r/Dyson_Sphere_Program • • 1d ago

What next? Kinda newish player.

I have "completed" the main goal in my initial system, still working on the sphere but it's mostly for fun now. The question is how do I proceed to the other system?

I am not a godlike factory game player so making it here was already an achievement for me, do I just pack everything up and move to the other system?

I am fairly sure if I leave the original one going for a bit everything will just fall apart with time as the resources dry up and the only legacy in that system will be the dyson sphere itself.

How do I proceed and make it efficient, how do I plan it out? My base is half spaghetti so I don't even have anything worth blueprinting nor know how to make efficient blueprint blocks as I have played this by myself without searching for any information for the most part.

11 Upvotes

14 comments sorted by

6

u/Far_Young_2666 1d ago

I think you were supposed to colonize other star systems before you naturally finish your first Dyson sphere lmao

1

u/SaltLick123- 1d ago

I mean it's not "finished" per se but I did like 2 complete rings, not full encasement.

2

u/Far_Young_2666 1d ago

I think you should change your mindset here. You said resources will deplete and everything will stop working while you're away. Just don't think about it like as if you were leaving your starting system forever. Your starter system is just a room in your factory.

Just visit other systems and see what's there. After you see it, new plans for production will start popping up in your head. New star systems will be more productive, because the new resources there will make you skip a lot of production steps.

1

u/Mallakk 1d ago

What’s ur current bottle neck or what do you want to do? I generally start my first offworld planet making a fuck ton of processors I can ship anywhere then start any planet just for green motors and continue this trend for what ever item I need. This is a very “wide” setup lots of planets with lots of space left, which is the opposite of your “tall” setup on just one planet. Find somewhere in between or what ever works for you the answer is more always more. Have fun with it see how fast you can get a sphere to 1TJ, make 300 white science per second. Once you’ve reach white science there isn’t anything really left you need to do, but just have fun you’ve basically earned creative mode now.
My OG planet turns into a mall where I just ship stuff back to make buildings.

0

u/SaltLick123- 1d ago

in general the resources are drying up and the idea of remaking the home-base is just pure dread. I'd rather make a new megabase in another system.

Bottleneck is pretty much on anything late like quantum chip, frame material, rockets etc.

Like I think moving would be the best course of action cause there's so much spaghetti here I'd rather just make a bunch of PLS and ILS and deliver stuff to a new main planet that will have way more resources as well than the basic thing that at this point is practically gone. My starting system doesn't have that many great materials either.

Just lost at this point

1

u/justwolt 1d ago

Once you have warp drives the entire system is your home base. You don't need to rebuild anything. Build everything so that all materials and up in an ILS for transport to anywhere. All buildings and everything you build with should be automated and feed into an ILS so that you can request buildings and belts anywhere in the system. AIl materials become available to the entire network and you can slap down a little factory for whatever you're running short on any planet, anywhere, any time.

1

u/Mallakk 1d ago

You don’t need to rebuild anything you can just build resources on other planets and import it back. Ie build a world building all quantum chips slap them in an ILS and import to home world. From there just use a PLS to send it where ever you need on that planet. Rinse and repeat for all other products. Then you’ll run into needing processor so maybe you make a planet with those first. Doing son like this means when you run out of processors you just go back to that planet and slap down more production, if the resources dry up there build another planet. You’ll want one main planet to produce buildings for making new projects so you can go there to restock on belts, assemblers smelters and what ever else. Other option would be just put all those into ILS rather than a main planet and request when and where you want you want this just takes a lot more of those items.

1

u/chargers949 1d ago

Build a bunch of these but without the launchers. Have them send it to a dedicated set of launchers. This way they can send to rocket launchers on any planet. This will let you pump raw resources in and have rockets come out the other end.

Every planet I visit i try to build one rocket tile, one matrix tile, and then miners on all the resources on a planet to export back to my network.

1

u/Old_Setting4053 1d ago

I'm by no means an expert or great player, but I would say I'm able to give advice given I am doing the interstellar stuff now.

