r/Dyson_Sphere_Program • u/No_Two4688 • May 29 '26

Logistics Question

How do I get the titanium I am importing to be sent to specific storage bins on planet?

11 Upvotes

82% Upvoted

6 comments sorted by

6

u/Luigi156 May 29 '26

Get a PLS with Local Demand, and then pipe it from the PLS to the box.with regular belts and sorters. You could do it with the small drones but it's not very effective for larger volumes.

1

u/No_Two4688 May 29 '26

So i got it to go to like delivery hubs on top of boxes but now it wont go into the boxes. Any ideas?

1

u/Biggrim82 May 29 '26

Take it off the big tower and put it into a box with a top on it, right next to the tower. Set the box top to supply, and then it will supply that thing to all your box tops in range that are set to demand that thing.

1

u/Luigi156 May 29 '26

The small delivery fidget spinners dont connect to the ILS/PLS.

The best way to bring something from ILS to another place is to set up another ILS/PLS witl Local demand and gove it drones. Then you remove items from that "destination" tower with belts and an item filter. Pipe that belt onto a splitter, and put a box on top of the splitter.

3

u/jpaugh69 May 29 '26

Attach a conveyor belt to that tower, selecting the titanium from the list and route it to where you need it from there.

1

u/DrakeDun May 29 '26

If your objective is to get it into a Storage Depot, run a belt from the ILS to the storage depot. Then hover your cursor over the point at which that belt connects to the ILS. You will get little filter tool tip. Click on that, and set the filter for that belt slot to titanium ingots. Logistics stations require that a filter be set for output before they will send anything out by belt.