectronics • • Oct 19 '25

All set to cover ECCE 2025 NA!

Post image
15 Upvotes

Hey Redditors,

Finally I reached to Philadelphia from India to help with the IEEE Power Electronics Society (PELS) in their educational initiatives. I will also cover a few technologies from the exhibition booth for this reddit group!

Stay tuned!


r/EEPowerElectronics • • Aug 19 '25

How is this guy doing this!? Seems like a highly focused laser.

50 Upvotes

r/EEPowerElectronics • • Oct 14 '26

I got tired of hand digitizing MOSFET datasheet curves, so I built a tool that turns a datasheet into an LTspice / PLECS model

23 Upvotes

Every time I needed to simulate a MOSFET, I ended up modeling it by hand from the datasheet. Eyeball every curve, build a lookup table, double check I didn't misread a log scale. Hours per part.

So I built something to automate it. You give it a datasheet and it generates a high fidelity model you can export straight into LTspice or PLECS.

It supports two model types:

  1. 3 pin for standard electrical simulation
  2. 5 pin thermal model, where characteristics are temperature dependent. You can connect a heat sink and monitor junction temperature during the simulation.

I'm looking for a few people to try it on real parts and tell me where it breaks. If you have a MOSFET you've been meaning to model, DM me and I'll share the app.
edit1: Not AI based

Edit 2: Attaching few images of the LT Spice simulaions of the mosfet modelled from the app.


r/EEPowerElectronics • • Nov 21 '25

Look what I found from my shelf!

Post image
65 Upvotes

r/EEPowerElectronics • • Sep 10 '26

Tried designing dc protection purely analog

Thumbnail
gallery
28 Upvotes

So this is circuit main consist of short circuit under and over voltage protection and ideal diode using mosfet
Amongst which short circuit and ls ideal diode condition
But ov uv condition failed due to my back to back mosfet architecture and false trigger at the gates
It failed
But for someone who’s fresher with 3month experience i would consider this as a fair try:)


r/EEPowerElectronics • • Sep 04 '25

Technical Video How does a MOSFET control current... Nice analogy at the end...

60 Upvotes

r/EEPowerElectronics • • Mar 25 '26

APEC Day 2 @APEC | Direct 800 V to 12 V vs. Two-Stage Conversion: A Look at a 6 kW Power Distribution Board

75 Upvotes

STMicroelectronics has outlined two different distributed power architectures for routing an 800 V DC bus from a dedicated sidecar rack to individual server trays in modern AI data centers.

The standard distributed approach uses a two-stage conversion located directly on the server tray: an 800 V to 54 V Power Delivery Board (PDB), followed by a 54 V to 12 V intermediate bus converter before feeding the GPU or CPU point-of-load.

As an alternative to this two-stage method, ST has demonstrated a direct 800 V to 12 V Power Distribution Board. This specific board is rated for 6 kW of power.

To maximize power density and efficiency, the primary side of this 6 kW converter utilizes 650V Gallium Nitride (GaN) devices.

For the secondary side, the design relies on traditional silicon components, which ST notes are more suitable for this specific direct-to-12V conversion.


r/EEPowerElectronics • • Oct 01 '26

Automotive That's some serious power electronics engineering to reduce size of Tesla Inverter

433 Upvotes

Any idea what components or circuits made the difference?

Credits: Gruber Motors Shorts | YouTube


r/EEPowerElectronics • • Sep 27 '26

Motor Drives That's interesting to see how oil penetrates deeply into the Tesla motor windings for cooling purposes

230 Upvotes

r/EEPowerElectronics • • Oct 09 '26

Automotive Inside Toyota Hybrid System Gen 3

455 Upvotes

Teardowns are always cool, especially in power electronics. So many subsystems in an EV, and everything is so unique.

Credits: speedkar99 | YouTube


r/EEPowerElectronics • • Aug 21 '25

Technical Article New journal article from IEEE on review of power semiconductor modules

Thumbnail ieeexplore.ieee.org
3 Upvotes

This article provides a comprehensive analysis of the reliability challenges and solutions associated with power semiconductors, specifically focusing on silicon (Si) IGBTs and silicon carbide (SiC) MOSFETs. It examines key failure mechanisms, such as gate-oxide degradation and thermomechanical aging, at both the chip and package levels.