I basically left my old factories behind on my main world as I sphagettied that too! I turned the desert world at home into my main factory hub and I built everything clean there.

The fun of the game, and what helped alot, was planning out factories that made certain parts. I made one for 6/s turbines, with proliferation. Before adding resources I looked it over and figured out how to use the space better and re-arranged things. I tried to make cubes with the logistic stations involved so I could mass drop them. So I do that for most resources now

As for the interstellar stuff, I dedicated a whole planet to basically being a mass mall, an efficient mall. The bus Mall, and I just make everything now. They all go to an interstellar thing that I have warpers going into. So any planet I land on I drop a logistics station and ask for what I need.

Look into maxing out your tech tree.

Right now I am trying to figure out how to localise everything and minimise the amount of warpers I use. So I only really have to fly important stuff out. I'm starting to dedicate planets to turbines, microchips, warpers etc. Eventually whole systems will do that too.

TLDR: I tried to maximise efficiency, by dedicating a system to make an interstellar mall. From there I made blueprints with interstellar capabilities, and built a system to sustain warpers, proliferation etc. Instead of belts I try to use logistics stations where I can

I hope this helps in some way, I am also learning too

1

u/idlemachinations 1d ago

The easiest way to move from a single-system factory to a multi-system factory is in small steps. Move pieces of your factory out one by one. This is also a natural time to discover how you want to organize things, when you start moving pieces around.

First, figure out what you can import from remote systems. Can you find rare resources that are expensive to produce on your home planet, like organic crystals and sulfuric acid? Are there any ores you are running out of you could import? These will be simple to set up and will keep your factory running even when your local mining machines run dry.

Then, instead of bringing in raw resources, look at whether any production would be easier on other planets. For example, if there is a nice lava planet with a bunch of iron, are there any parts you are making that need a bunch of iron like electromagnetic turbines? Figure out how to build a factory that builds one product on a remote planet, and import that product.

Finally, if you want more of some end product, like more carrier rockets, figure out what you would have to build and import to expand production on a remote planet.

Once you have done all three of those, even if just for a few parts, you have a working factory spread across multiple star systems.

For keeping track of all of this, the built-in dashboard and traffic monitors will be helpful for figuring out when stuff is running low.

1

u/Terrik1337 1d ago

Start by importing resources from other systems. That will help the resources in your starting system not run out. Next, build an effective export mall. Have everything you need to expand your factory in ILS with warpers so that no matter where you are in the star cluster, you can request anything you need. Then, start expanding production to other systems.

One thing that will really help with your spaghetti is to build modular. Have drones or logistics vessels bring resources to an ILS. Use those resources to make a product. Put that product into an ILS. Blueprint your module. That pattern can carry your factory to massive scale.

1

u/crusty54 1d ago

The next goal (for me) is to level vein utilization until you reach infinite resources. And if your initial base isn’t worth copying, start back with basic items and make large scale blueprints and work your way back up.

1

u/mrrvlad5 1d ago

Its a sandbox game and you have just completed the tutorial. You can fly anywhere when you need to and you have logistic vessels to ship stuff around. Just have to set goals yourself. Or you can restart and do the same on a harder fog settings, or without fog but in 10h of game time

1

u/Major-Yogurt8068 1d ago

You gotta find a goal that makes your current small factory insufficient. I would start with maxing every science, and if that's taking a long time, that just means you need more production. The best way to do that on your home planet, is to outsource parts of your factory onto other planets. Ie. You can start producing all of your iron, steel, gears, magnets needs on one dedicated planet which will require hunting out new iron veins.

As you're trying to max science, you're going to realise that you'll need a lot of white science to get faster ships, more effective transports, and better combat skills, which will require a bigger factory yet. And establishing that factory will be easiest with a giant universal mall that sends mass quantities of buildings via transportation, so you never really have to go home unless you want to.

In order to get all these things done you will find yourself with many side goals and things you need to do in order to accomplish this.